GREEN DERV PROJECT FOR SALE

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GREEN DERV PROJECT FOR SALE
well just had a phone call of the gf. witch she is about 20mins away and im at home. here goes

her: cars locked it self
me: ok and?
her: its ticking over and im outside of it
me: SHIT!!! no fans erm break in
her: ok how
me: bend back the door
her: i cant it hurts my fingers. can i get through the boot?
me: ye but u gota break the boot badge Sad. better hurry up before engine over heats
her: call you back
me: awaiting now to see the damage Sad
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
Uh oh.....! Need some fans me thinks...!
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
ano. awaiting for her to come back and the boot scratched to hell with missing fingers stuck in the door
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
just smash the window . . . . . . easy to replace mate, done it myself . . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
guna tell her to when she rings. good job i got a replacement.
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
Smash rear quarter window? easy to replace
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
just told her to lol. on another note the temp is at 90 now Sad
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
(23-10-2012, 08:43 PM)karl1989 Wrote: just told her to lol. on another note the temp is at 90 now Sad

90 is fine don't want it creeping much past though . Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
ano but were talking about a women throwing a brick at a tinted window at night
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
(23-10-2012, 08:46 PM)karl1989 Wrote: ano but were talking about a women throwing a brick at a tinted window at night

haha . . when my missus damaged my old car i told her it was hers and bought a new one . .Big Grin
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
i didnt think of that ninja

good news she in, window isnt broke but my boot lock is.
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
Just saw her about half hour ago too near lane ends... thought it was you at first


S2 HDi >click<
154bhp
280lbs/ft
Reply
Thanks given by:
(23-10-2012, 10:03 PM)Arron Wrote: Just saw her about half hour ago too near lane ends... thought it was you at first

haha ye you just seen us again with sumat broken lol

well another broken update Rolleyes. reversing onto a curb and bwarp exhaust come of GREAT!!!!!. so needed a jack asap to put it back on the hangers till i got home and luckily found some wood Smile. heres my temp car jack Smile

[Image: Photo0502_zpseb5d27b4.jpg]
[Image: photo0503_zps03c7168e.jpg]

there was a big stack so took 2 just for the future incase Smile. the good update i have a plate welded behind the boot badge so ready for filler and soon be nice and smooooooooooootttttttthhhhhhhhhhhh
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
up-date. due to the car locking its self and the boot badge having been destroyed i decided to get it smoothed. 1st was to get a plate welded in place then smoothing. sorry forgot to get more pictures. only got 2. want to give big rep to alee and thank you for helping me. here is what its like so far. has had 1 coat but no point in getting a picture till done.
when primerd

[Image: Photo0505-1.jpg]
[Image: photo0506-1.jpg]

will upload another picture when its finished. now thinking of smooting the rear bumper. front is getting done before christmas and mabe some borbet A's will be bought Smile
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
That's a shit job....







Trolololll! Big Grin
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
Borbets are the shiz.

Smoothing looks good.


S2 HDi >click<
154bhp
280lbs/ft
Reply
Thanks given by:
Looking good mate.
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
got a few ideas on the mind. photo shopping to see Smile
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
You is photoshopping....? What now? Smile
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
secret ninja
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
well just purchased a ph2 front bumper in good condition with fogs. will be going to spray shop soon . cant wait
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
Well not a big up-date. Got my self a new ignition and locks for the car of liam. Getting a drivers hub and do bottom arm nextweek. Also wanting rid of the nimrods. On the prowl for more challengers
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
pic that kyle took today on m62

[Image: 216208_10152242185620392_1707328882_n.jpg]
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
This car looks epic on challengers! Good luck with your quest lol
Doesnt even own a 306.
Reply
Thanks given by:
well i havent up-dated this for a while so i better keep it alive. i purchased a ph2 bumper a while back and just booked it in to the spray shop for the number plate recess to be smoothed. dropping it of on saturday Smile. also getting a quote on boot blowing in. so should have pics next week. ordering pressed plate at the weekend. plans after will be to up-grade to a HDI axle Smile. here is the spray shop. he doesnt update his site much but here is http://www.lees-autos.com/
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
up-date. bumper should be ready this week and my pressed plates should be here thursday Smile. also purchased this little goody tonight Big Grin Booooooost time

[Image: Photo0584.jpg]
[Image: Photo0585.jpg]
[Image: Photo0586.jpg]
[Image: Photo0588.jpg]
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
How are you going to get get a filter over that inlet? Just seive it? Lol
Doesnt even own a 306.
Reply
Thanks given by:
(04-12-2012, 08:28 PM)Tom Wrote: How are you going to get get a filter over that inlet? Just seive it? Lol

not thought of that yet lol. maybe a reducer
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
got a package delivered with these today Smile. shiney and pressed. just waiting for bumper now.

[Image: Photo0590.jpg]
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
Pressed plates =Win.


S2 HDi >click<
154bhp
280lbs/ft
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Diablo Hdi. Project speed! Up for sale! underground375 46 10,934 22-02-2014, 09:23 AM
Last Post: JethroJay
  Miami Phase 1 XUD Project! FOR SALE £800 Stephen 263 64,264 08-12-2013, 11:32 PM
Last Post: Stephen
  Black Rallye Project - For sale soon Mitch 17 7,678 06-10-2013, 08:29 PM
Last Post: Stephen

Forum Jump:


Users browsing this thread: 2 Guest(s)