30-09-2014, 09:10 AM
(30-09-2014, 06:12 AM)Poodle Wrote:(29-09-2014, 09:04 AM)306clot Wrote: the issue im having is i fitted the cable and the bite was in a nice place right neer the floor but now after driving the car a bit the bite has moved right up to where you only just need to touch the peddal
i was aware that the cables only adjust one way is this wrong?
jake
Ah i see, my mistake. Could do with finding out why it's set itself up there first then, is there full movement on the clutch arm, nothing fouling the self-adjuster, etc?
no there's nothing to stop the cable operating properly, the only thing that i can amuse has played it up is running a higher sprung pressure plate, i have bitten the bullet now and bought a 309 1.8 d cable as its got the same be3 gearbox connectors manual adjust and plastic pedal clip, all i will need to change is the cabin gromit on the 309 cable and take the one from my 306 cable, hope that works out well
jake