Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sam's low boost supercharged rallye
#1
Hi guys brought this last nite,had a Accord Type R before was more hassle that it was worth.spend bloody fortune on petrol and oil.Here my previous beast

[Image: sam_0729.jpg]
[Image: sam_0730.jpg]
Right this is how i got to complete standard but not for long tho..... :evil:



[Image: DSCF6971.jpg]
[Image: DSCF6974.jpg]
[Image: DSCF6982.jpg]
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#2
standard rallye?! impressive that! not even the slighest of lows!
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#3
VERY sexy rally you have there, im amazed at how many are poping up concidering there was only 100 ever made and approx 40 left at last count
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#4
First thing first what i planned to do: new suspension
disc s and pads all round
induction kit with cold air feed
stainless steel exhaust plus decat
bucket seat,dished steering wheel,lost unwanted wait.

Got my self some raceland coilovers(really did nt now what to thing of these but pretty good,hard as f#ck tho)

[Image: 008-1.jpg]

Found the beam's torsion bars were seized in so had to lower by notchs,ended up being abit lower that what i wanted(40mm all round)now was about 50mm,but soon to be rebuild as i stands after the lowering

Before : [Image: 024.jpg]
After : [Image: 004.jpg]

New disc's and pad god know it needed them
[Image: 014-1.jpg]

Painted calipers up
Before:[Image: 007.jpg]
After: [Image: 008.jpg]

Then where Pugfest 11,was awsome(now prepareing for 12) found this picture,ended up doin 7 runs!!
[Image: pugfest.jpg]

Viper induction fitted
[Image: rallye006.jpg]
cleaner manifold fitted
[Image: rallye004.jpg]
My pride The air feed,best bit so far 8-),also done the badge black and tow eye red
[Image: rallye001.jpg]
[Image: rallye007.jpg]
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#5
Looks good chap Smile any other plans?
[Image: fe6eddc8-1731-4100-a5fe-1edb853a88b6_zpseeacf928.jpg]
Reply
Thanks given by:
#6
decide it want to turn it into track slag/daily drive after a track day in this beast
[Image: IMG_8459.jpg]
[Image: IMG_8457.jpg]

Right back to buisness
Magnex decat : [Image: 2012-04-03205500.jpg]
Ph2 rub primmed and ready to be colour coded: [Image: rallye008.jpg]

Track slag cyclones,ebay £50 whoop whoop
[Image: wheels001.jpg]
Paint time!!!:[Image: wheels002.jpg]
Sanded down:[Image: wheels004.jpg]
[Image: wheels006.jpg]
Primed:[Image: wheels007.jpg]
Done them in ford graphite grey here a pic on the car
[Image: DSCF7562.jpg]
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#7
lovin this, love rallyes! not hanging about either are ya lol

by any chance, have you fitted the decat yet? if not, would you be able to measure it for me? or the cat, either way, i just need to know the length so i can chop my cat up before i fit the gti manifold to my xsi.
cheers man!
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#8
samass Wrote:lovin this, love rallyes! not hanging about either are ya lol

by any chance, have you fitted the decat yet? if not, would you be able to measure it for me? or the cat, either way, i just need to know the length so i can chop my cat up before i fit the gti manifold to my xsi.
cheers man!

yeah i sold it as i brought a powerflow catback with a decat welded to it.
I'm actually further ahead(now in process of sorting out my pictures)

Right i got a powerflow cat back plus decat from good friend(jamma)think its 3 inch square(Second pic) not be bad as was a straight swap for my standard system.

Diaster strict my sister rear ended to at approx 20mph resulting in this :o
[Image: a014.jpg]
[Image: a013.jpg]

Did nt claim but getting fixed as we speak Big Grin
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#9
Good thing you didn't as they would write that off and we don't want that happening!
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#10
another picture of contrast over standard cyclones an graphite grey
[Image: DSCF7563.jpg]
Pictures of the wheels done(i now i painted tryes,they were died so did nt bother me )
[Image: 2012-02-12161348.jpg]
[Image: 2012-02-12161502.jpg]

decide to do a better cleaner manifold
before : [Image: 2012-02-12163013.jpg]
after [Image: 2012-04-16225542.jpg]
[Image: 2012-04-16225606.jpg]
Pretty good for half a spray can i had hanging around.

Got myself dished omp rep wheel,thinks its 350mm(suade nice and grippy)
Also omp boss think booth were £40 of ebay Smile
[Image: 2012-02-26111322.jpg]
[Image: 2012-02-26111346.jpg]

I have nt fitted it yet as need a different torq driver,maybe torq 50 ?
MMm another ebay deal been checking ebay daily for seats finally got these 1x cobra monaco 1 x cobra monaco s
[Image: 2012-04-03205234.jpg]
pretty good condition and near as damn it identical.
Omp base mounts for seats
[Image: 2012-04-24230952.jpg]
sliders for buckets go inbetween seat mount and seat
[Image: 2012-04-24231115.jpg]
3 Point sparco harnesses
[Image: 2012-04-26202959.jpg]

Project weigth loss!!
Rear seat gone
[Image: 2012-04-27091156.jpg]
Cleaned up boot

[Image: 2012-04-27093523.jpg]

about 15kg loss they maybe more
[Image: 2012-04-27091210.jpg]
removed centre console an ashtray,and lots of dirt.
Also fitted a Ph3 gear knob
[Image: 2012-05-01201053.jpg]

Lol got rid of the graphite wheels and got some in gloss black.so ill have toyo t1r for track Smile and p6000 for road Sad
[Image: 2012-04-29204352.jpg]

Seat/harnesses are in the omp would line up so through fuk it and brought all in one seat mounts/sliders from demon tweaks
[Image: 2012-05-03141827.jpg]
[Image: 2012-05-03135330.jpg]
[IMG]http://i305.photobucket.com/albums/nn232/7057sam/2012-05-03135244.jpg[/IMG
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#11
Few pictures after a well deserved clean
[Image: 2012-05-03164354.jpg]
[Image: 2012-05-03164415.jpg]
[Image: 2012-05-03164434.jpg]
[Image: 2012-05-03164454.jpg]
[Image: 2012-05-03164600.jpg]
[Image: 2012-05-03164701.jpg]
[Image: 2012-05-03164434-1.jpg]
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#12
Also got some ph3 lights as seen in picture above.
started stripping some more weight off.got rid of rear quarters and selt belts,plastic round the boot and round the wiper.will also be dewipering asap.rekon its aleast 10 kg safed there.
[Image: 2012-05-11152120.jpg]
[Image: 2012-05-11152135.jpg]
Result of a hour or so stripping out Smile
[Image: 2012-05-11152101.jpg]
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#13
Love the look of this, always preferred the black rallye to the Cherry Rallye which i have.

You planning on fitting a cage at all?
[Image: 306oc_zpsf2d249a4.jpg]
Reply
Thanks given by:
#14
Racelands on a Rallye Sad
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#15
Fozzy Wrote:Love the look of this, always preferred the black rallye to the Cherry Rallye which i have.

You planning on fitting a cage at all?


Yeah hopefully.fixed dent now,and just finished rebuilding beam and new rear mounts.
Also got to do cultch before pugfest.Hopefully get some track time in Tongue
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#16
Connor Wrote:Racelands on a Rallye Sad

I now :roll:,but at that point money was tight and i have been running on f*cked beam an beam mounts so see after rebuild what its looking like. my last 6 had koni adjustable on,which were very nice maybe go back to them.I want to go back to shocks i like a little bit of rebound.
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#17
kind of a shame to see a Rallye being taken apart but ah well. Also p6000's :?
[Image: sigjpg.jpg]
Serious.
Reply
Thanks given by:
#18
lewisdmz Wrote:kind of a shame to see a Rallye being taken apart but ah well. Also p6000's :?
OH well could change it back it hour or so,lol i love my toyo t1r's so for the time being got to put up wid the p6000 Sad
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#19
Lovely car, liking what you've done so far too!
Reply
Thanks given by:
#20
stephenraymond606 Wrote:Lovely car, liking what you've done so far too!


Thanks mate ,lots more to come,getting c Smile ar back sunday Smile
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#21
Any plans for the engine chap? I do like the rallye sits really well Smile
[Image: fe6eddc8-1731-4100-a5fe-1edb853a88b6_zpseeacf928.jpg]
Reply
Thanks given by:
#22
sam Wrote:Any plans for the engine chap? I do like the rallye sits really well Smile

Maybewas thinking along the lines throttle bodies or PT81 cam
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#23
Sounds good pal, would go like a tramp on chips if you do Smile plus can't beat the sound of bodies!
[Image: fe6eddc8-1731-4100-a5fe-1edb853a88b6_zpseeacf928.jpg]
Reply
Thanks given by:
#24
sam Wrote:Sounds good pal, would go like a tramp on chips if you do Smile plus can't beat the sound of bodies!

Yeah sounds is insane.Still sounds sick normal tho,doing the exhaust next weekend.Goin to get small silencer,so get it poping abit more
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#25
Update: Got car back from carls today,very excited Big Grin

Before :
[Image: a014.jpg]
[Image: a013.jpg]

After:
[Image: SAM_1622.jpg]

Very happy,bit of a rubbish picture tho.

Secondly
Omp wheel and boss finded,taking abit of getting used to.
[Image: SAM_1618.jpg]

Also boot got resprayed
[Image: SAM_1623-1.jpg]

Beam got rebuild an new beam mounts aswell,so running about 40mm,also got the rub stripes colour coded

[Image: SAM_1616.jpg]
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#26
Just FYI... if you have an accident with those harnesses like that, they will snap your spine in 2.

Stay safe, you really need a harness bar or a cage.

JP
JP
Reply
Thanks given by:
#27
jammapic Wrote:they will snap your spine in 2.

Substantiate this.
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Reply
Thanks given by:
#28
Ed Doe Wrote:
jammapic Wrote:they will snap your spine in 2.

Substantiate this.

Look at the angle they are bolted to the floor!! If you have an accident they will force your body straight down and snap your spine...
JP
Reply
Thanks given by:
#29
Interesting read, looks like your doing some decent bits to it!
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#30
jammapic Wrote:Look at the angle they are bolted to the floor!! If you have an accident they will force your body straight down and snap your spine...

Meh, I would suggest unless you're really tall, the amount you'd get pushed down would be negligble, and in any case if your momentum is forwards you'd move easily without getting 'damaged' too much...?
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Supercharged 306 Rallye Gunge 18 7,820 16-12-2011, 03:27 PM
Last Post: Gunge

Forum Jump:


Users browsing this thread: 1 Guest(s)