Thread Rating:
  • 2 Vote(s) - 3.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
XUD RR results *THE BIBLE*
#1
Think it would be a good idea to possibly have a stickied thread made with all the peoples RR results with spec, just so it gives some people ideas on whats achievable, so if an admin/mod and the rest of the forum agree, it would be nice to have them all in one place.

Standard/Factory Tune

Stage 1 Tunes (Standard Turbo)
124bhp, 204lb/ft - T2 @ 19psi, 9mm - Mitch.
133bhp, 228.6lb/ft - T2 FMIC 9mm bosch - Mac22.
133.7bhp, 188lb/ft - K14 @ 23psi, 9mm - Autotronix - Mattcheese31.
151.9bhp, 230lb/ft - T2 @ 30psi, 9mm - Dyno Dynamics - Ginge191.

Stage 2 Tunes (Bigger Turbo / FMIC / Pump Mods)
144.9bhp, 190lb/ft - T2 @ 28psi, FMIC, 11mm - Padge.
146.3bhp, 251lb/ft - K14, 11mm - Ruan.
150.8bhp, 219.4lb/ft - Ko3 @ 20 psi FMIC 10mm bosch - Frosty.
153bhp, 286lb/ft - GT15 @ 30+psi, FMIC, 11mm, LDA pin - Anto.
154.3bhp, 198.6lb/ft - GT17 FMIC 9mm bosch - Jimbo.
160bhp, 248lb/ft - Saab T25 28psi, FMIC, 11mm bosch - RStuning - Padge.
174bhp, 273lb/ft - TD04 @ 27psi, FMIC, 11mm - zx_volcane.
175.3bhp, 313lb/ft - GT2052V, 11mm, Meth/Water Injection - Ruan.
178bhp, 247lb/ft - TD04 @ 25psi, 9mm - Danny2009.
179bhp, 250lb/ft - TD04 @ 30+psi, FMIC, 11mm, LDA pin - Anto.
189.9bhp, 240lb/ft - KKK K04, FMIC, Bosch - Strictly Derv.
194.3bhp, 242lb/ft - GT22V @ 19psi, FMIC, 10mm (Gov'd & LDA), 2.5" Exhaust, ARP Studs - mr_fish
196bhp, 290.6lb/ft - NOS, TD04 @ 33psi, 9mm Bosch (Gov mod & LDA) - LewisG306.

Stage 3 Tunes (Crazy Shit aka 200BHP+)
208BHP, 275lb/ftb - GT22V (Arduino Control), FMIC, 11mm, Water/Meth Injection, Fully Rebuilt & Balanced, Lightened Flywheel - zx_volcane.
209.9bhp, 300lb/ft - GT2556 Hybrid, Modified 9mm - Jammapic.
223bhp, 278lb/ft (XUD11) - T3-T4 @ 1.1bar, FMIC, NOS - ?.
237bhp & 327 ft/lbs - GTB22V, all of above on veg - zx_volcane.
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by: Tc306
#2
We have all the results from the RR we had at longcross; but scepticism surrounds them so is questionable whether to post them or not... Doh
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#3
Get them up mate, just explain in the post why you think there sceptical.
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#4
I'll chuck mine on anyway, there was a few i could add, but i suppose it's not my place to ThumbsUp
Padge; TBH you could compile them into the first post? that way the first post is the bible/benchmark Smile


1. Peugeot 205 - 1.9DT, 9mm, T2 @30psi - 151.9bhp / 230ftlb - Dyno Dynamics - sceptic dyno/rpm reading
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#5
Yeah im going to copy each result and put them in my original post mate Smile
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#6
Not a bad idea padge
Reply
Thanks given by:
#7
Im surprised it's not been done before tbh chris.
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#8
Surely the issue with this is the massive possible inaccuracy with any dyno run? I always take any dyno figures with a massive dose of salt.
[Image: sigcopy-1.jpg]
Diablo Meridian HDi - 125bhp - 73.0MPG - Halfords Wheels
Reply
Thanks given by:
#9
Stage 2 hdi.ko3s hybrid 167.9bhp and 295 ft/lbs
Reply
Thanks given by:
#10
Mattcheese31: K14 - Bosch 9mm - 23psi - 133.7 bhp - 188ftlbs - Autotronix . . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#11
Shaun I'll do a thread in the hdi section when I get home.
Reply
Thanks given by:
#12
I did this on .net

but it never really went very far.
I had a pic of the map for proof too
Wishes for more power...
Reply
Thanks given by:
#13
Cos a pic makes the dyno more accurate?

Threads like this don't get anywhere because of a) trolls and b) people who can't handle trolls.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#14
Danny2009: td04 9mm pump 25 psi top mount 178 Bhp 247 lb ft torque
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#15
(17-07-2013, 09:11 AM)Poodle Wrote: Cos a pic makes the dyno more accurate?

Threads like this don't get anywhere because of a) trolls and b) people who can't handle trolls.

no but better proof than just word...ya know 'mine makes 220bhp and 300lbs' without proof!
Wishes for more power...
Reply
Thanks given by:
#16
Like I said lads, I know some Dynos are a bit off etc, but it gives some idea of what the "guideline" of a certain setup should achieve, reason it never got set off on theywhoshallnotbenamed is probably because back in them days not many people had big turbos/pumps, more people are doing it now and wanting to see what power there roughly getting.

Yeah sorry sean, I just want this to be XUD related.
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#17
Ive started a thread in the HDi section for HDi peeps and set a format for it.
Reply
Thanks given by:
#18
Mitch: t2, 19psi, 9mm bosch, 124 bhp and 204 ft/lbs.
Blaze '6 and Blaze D-turbo!
Reply
Thanks given by:
#19
Kkk K04, Forge FMIC "modded" pump 189.9BHP 240ft-lbs
Stage 2 XUD Sedan
Reply
Thanks given by:
#20
Hmm, considering dyno'ing the tank when the 10mm pump goes on. I'm more scared of being tremendously disappointed though haha.
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#21
Jammapic: GT2556 titanium hybrid, 9mm + many mods, 209.9hp & 300lbft
JP
Reply
Thanks given by:
#22
Posted previously on another thread results I've had after various stages can't remember the thread now
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#23
i know which thread jenks, ill sort it tomorrow and update my original post
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#24
My old ZX :

TD04 @ 27psi, 11mm Pump, FMIC

174 BHP and 273 ft\lbs
Reply
Thanks given by:
#25
Anto's 1st run - GT15 - 11mm - fmic - homemade boost pin - 30+psi - 153bhp - 286ftlbs (ave over 3 runs)
Anto's 2nd run - TD04 - 11mm - fmic - homemade boost pin - 30+psi - 179bhp - 250ftlbs (ave over 3 runs)

All done at Torque Performance NI on a Sun Dyno
Reply
Thanks given by:
#26
Ruan

Old DT with K14, TMIC, 11mm pump - 146.3HP 251.2lb.ft torque
DT with GT2052V, TMIC, 11mm, Water Injection - 175.3hp 313lb.ft torque.

I'll find the graphs later, they are around somewhere.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#27
Bump, updated thread, can we have this as a sticky?
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#28
I made it all sticky
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#29
thanks matt.
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#30
No worries Smile
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Dyno Results inside! (and questions) Jimbo 30 6,074 13-06-2014, 10:22 AM
Last Post: zx_volcane
  My dyno results Mac22 8 1,247 12-06-2014, 03:26 PM
Last Post: Mac22
  Bosch, T2, stage one, dyno results? Mitch 22 8,251 14-04-2013, 08:36 AM
Last Post: Mitch

Forum Jump:


Users browsing this thread: 1 Guest(s)