04-10-2012, 06:03 PM
Yeah I was going to get another 406 shaft and just change the cv over, but the splines on the shaft are also damaged, and yeah the 406 driveshafts are too short!
![[Image: IMG_0312.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0312.jpg)
Came across another little problem today, although this was my fault, the thermostat housing is snapped in two where I done the strap up too tight holding the cover over the engine!
![[Image: IMG_0310.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0310.jpg)
Gave the brake servo a quick paint as it was looking a bit rusty!!
![[Image: IMG_0305.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0305.jpg)
![[Image: IMG_0306.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0306.jpg)
Gave the calipers a paint, just need to buy the brembo stickers now
![[Image: IMG_0309.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0309.jpg)
And also removed the rear beam
![[Image: IMG_0312.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0312.jpg)
Came across another little problem today, although this was my fault, the thermostat housing is snapped in two where I done the strap up too tight holding the cover over the engine!
![[Image: IMG_0310.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0310.jpg)
Gave the brake servo a quick paint as it was looking a bit rusty!!
![[Image: IMG_0305.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0305.jpg)
![[Image: IMG_0306.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0306.jpg)
Gave the calipers a paint, just need to buy the brembo stickers now
![[Image: IMG_0309.jpg]](http://i1174.photobucket.com/albums/r613/Jimmer021/IMG_0309.jpg)
And also removed the rear beam