306oc - Peugeot 306 Owners Club & Forum
XUD RR results *THE BIBLE* - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: XUD RR results *THE BIBLE* (/showthread.php?tid=15608)

Pages: 1 2 3 4 5 6 7


XUD RR results *THE BIBLE* - padge - 17-07-2013

Think it would be a good idea to possibly have a stickied thread made with all the peoples RR results with spec, just so it gives some people ideas on whats achievable, so if an admin/mod and the rest of the forum agree, it would be nice to have them all in one place.

Standard/Factory Tune

Stage 1 Tunes (Standard Turbo)
124bhp, 204lb/ft - T2 @ 19psi, 9mm - Mitch.
133bhp, 228.6lb/ft - T2 FMIC 9mm bosch - Mac22.
133.7bhp, 188lb/ft - K14 @ 23psi, 9mm - Autotronix - Mattcheese31.
151.9bhp, 230lb/ft - T2 @ 30psi, 9mm - Dyno Dynamics - Ginge191.

Stage 2 Tunes (Bigger Turbo / FMIC / Pump Mods)
144.9bhp, 190lb/ft - T2 @ 28psi, FMIC, 11mm - Padge.
146.3bhp, 251lb/ft - K14, 11mm - Ruan.
150.8bhp, 219.4lb/ft - Ko3 @ 20 psi FMIC 10mm bosch - Frosty.
153bhp, 286lb/ft - GT15 @ 30+psi, FMIC, 11mm, LDA pin - Anto.
154.3bhp, 198.6lb/ft - GT17 FMIC 9mm bosch - Jimbo.
160bhp, 248lb/ft - Saab T25 28psi, FMIC, 11mm bosch - RStuning - Padge.
174bhp, 273lb/ft - TD04 @ 27psi, FMIC, 11mm - zx_volcane.
175.3bhp, 313lb/ft - GT2052V, 11mm, Meth/Water Injection - Ruan.
178bhp, 247lb/ft - TD04 @ 25psi, 9mm - Danny2009.
179bhp, 250lb/ft - TD04 @ 30+psi, FMIC, 11mm, LDA pin - Anto.
189.9bhp, 240lb/ft - KKK K04, FMIC, Bosch - Strictly Derv.
194.3bhp, 242lb/ft - GT22V @ 19psi, FMIC, 10mm (Gov'd & LDA), 2.5" Exhaust, ARP Studs - mr_fish
196bhp, 290.6lb/ft - NOS, TD04 @ 33psi, 9mm Bosch (Gov mod & LDA) - LewisG306.

Stage 3 Tunes (Crazy Shit aka 200BHP+)
208BHP, 275lb/ftb - GT22V (Arduino Control), FMIC, 11mm, Water/Meth Injection, Fully Rebuilt & Balanced, Lightened Flywheel - zx_volcane.
209.9bhp, 300lb/ft - GT2556 Hybrid, Modified 9mm - Jammapic.
223bhp, 278lb/ft (XUD11) - T3-T4 @ 1.1bar, FMIC, NOS - ?.
237bhp & 327 ft/lbs - GTB22V, all of above on veg - zx_volcane.


RE: RR results *THE BIBLE* - ginge191 - 17-07-2013

We have all the results from the RR we had at longcross; but scepticism surrounds them so is questionable whether to post them or not... Doh


RE: RR results *THE BIBLE* - padge - 17-07-2013

Get them up mate, just explain in the post why you think there sceptical.


RE: RR results *THE BIBLE* - ginge191 - 17-07-2013

I'll chuck mine on anyway, there was a few i could add, but i suppose it's not my place to ThumbsUp
Padge; TBH you could compile them into the first post? that way the first post is the bible/benchmark Smile


1. Peugeot 205 - 1.9DT, 9mm, T2 @30psi - 151.9bhp / 230ftlb - Dyno Dynamics - sceptic dyno/rpm reading


RE: RR results *THE BIBLE* - padge - 17-07-2013

Yeah im going to copy each result and put them in my original post mate Smile


RE: RR results *THE BIBLE* - Dum-Dum - 17-07-2013

Not a bad idea padge


RE: RR results *THE BIBLE* - padge - 17-07-2013

Im surprised it's not been done before tbh chris.


RE: RR results *THE BIBLE* - Kezzieboy - 17-07-2013

Surely the issue with this is the massive possible inaccuracy with any dyno run? I always take any dyno figures with a massive dose of salt.


RE: RR results *THE BIBLE* - Just Sean - 17-07-2013

Stage 2 hdi.ko3s hybrid 167.9bhp and 295 ft/lbs


RE: RR results *THE BIBLE* - Mattcheese31 - 17-07-2013

Mattcheese31: K14 - Bosch 9mm - 23psi - 133.7 bhp - 188ftlbs - Autotronix . . .


RE: RR results *THE BIBLE* - Dum-Dum - 17-07-2013

Shaun I'll do a thread in the hdi section when I get home.


RE: RR results *THE BIBLE* - Piggy - 17-07-2013

I did this on .net

but it never really went very far.
I had a pic of the map for proof too


RE: RR results *THE BIBLE* - Poodle - 17-07-2013

Cos a pic makes the dyno more accurate?

Threads like this don't get anywhere because of a) trolls and b) people who can't handle trolls.


RE: RR results *THE BIBLE* - Danny2009 - 17-07-2013

Danny2009: td04 9mm pump 25 psi top mount 178 Bhp 247 lb ft torque


RE: RR results *THE BIBLE* - Piggy - 17-07-2013

(17-07-2013, 09:11 AM)Poodle Wrote: Cos a pic makes the dyno more accurate?

Threads like this don't get anywhere because of a) trolls and b) people who can't handle trolls.

no but better proof than just word...ya know 'mine makes 220bhp and 300lbs' without proof!


RE: RR results *THE BIBLE* - padge - 17-07-2013

Like I said lads, I know some Dynos are a bit off etc, but it gives some idea of what the "guideline" of a certain setup should achieve, reason it never got set off on theywhoshallnotbenamed is probably because back in them days not many people had big turbos/pumps, more people are doing it now and wanting to see what power there roughly getting.

Yeah sorry sean, I just want this to be XUD related.


RE: XUD RR results *THE BIBLE* - Dum-Dum - 17-07-2013

Ive started a thread in the HDi section for HDi peeps and set a format for it.


RE: XUD RR results *THE BIBLE* - Mitch - 17-07-2013

Mitch: t2, 19psi, 9mm bosch, 124 bhp and 204 ft/lbs.


RE: XUD RR results *THE BIBLE* - strictly_perv - 17-07-2013

Kkk K04, Forge FMIC "modded" pump 189.9BHP 240ft-lbs


RE: XUD RR results *THE BIBLE* - cwspellowe - 17-07-2013

Hmm, considering dyno'ing the tank when the 10mm pump goes on. I'm more scared of being tremendously disappointed though haha.


RE: XUD RR results *THE BIBLE* - jammapic - 17-07-2013

Jammapic: GT2556 titanium hybrid, 9mm + many mods, 209.9hp & 300lbft


RE: XUD RR results *THE BIBLE* - Jenkosowls - 17-07-2013

Posted previously on another thread results I've had after various stages can't remember the thread now


RE: XUD RR results *THE BIBLE* - padge - 17-07-2013

i know which thread jenks, ill sort it tomorrow and update my original post


RE: XUD RR results *THE BIBLE* - zx_volcane - 19-07-2013

My old ZX :

TD04 @ 27psi, 11mm Pump, FMIC

174 BHP and 273 ft\lbs


RE: XUD RR results *THE BIBLE* - anto - 19-07-2013

Anto's 1st run - GT15 - 11mm - fmic - homemade boost pin - 30+psi - 153bhp - 286ftlbs (ave over 3 runs)
Anto's 2nd run - TD04 - 11mm - fmic - homemade boost pin - 30+psi - 179bhp - 250ftlbs (ave over 3 runs)

All done at Torque Performance NI on a Sun Dyno


RE: XUD RR results *THE BIBLE* - Ruan - 21-07-2013

Ruan

Old DT with K14, TMIC, 11mm pump - 146.3HP 251.2lb.ft torque
DT with GT2052V, TMIC, 11mm, Water Injection - 175.3hp 313lb.ft torque.

I'll find the graphs later, they are around somewhere.


RE: XUD RR results *THE BIBLE* - padge - 22-07-2013

Bump, updated thread, can we have this as a sticky?


RE: XUD RR results *THE BIBLE* - Matt - 22-07-2013

I made it all sticky


RE: XUD RR results *THE BIBLE* - padge - 22-07-2013

thanks matt.


RE: XUD RR results *THE BIBLE* - Matt - 22-07-2013

No worries Smile