Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
306 hubs on 205
#12
(04-09-2013, 02:29 PM)Bender Wrote: The 1.9 205's can use the 16mm ball joint hole from the 306 gti6 fine, yes it will give you about +0.5 positive camber give or take a bit.

I have a spare one if you need it to keep you going on for a while ?

Which side do you need ?

Got it sorted now used a gti hub and put my original ->insert name of part here that has got the threaded holes for the wheel bolts and splines on the inside for the driveshalft<- with a new bearing


(04-09-2013, 03:06 PM)Piggy Wrote:
(04-09-2013, 11:46 AM)Daniel306 Wrote: When i changed from the xud to Hdi box the inner drive shalft cups need changing as the splines are too long and caused it to leak

the boxes are basically identical pal. just the final drive and clutch arms that are different

Iv seen a few members on here have the same problem when converting to hdi box, the part of the shalft that the seal run's on can be different and will weep oil out
Reply
Thanks given by:


Messages In This Thread
306 hubs on 205 - by Daniel306 - 04-09-2013, 09:55 AM
RE: 306 hubs on 205 - by Piggy - 04-09-2013, 09:56 AM
Re: 306 hubs on 205 - by aggyj17 - 04-09-2013, 10:03 AM
RE: 306 hubs on 205 - by ginge191 - 04-09-2013, 10:04 AM
RE: 306 hubs on 205 - by Grant - 04-09-2013, 10:18 AM
RE: 306 hubs on 205 - by Piggy - 04-09-2013, 10:20 AM
RE: 306 hubs on 205 - by Daniel306 - 04-09-2013, 11:40 AM
RE: 306 hubs on 205 - by Piggy - 04-09-2013, 11:44 AM
RE: 306 hubs on 205 - by Daniel306 - 04-09-2013, 11:46 AM
RE: 306 hubs on 205 - by Piggy - 04-09-2013, 03:06 PM
RE: 306 hubs on 205 - by Dave - 04-09-2013, 09:26 PM
RE: 306 hubs on 205 - by Bender - 04-09-2013, 02:29 PM
RE: 306 hubs on 205 - by Daniel306 - 04-09-2013, 05:32 PM
RE: 306 hubs on 205 - by Ruan - 04-09-2013, 07:09 PM
RE: 306 hubs on 205 - by Piggy - 04-09-2013, 07:23 PM
RE: 306 hubs on 205 - by Daniel306 - 04-09-2013, 08:25 PM
RE: 306 hubs on 205 - by Bender - 04-09-2013, 09:04 PM
RE: 306 hubs on 205 - by Daniel306 - 04-09-2013, 09:59 PM
RE: 306 hubs on 205 - by Poodle - 05-09-2013, 11:38 AM
RE: 306 hubs on 205 - by Pugmarshall - 05-09-2013, 08:55 PM
RE: 306 hubs on 205 - by Poodle - 07-09-2013, 06:01 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)