| 
		
	
	
	
		
	Posts: 105 
	Threads: 15 
	Joined: Mar 2012
	
 Reputation: 
0 Location: Suffolk/devon
 Car Model/Spec: Meridian HDI Estate 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Just wanted to post up the results of a few lighting mods on my HDi Estate. 
First was under mirror LED White puddle lights, wired into the phase 3 courtesy light circuit. 
 
They are very bright and look sweet, come on when car is unlocked or door opened, they stay on till ignition, time out or car locked. Great if you drop something or in the dark old countryside!
     
The next is LED floodlights in the boot lid, this one is very effective (probably more useful than the first   )
 
The lighting in the boot is appalling, as I'm sure you have all noticed, especially without the courtesy lights on. The estate is particularly bad, if you put anything big in the boot you get plunged into darkness! I really wanted to fix this so added these lights.
 
These are wired into the boot open microswitch. 
      
		
	 
	
	
	
		
	Posts: 7,825 
	Threads: 465 
	Joined: Dec 2011
	
 Reputation: 
114 Location: Cullompton Devon
 Car Model/Spec: Vauxhall
     Thanks: 1Given 98 thank(s) in 92 post(s)
 
 
	
	
		i like the idea of the rear led floodlights but you can keep the mirror light  
		
	 
	
	
	
		
	Posts: 19,854 
	Threads: 581 
	Joined: Dec 2011
	
 Reputation: 
195 Location: Bournemouth
 Car Model/Spec: Supercharged 306 GTi6
       Thanks: 36Given 82 thank(s) in 78 post(s)
 
 
	
	
		mirror lights arnt a good idea if you have run them straight off the interior light!They are powered via the bsi which is only rated to a very minimum amperage. Top this and there is a chance you could wreck the bsi which then means either new ecu, key and bsi or take it to someone with PP to program in a new bsi.
 
 Personally id do it via a relay but problem is there, its not a stable voltage. It varies so getting a relay to work properly (and last) and not make funny noises is fun. You can do a simple bit of circuitry and have it so the relay only activates at 12v but then the puddle lights will be on/off. None of this fading in/out
 
Team Eaton
 
 1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
 
 
		
	 
	
	
	
		
	Posts: 20,092 
	Threads: 591 
	Joined: Nov 2012
	
 Reputation: 
54 Location: Cotswolds
 Car Model/Spec: Stage 13 16v HDi
       Thanks: 22Given 68 thank(s) in 68 post(s)
 
 
	
	
		surely though the LEDs increase the amperage so minimally compared to the standard interior bulbs that it be ok?
	 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		Actually that boot one is quite good!  The hatch boot lights are alright but the estate one (where you have the big boot to put more shit in it!) is rubbish!  Its even worse in Sams as his boot light doesn't work lol, dunno if he's noticed yet though!   
		
	 
	
	
	
		
	Posts: 6,367 
	Threads: 87 
	Joined: Dec 2011
	
 Reputation: 
48 Location: South Yorks.
 Car Model/Spec: Rouge vallelunga 5 door Dturbo
     Thanks: 2Given 74 thank(s) in 70 post(s)
 
 
	
	
		nice work . .thinking of doing something very similar myself . .  
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
 
		
	 
	
	
	
		
	Posts: 13,881 
	Threads: 476 
	Joined: Dec 2011
	
 Reputation: 
81 Location: Ipswich
 Car Model/Spec: 306 Rallye
 Thanks: 4Given 104 thank(s) in 102 post(s)
 
 
	
	
		 (08-12-2012, 10:14 AM)Toms306 Wrote:  Actually that boot one is quite good!  The hatch boot lights are alright but the estate one (where you have the big boot to put more shit in it!) is rubbish!  Its even worse in Sams as his boot light doesn't work lol, dunno if he's noticed yet though!  
is that my top light? It works now that ive switched it to the right position tom! haha
	 
		
	 
	
	
	
		
	Posts: 2,612 
	Threads: 124 
	Joined: Apr 2012
	
 Reputation: 
26 Location: Some dimension
 Car Model/Spec: Megane DCiR
 Thanks: 2Given 0 thank(s) in 0 post(s)
 
 
	
	
		where you get these leds from? linky??
	 
		
	 
	
	
	
		
	Posts: 13,881 
	Threads: 476 
	Joined: Dec 2011
	
 Reputation: 
81 Location: Ipswich
 Car Model/Spec: 306 Rallye
 Thanks: 4Given 104 thank(s) in 102 post(s)
 
 
	
	
		theyre off ebay. http://www.ebay.co.uk/itm/330731438669?s...1439.l2649 
 
do you not have to put any resistors in line with these? D:
	
		
	 
	
	
	
		
	Posts: 6,482 
	Threads: 226 
	Joined: Dec 2011
	
 Reputation: 
24 Location: Cornwall
 Car Model/Spec: A3 TDi 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Very cool! I'd like puddle lights or something like that.. Im regularly parking in puddles and/or mud etc!
	 
Doesnt even own a 306.
 
		
	 
	
	
	
		
	Posts: 5,902 
	Threads: 142 
	Joined: Dec 2011
	
 Reputation: 
58 Location: Hastings, East Sussex
 Car Model/Spec: E46 BMW 320d
   Thanks: 17Given 28 thank(s) in 28 post(s)
 
 
	
		
		
		08-12-2012, 01:35 PM 
(This post was last modified: 08-12-2012, 01:38 PM by WiNgNuTz.)
	
	 
		I didnt use the mirror lights, i just got a set of 30cm LED strips, and attached them to the underside of the door: ![[Image: 2012-10-24190757.jpg]](http://i1101.photobucket.com/albums/g427/wingnutz2/2012-10-24190757.jpg)  ![[Image: 2012-10-24190735.jpg]](http://i1101.photobucket.com/albums/g427/wingnutz2/2012-10-24190735.jpg)  
Does the same job.    
 
Pictures dont do the light output any justice, when its really dark (ie. on my driveway) they light up a good couple of feet behind the door!
	
		
	 
	
	
	
		
	Posts: 3,524 
	Threads: 178 
	Joined: Jun 2012
	
 Reputation: 
28 Location: Odiham/Basingstoke/W-s-M
 Car Model/Spec: HDi! 
 Thanks: 0Given 1 thank(s) in 1 post(s)
 
 
	
	
		I've been thinking about wiring this in on the courtesy light circuit. Want puddle and feet area lighting up... 
 But if its gonna fudge the ECU I'm not such a fan!
 
		
	 
	
	
	
		
	Posts: 6,367 
	Threads: 87 
	Joined: Dec 2011
	
 Reputation: 
48 Location: South Yorks.
 Car Model/Spec: Rouge vallelunga 5 door Dturbo
     Thanks: 2Given 74 thank(s) in 70 post(s)
 
 
	
	
		ecu?.....pffffft....what ecu? XUD FTMFUW   
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
 
		
	 
	
	
	
		
	Posts: 105 
	Threads: 15 
	Joined: Mar 2012
	
 Reputation: 
0 Location: Suffolk/devon
 Car Model/Spec: Meridian HDI Estate 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		08-12-2012, 02:30 PM 
(This post was last modified: 08-12-2012, 02:39 PM by nauest.)
	
	 
		Interesting point about the bsi, I did think about that as I knew it was a digital circuit. I checked and the interior lights can take 4 or 5 watt T10 bulbs, and seeing as my current courtesy bulbs are 2x 4 watts and the LEDS use less than 1 watt, still within the max rating. Luckily for us filament bulbs are horrendously inefficient! btw, the LEDS in the tailgate that sam linked are much more powerful than the ones under the mirrors.
 I figure as long as you don't go over 10 watts combined lighting you are fine.
 
 Either way there must be some sort of protection, if one of the interior bulbs was shorted (quite possible) it would blow your ECU? I doubt even peugeot are that stupid!
 
		
	 
	
	
	
		
	Posts: 20,092 
	Threads: 591 
	Joined: Nov 2012
	
 Reputation: 
54 Location: Cotswolds
 Car Model/Spec: Stage 13 16v HDi
       Thanks: 22Given 68 thank(s) in 68 post(s)
 
 
	
		
		
		08-12-2012, 02:37 PM 
(This post was last modified: 08-12-2012, 02:40 PM by Piggy.)
	
	 
		this light fade thing I assumed was standard...my phase 1 does it?!...thats not got a ECU controlled bus crap 
 
PS...call that lighting???....
 ![[Image: DSC01763.jpg]](http://i92.photobucket.com/albums/l22/Piggy1987_2006/New%20int%20lights/DSC01763.jpg)  ![[Image: 7.jpg]](http://i92.photobucket.com/albums/l22/Piggy1987_2006/7.jpg)   
		
	 
	
	
	
		
	Posts: 105 
	Threads: 15 
	Joined: Mar 2012
	
 Reputation: 
0 Location: Suffolk/devon
 Car Model/Spec: Meridian HDI Estate 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		08-12-2012, 02:41 PM 
(This post was last modified: 08-12-2012, 02:43 PM by nauest.)
	
	 
		So the even non ECUed cars have the faders? I might check to see how they are all wired up, might be an independent Bsi for that kind of stuff. I just think the ECU is too important to be attached to a bus unit that is connected to un essential kit like locking and lights, but then this is peugeot we are talking about...
	 
		
	 
	
	
	
		
	Posts: 4,883 
	Threads: 198 
	Joined: Jan 2012
	
 Reputation: 
135 Location: Not near you
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		My phase 2 XUD has faders too, again no ECU
	 
		
	 
	
	
	
		
	Posts: 105 
	Threads: 15 
	Joined: Mar 2012
	
 Reputation: 
0 Location: Suffolk/devon
 Car Model/Spec: Meridian HDI Estate 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		haha, nice boot lights! Shame you cant actually put anything in there though   .
	
		
	 
	
	
	
		
	Posts: 20,092 
	Threads: 591 
	Joined: Nov 2012
	
 Reputation: 
54 Location: Cotswolds
 Car Model/Spec: Stage 13 16v HDi
       Thanks: 22Given 68 thank(s) in 68 post(s)
 
 
	
	
		 (08-12-2012, 02:46 PM)nauest Wrote:  haha, nice boot lights! Shame you cant actually put anything in there though  . 
ah but you can...hence the shelf built in...can get couple bags in easy.
 
shame its not a 306!!!
	 
		
	 
	
	
	
		
	Posts: 105 
	Threads: 15 
	Joined: Mar 2012
	
 Reputation: 
0 Location: Suffolk/devon
 Car Model/Spec: Meridian HDI Estate 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		08-12-2012, 02:51 PM 
(This post was last modified: 08-12-2012, 02:58 PM by nauest.)
	
	 
		Right, I tried this on a scrapped car just to see how it worked out, I shorted out the interior lighting circuit. I wanted to be sure it wasn't going to cause any issues. 
This is what happened:
 
The courtesy lights stopped working completely under any input, (unlock, door or switch) didn't effect any other systems. Was completely restored by unplugging battery, waiting, recoonecting. Apparently the BSI is much cleverer than expected! It must have some sort of short circuit/therm isolator. 
 
So don't worry people! Just keep it sensible.
 
 
Sweet, clever set up! What is it then?
 
 
These are what I have under the mirrors, I have put them into waterproof boxes. They are very small and 0.9 watts. 
http://www.ebay.co.uk/itm/251021935418?s...1439.l2649
		
	 
	
	
	
		
	Posts: 20,092 
	Threads: 591 
	Joined: Nov 2012
	
 Reputation: 
54 Location: Cotswolds
 Car Model/Spec: Stage 13 16v HDi
       Thanks: 22Given 68 thank(s) in 68 post(s)
 
 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
		
		
		08-12-2012, 05:01 PM 
(This post was last modified: 08-12-2012, 05:03 PM by Toms306.)
	
	 
		 (08-12-2012, 11:16 AM)SRowell Wrote:   (08-12-2012, 10:14 AM)Toms306 Wrote:  Actually that boot one is quite good!  The hatch boot lights are alright but the estate one (where you have the big boot to put more shit in it!) is rubbish!  Its even worse in Sams as his boot light doesn't work lol, dunno if he's noticed yet though!  is that my top light? It works now that ive switched it to the right position tom! haha
 
No, your actual boot light, its right at the back on the right hand side.  I didnt even realise it was there until I got the china lol.
 
Also, this can't have anything to do with the engine ECU!  Its gotta be built in to either a comfort module (if 306s have these?) or the central locking ECU I'd assume?
	 
		
	 
	
	
	
		
	Posts: 105 
	Threads: 15 
	Joined: Mar 2012
	
 Reputation: 
0 Location: Suffolk/devon
 Car Model/Spec: Meridian HDI Estate 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		08-12-2012, 05:03 PM 
(This post was last modified: 08-12-2012, 05:04 PM by nauest.)
	
	 
		 (08-12-2012, 03:10 PM)Piggy1987 Wrote:   (08-12-2012, 02:51 PM)nauest Wrote:  Sweet, clever set up! What is it then? my favourite car to date...should of never sold it...but I did...then the punk who bought it wrote it off and killed a biker in the process
  
Oh, that sucks real bad    Looked like a nice motor too.
	 
		
	 
	
	
	
		
	Posts: 13,881 
	Threads: 476 
	Joined: Dec 2011
	
 Reputation: 
81 Location: Ipswich
 Car Model/Spec: 306 Rallye
 Thanks: 4Given 104 thank(s) in 102 post(s)
 
 
	
	
		 (08-12-2012, 05:01 PM)Toms306 Wrote:   (08-12-2012, 11:16 AM)SRowell Wrote:   (08-12-2012, 10:14 AM)Toms306 Wrote:  Actually that boot one is quite good!  The hatch boot lights are alright but the estate one (where you have the big boot to put more shit in it!) is rubbish!  Its even worse in Sams as his boot light doesn't work lol, dunno if he's noticed yet though!  is that my top light? It works now that ive switched it to the right position tom! haha
 No, your actual boot light, its right at the back on the right hand side.  I didnt even realise it was there until I got the china lol.
 
 
 Also, this can't have anything to do with the engine ECU!  Its gotta be built in to either a comfort module (if 306s have these?) or the central locking ECU I'd assume?
 
I have one of those? musnt be working then haha
	 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		 (08-12-2012, 05:06 PM)SRowell Wrote:   (08-12-2012, 05:01 PM)Toms306 Wrote:   (08-12-2012, 11:16 AM)SRowell Wrote:  is that my top light? It works now that ive switched it to the right position tom! haha No, your actual boot light, its right at the back on the right hand side.  I didnt even realise it was there until I got the china lol.
 
 
 Also, this can't have anything to do with the engine ECU!  Its gotta be built in to either a comfort module (if 306s have these?) or the central locking ECU I'd assume?
 I have one of those? musnt be working then haha
 
It isn't working lol, never did!  I bet some 'tard put a bloody LED in that one too....    
		
	 
	
	
	
		
	Posts: 105 
	Threads: 15 
	Joined: Mar 2012
	
 Reputation: 
0 Location: Suffolk/devon
 Car Model/Spec: Meridian HDI Estate 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		08-12-2012, 05:09 PM 
(This post was last modified: 08-12-2012, 05:12 PM by nauest.)
	
	 
		 (08-12-2012, 05:07 PM)Toms306 Wrote:   (08-12-2012, 05:06 PM)SRowell Wrote:   (08-12-2012, 05:01 PM)Toms306 Wrote:  No, your actual boot light, its right at the back on the right hand side.  I didnt even realise it was there until I got the china lol.
 
 Also, this can't have anything to do with the engine ECU!  Its gotta be built in to either a comfort module (if 306s have these?) or the central locking ECU I'd assume?
 I have one of those? musnt be working then haha
 It isn't working lol, never did!  I bet some 'tard put a bloody LED in that one too....
  
Surprised it wasn't Sam himself, he loves his cheapy LEDs, the ones he gave me for my rear plate lasted about 3 weeks   . New ones seem much better quality, Im still yet to figure out Why LEDs don't ever seem to last as long as they should....
 
  (08-12-2012, 12:32 PM)SRowell Wrote:  theyre off ebay. 
 http://www.ebay.co.uk/itm/330731438669?s...1439.l2649
 
 do you not have to put any resistors in line with these? D:
 
No They are designed for 12v the LED chips have SM Resistors built in.
	 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		 (08-12-2012, 05:09 PM)nauest Wrote:   (08-12-2012, 05:07 PM)Toms306 Wrote:   (08-12-2012, 05:06 PM)SRowell Wrote:  I have one of those? musnt be working then haha It isn't working lol, never did!  I bet some 'tard put a bloody LED in that one too....
  Surprised it wasn't Sam himself, he loves his cheapy LEDs, the ones he gave me for my rear plate lasted about 3 weeks
  . New ones seem much better quality, Im still yet to figure out Why LEDs don't ever seem to last as long as they should.... 
Because cheap chinese LEDs are shit and I really dislike them!     When I got Sams estate it was full of the bloody things!  Both courtesy lights were blue and the dash was half working with a few really bright spots...of course the rest of them didn't work at all....     I replaced them all with real bulbs that actually work instead haha!
	 
		
	 
	
	
	
		
	Posts: 105 
	Threads: 15 
	Joined: Mar 2012
	
 Reputation: 
0 Location: Suffolk/devon
 Car Model/Spec: Meridian HDI Estate 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		 (08-12-2012, 05:14 PM)Toms306 Wrote:   (08-12-2012, 05:09 PM)nauest Wrote:   (08-12-2012, 05:07 PM)Toms306 Wrote:  It isn't working lol, never did!  I bet some 'tard put a bloody LED in that one too....  Surprised it wasn't Sam himself, he loves his cheapy LEDs, the ones he gave me for my rear plate lasted about 3 weeks
  . New ones seem much better quality, Im still yet to figure out Why LEDs don't ever seem to last as long as they should.... Because cheap chinese LEDs are shit and I really dislike them!
  When I got Sams estate it was full of the bloody things!  Both courtesy lights were blue and the dash was half working with a few really bright spots...of course the rest of them didn't work at all....  I replaced them all with real bulbs that actually work instead haha! 
Haha, yuh that sounds about right! I only use LEDs where there is no alternative, his LED sidelights always made me lol, looks like a Council estate at christmas.
	 
		
	 
	
	
	
		
	Posts: 13,881 
	Threads: 476 
	Joined: Dec 2011
	
 Reputation: 
81 Location: Ipswich
 Car Model/Spec: 306 Rallye
 Thanks: 4Given 104 thank(s) in 102 post(s)
 
 
	
	
		My LED side lights are amazing Ill have you know!   
		
	 
	
	
	
		
	Posts: 6,482 
	Threads: 226 
	Joined: Dec 2011
	
 Reputation: 
24 Location: Cornwall
 Car Model/Spec: A3 TDi 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Can we have some more pictures of the puddle lights please?    Preferably in the day time i want to do something like that myself just keen to see how you've done it   
Doesnt even own a 306.
 
		
	 |