Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
Has anyone done one of these? Using a xsara vts rack either phase one or two.
I know the phase two one is 2.6 lock to lock and the phase one is 2.2 lock to lock.
I am just interested in what difficulties people came across, I have looked on the 6 forum, and some people say its a straight swap and others say its not. depending on the phases of the 6.
My problem is I dont own a 6, my car in theory is a phase 1 car, but even when I bought it was a mix of phase 1 and 2 parts.
Any clues will be great.
Posts: 5,852
Threads: 92
Joined: Dec 2011
Reputation:
43
Location: Brizzle
Car Model/Spec: Tracterrrrrrrrr
Thanks: 2
Given 2 thank(s) in 2 post(s)
It really depends how the power steering pipes connect to the rack, some screw in and some are clamped in. Don't know if the 306/xsara varied its connections, but i remember doing a partner van once (so basically a 306) and this was the case
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come! ![[Image: connorsig.jpg]](http://www.306oc.co.uk/forum/images/uploads/connorsig.jpg)
Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
Yea I have seen some vary on the connection side of things. I want to get everything before we start as most places close early on a saturday.
Posts: 14,208
Threads: 448
Joined: Dec 2011
Reputation:
51
Location: isle of wight
Car Model/Spec: Pov. Spec White '6
Thanks: 17
Given 18 thank(s) in 18 post(s)
Why would you want too? Is there any benefit from it?
![[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]](http://i35.photobucket.com/albums/d196/mattbush/20A1806D-891D-40FB-BD52-AD519177A607-7340-0000058F46391753.jpg)
TEAM CONROD SHITTING RALLYE!
Posts: 4,605
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
Less turns lock to lock = win
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
Posts: 3,762
Threads: 9
Joined: Dec 2011
Reputation:
19
Location: Northwest (Cumbria)
Car Model/Spec: Ph2 DT with big Snail.....
Thanks: 0
Given 3 thank(s) in 1 post(s)
^^ this, quick steering racks are awesome!
Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
Have you or Darren done one mark? Or are you speaking from a experience based on other cars with them?
I drove a 6 and the have a terrible turning circle and so many turns lock to lock.
Posts: 14,208
Threads: 448
Joined: Dec 2011
Reputation:
51
Location: isle of wight
Car Model/Spec: Pov. Spec White '6
Thanks: 17
Given 18 thank(s) in 18 post(s)
Ahhh fair enough, tbh I didn't even think about turns to lock lol. Good idea though 
TEAM CONROD SHITTING RALLYE!
Posts: 8,019
Threads: 374
Joined: Dec 2011
Reputation:
38
Location: Isle of Wight
Car Model/Spec: GTI 6
Thanks: 8
Given 16 thank(s) in 14 post(s)
i get my arm exercise from steering a pug, reducing this would just give me bingo-wings :|
Posts: 5,852
Threads: 92
Joined: Dec 2011
Reputation:
43
Location: Brizzle
Car Model/Spec: Tracterrrrrrrrr
Thanks: 2
Given 2 thank(s) in 2 post(s)
I would say you need the rack first, then new lines if the connections are different
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
I have just bought a smaller steering wheel and thought it would go well with a quick rack
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
Given 29 thank(s) in 28 post(s)
it will make the steering heavier though.. potentially less control on bumpy back roads.
Welding and fabrication projects undertaken, contact me for more information.
Posts: 4,605
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
Jonny81191 Wrote:it will make the steering heavier though..
Man up? 
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
Posts: 3,984
Threads: 138
Joined: Dec 2011
Reputation:
72
Location: Milford, Surrey
Car Model/Spec: Mincebus
Thanks: 0
Given 0 thank(s) in 0 post(s)
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6- 6 - SOLD! 
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Posts: 4,605
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
Meh changing the rack dosnt take long at all tbh, just case of popping hoses off / tre's and dropping the subframe, and by sounds of it provided you just keep your exsisting gti6 ram, there wont be any hose / bumpstop issues...
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
Posts: 507
Threads: 13
Joined: Dec 2011
Reputation:
4
Location: I wish i knew.
Car Model/Spec: 306 Rallye // Saab 9-3 Aero.
Thanks: 2
Given 1 thank(s) in 1 post(s)
But Mark should be alrite as he should only have 5 gears .
Posts: 8,298
Threads: 289
Joined: Nov 2011
Reputation:
92
Location: London
Car Model/Spec: Phase 17 R26
Thanks: 0
Given 1 thank(s) in 1 post(s)
Pompey306mark Wrote:I drove a 6 and the have a terrible turning circle and so many turns lock to lock. This wouldn't change the turning circle of a 6 though...
Posts: 507
Threads: 13
Joined: Dec 2011
Reputation:
4
Location: I wish i knew.
Car Model/Spec: 306 Rallye // Saab 9-3 Aero.
Thanks: 2
Given 1 thank(s) in 1 post(s)
Make sure the handbrake works and you quite easily solve the lack of a right hand lock . And no as Scott said it wont change how much lock you achieve, just how quickly it gets there.
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
Given 29 thank(s) in 28 post(s)
darrenjlobb Wrote:Jonny81191 Wrote:it will make the steering heavier though..
Man up?
Yeah I know lol, all I was saying is that if you fit a smaller steering wheel, reducing the leverage you have, then fit a faster steering rack, you're less likely to be able to hang onto the wheel when hooning on back roads.
Obviously I don't know how much heavier the steering will be, it might not make that much difference...
Welding and fabrication projects undertaken, contact me for more information.
Posts: 4,605
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
Wont be bad at all tbh, I personally like a firm steering feel anyways. non pas ftw in terms of driving feel.
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
Posts: 1,766
Threads: 252
Joined: Dec 2011
Reputation:
7
Location: Sheffield/Leeds
Car Model/Spec: Xud sedan/Xud estate
Thanks: 2
Given 2 thank(s) in 2 post(s)
I did a swap from a 1.8 to a gti6 rack and it was a straight swap for mine. Shocking lock however on right handers i used to have to do a 3 point turn when crossing the middle of a duel carriageway where my grandma lives
TD04 11mm Sedan, now 2.1 vnt
Sedan Project http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
I know it wont change the turning circle, I was just commenting on how bad it was.
But it will change the number of turns lock to lock.
I have spoken to a few people with smaller steering wheels and they have said it made it more responsive and a bit easier.
Posts: 670
Threads: 80
Joined: Dec 2011
Reputation:
10
Location: the petrol station
Thanks: 0
Given 0 thank(s) in 0 post(s)
How noticeable would .4 really be?
![[Image: sigjpg.jpg]](http://i44.photobucket.com/albums/f32/cassandra--gemini/sigjpg.jpg)
Serious.
Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
Seems most of the 6 members who have done it have found it good and noticable.
Posts: 507
Threads: 13
Joined: Dec 2011
Reputation:
4
Location: I wish i knew.
Car Model/Spec: 306 Rallye // Saab 9-3 Aero.
Thanks: 2
Given 1 thank(s) in 1 post(s)
Posts: 4,605
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
I can see it being a nice upgrade myself....
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
Posts: 4,605
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
You can get those steering columb gearbox things also, which gear up the input speed, to make for chronic short turn area, drifting win.
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
Posts: 507
Threads: 13
Joined: Dec 2011
Reputation:
4
Location: I wish i knew.
Car Model/Spec: 306 Rallye // Saab 9-3 Aero.
Thanks: 2
Given 1 thank(s) in 1 post(s)
O and for anybody fitting a 6 rack to a derv, change the bloody ram over to a Derv on because you dont have a 6 speed box so dont need the shortened right hand lock to stop the wheel hitting the gearbox.
Posts: 4,605
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
Isnt it just a bump stop on the steering ram anyway?
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
Posts: 507
Threads: 13
Joined: Dec 2011
Reputation:
4
Location: I wish i knew.
Car Model/Spec: 306 Rallye // Saab 9-3 Aero.
Thanks: 2
Given 1 thank(s) in 1 post(s)
Im not 100% sure mate have never had one off i will be honest! I just know that somthing in the ram stops it. And if you put a xsara rack on a 6 you swap the ram onto it!
I was talking to a guy that runs a 205 rally car and he said if he did it all again he would get a non-pas rack and buy the pinion from quaife and then install a column assisted power steering system as employed on a lot of modern cars!
|
![[Image: Atterz.jpg]](http://i683.photobucket.com/albums/vv195/Atterz11/Atterz.jpg)
