Posts: 302
Threads: 27
Joined: Mar 2012
Reputation:
0
Location: bristol
Car Model/Spec: ph3 hdi meridian
If im correct i need an uprated clutch to cope with a stage 2
Tune.
Had tax rebate so ive ordered fmic and bmc cda filter
i have straight through and disabled egr. Once fitted i will
have stage 2 map.
Can someone recommend a performance clitch
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Helix and Sachs both come highly rated, i understand Sachs do an uprated one for the berlingo that, so far, seems to hold the torque just fine.
Posts: 1,804
Threads: 129
Joined: Mar 2012
Reputation:
11
CG 306 XUD Paddle clutch, will fit a HDI with a few bits being swapped over. I'm running one on my car and it's doing the job lovely and only cost £220
Stage 2 XUD Sedan
Posts: 5,024
Threads: 82
Joined: Dec 2011
Reputation:
27
Location: North Somerset
Car Model/Spec: E92 335i, GTi6, HDi S2
Poodle, whats the price for the berlingo one do you know? I've heard a lot of forum talk about it but never any prices?
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Not much different to the 306 afaik. If you're going to go CG, be wary of buying the ones made for the HDi, there's been a lot of bad experiences with the quality of their products.
Posts: 126
Threads: 11
Joined: Dec 2011
Reputation:
0
Location: Cambridgeshire
Car Model/Spec: xsara Hdi coupe
Would'nt of botherd with the cda, spend more money on a good clutch and dont buy anything off ebay!
Posts: 5,024
Threads: 82
Joined: Dec 2011
Reputation:
27
Location: North Somerset
Car Model/Spec: E92 335i, GTi6, HDi S2
AFAIK that was only on the sprung paddle clutches mate as they go coil bound past 270 lb/ft and snap the springs!
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Indeed, it was more the quality/construction issues that worried me. Fitting the friction plate backwards is a pretty major fail, as was the friction material falling off the plates after 500 miles lol.
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
ive just been on the phone to helix and for a clutch to hold 270ft lb's of toque looking for nearly £400!! either there having my pants down or thats the price i should be looking at, think i will be going for limited toque to save a lot of money.... i was only looking to spend £200 is that an unreal figure?
Posts: 15,645
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Go for the Helix or Sachs IMO mate. Yes theyer alot but if you buy cheap youll buy twice.
CG are a bunch of cowboys that consider snapping springs normal wear and tear and the fact that a clutch overstrokes perfectly acceptable.
Also dont believe anyone who tells you that swapping to an XUD set up with a new Valeo will hold the power of a stage 2 cos it wont
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
What he said lol, good clutches are expensive unfortunately.