Login

**Nathan1305** · 01-02-2015, 12:31 PM

Long story but I need the return line for my power steering on my XUD Smile

[attachment=21475]

bashbarnard · 01-02-2015, 12:43 PM

That's not a xud its a gti6. That's not a return line its the pas fluid cooler believe it or not. Some came with them some didn't. You can just remove and bypass. Easy as hell. Smile

**Nathan1305** · 01-02-2015, 12:48 PM

(01-02-2015, 12:43 PM)bashbarnard Wrote: That's not a xud its a gti6. That's not a return line its the pas fluid cooler believe it or not. Some came with them some didn't. You can just remove and bypass. Easy as hell.

I know but the pipe is the same, its a pic online and how do you bypass it? It was pissing out pas fluid

Seb_Ryan · 01-02-2015, 12:57 PM

Follow it up to where it connects to the rubber hoses and join the 2 hoses together

**Nathan1305** · 01-02-2015, 12:58 PM

(01-02-2015, 12:57 PM)Seb_Ryan Wrote: Follow it up to where it connects to the rubber hoses and join the 2 hoses together

Oh sweet I'll do that then Smile

**Niall** · 01-02-2015, 12:59 PM

Yeah as above just join the two hoses. Mine had a cooler with a tiny leak on it. Did away with it with the new engine and never had any issues!

**Nathan1305** · 01-02-2015, 06:26 PM

(01-02-2015, 12:59 PM)Niall Wrote: Yeah as above just join the two hoses. Mine had a cooler with a tiny leak on it. Did away with it with the new engine and never had any issues!

Sweet

you need a small bit of joining pipe?

bashbarnard · 01-02-2015, 06:31 PM

Yeah. So what you go is gut the cooler. Cut a good bit out and use that as the join. Wink

Toms306 · 01-02-2015, 06:33 PM

A PAS cooler on an XUD!? Whats the point lol? I'm sure I've never seen one on a ph3 until the GTi!

bashbarnard · 01-02-2015, 06:36 PM

2 of mine had coolers. My current one doesn't. Lus two havnt. No idea why

**Nathan1305** · 01-02-2015, 09:03 PM

(01-02-2015, 06:31 PM)bashbarnard Wrote: Yeah. So what you go is gut the cooler. Cut a good bit out and use that as the join.

That's a good idea Smile

I'll have a go at it Wednesday

Seb_Ryan · 01-02-2015, 09:05 PM

(01-02-2015, 09:03 PM)Nathan1305 Wrote:
(01-02-2015, 06:31 PM)bashbarnard Wrote: Yeah. So what you go is gut the cooler. Cut a good bit out and use that as the join.

That's a good idea I'll have a go at it Wednesday

Thats what i did, used the u bend for it

**Nathan1305** · (This post was last modified: 01-02-2015, 09:14 PM by Nathan1305.)

(01-02-2015, 09:05 PM)Seb_Ryan Wrote:
(01-02-2015, 09:03 PM)Nathan1305 Wrote:
(01-02-2015, 06:31 PM)bashbarnard Wrote: Yeah. So what you go is gut the cooler. Cut a good bit out and use that as the join.

That's a good idea I'll have a go at it Wednesday

Thats what i did, used the u bend for it

Will do

the pas pump is whining like a bitch now haha still very light steering though even though it's lost almost all its fluid Confused

Toms306 · 02-02-2015, 09:44 AM

306s never have very light steering. Tongue

Don't run it without any fluid though, you'll damage the pump.

**Nathan1305** · 02-02-2015, 10:33 AM

(02-02-2015, 09:44 AM)Toms306 Wrote: 306s never have very light steering. Don't run it without any fluid though, you'll damage the pump.

Getting some fluid today and going to try fix it tomorrow Smile

**bigcheez2k3** · 02-02-2015, 12:34 PM

Never knew they had coolers, didn't realise it was something that got hot enough to need one.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Wanted: Bosch fuel return banjo	306pc	3	1,724	01-04-2016, 06:02 AM Last Post: Piggy
	Hdi injector return pipes	Josh_Quant	3	1,424	02-01-2016, 06:57 PM Last Post: Josh_Quant
	Wanted: K14 or T2 Oil return flange/pipe	306Puggy	13	3,542	26-04-2014, 06:48 PM Last Post: 306Puggy