05-07-2014, 03:18 PM
Boost is pretty much sorted now, I have a 4 bar map sensor and we have been out mapping this morning, now holds more or less 30psi
Because it of how quick it builds boost we couldn't stop it spiking in 1st and 2nd without being laggy in the other gears, so just have to be carefull with first and second.
Done a quick test in 4th, floored it at 1800rpm and had 30 psi by about 2800rpm.
It's still a bit smokey but what tuned diesel isn't
Just have an issue with one pipe that keeps popping, it was fine for a few hours, but now it's popped once it keeps popping, the silicone joiner seems softer to the others so gonna order up a new silicone and see if that cures it, if not I shall speak to a mate about welding a bigger bead onto the pipe.
Because it of how quick it builds boost we couldn't stop it spiking in 1st and 2nd without being laggy in the other gears, so just have to be carefull with first and second.
Done a quick test in 4th, floored it at 1800rpm and had 30 psi by about 2800rpm.
It's still a bit smokey but what tuned diesel isn't
Just have an issue with one pipe that keeps popping, it was fine for a few hours, but now it's popped once it keeps popping, the silicone joiner seems softer to the others so gonna order up a new silicone and see if that cures it, if not I shall speak to a mate about welding a bigger bead onto the pipe.