Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wire with metal hanging down near clutch pedal
#1
Hello whats this hanging down with a wire and metal thing near clutch pedal?

Where it ment to go?

[Image: DSC01270.jpg]
#2
Odd. Is there anything in reach it looks likenit could connect to?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#3
this was answered a few years back and for the life of me i cant remember what it was used for...
Phaes 1 GTI 6  -  Onyx Black
#4
Wasn't it something to do with the heaters like a probe
[Image: SDC10442-1.jpg]
#5
If you look right at the back of the foot well, you will see a small hole it goes into. You will need to straighten it up though as its bent.
It's a temperature probe for your "climate control"
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#6
Jonny b Wrote:Wasn't it something to do with the heaters like a probe

something like that, i know it wasnt anything essential but an added option...

iirc, it was put down to "Is everything still working, if so, dont worry.."
Phaes 1 GTI 6  -  Onyx Black
#7
NiallHarper Wrote:If you look right at the back of the foot well, you will see a small hole it goes into. You will need to straighten it up though as its bent.
It's a temperature probe for your "climate control"

How does the climate control work or what does it do?
#8
Means you can make it rain or snow, or anything like that really. Or at least that's what it should do, what it actually means once you've removed the marketing bs, is "blowers" lol.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



#9
Poodle Wrote:Means you can make it rain or snow, or anything like that really. Or at least that's what it should do, what it actually means once you've removed the marketing bs, is "blowers" lol.

lol this, apart from it keeps the cabin at a constant temp, your temp dial will have *C round the edge of it IIRC Smile

But yeah, I remember that thread, it was, as said already, a probe for the climate control from a duct in the drivers footwell.
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
#10
its the shear pin that holds the steering columb together whistle
#11
NiallHarper Wrote:If you look right at the back of the foot well, you will see a small hole it goes into. You will need to straighten it up though as its bent.
It's a temperature probe for your "climate control"

I will straighten it up then put the probe sensor in the hole.
#12
I have had this on all my cars, I was sure i read that the sensor for climate control was in the console on the roof but might be wrong.
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
#13
HDIkyle Wrote:I have had this on all my cars, I was sure i read that the sensor for climate control was in the console on the roof but might be wrong.

This is the sensor for the air temp in the ducting coming out of the vents IIRC Smile
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
#14
Im surprised we managed to get to February for someone to ask this lol next it will be the pipes off the fuel filter and header tank lol
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
#15
Peugeot Anal probe for Mice/Similar sized furry creatures, optional extra apparently.
[Image: Atterz.jpg]
#16
Were the end of the probe facing to the right there a rubber gromit. I straighten it out the probe and it pluged in there job done.

thanks everyone.


Possibly Related Threads…
Thread Author Replies Views Last Post
  wire identification pug306driver 0 2,153 04-12-2019, 10:53 AM
Last Post: pug306driver
  Wire thickness for cooling fan philpemberton94 3 3,156 17-04-2015, 04:47 PM
Last Post: philpemberton94
  Random Wire Off Starter Eddleston 3 3,404 03-12-2014, 04:42 PM
Last Post: Niall

Forum Jump:


Users browsing this thread: 2 Guest(s)