Breaking Black 3dr HDI Dturbo

[rocker8742]

hi yes i do need a cowl. i can't pm don't know why, so i will leave it hear

Hi mate, I have got a steering cowl but looks like someone's wrecked it in the past, snapped mounting points and holes drilled through top to bottom





Sent from my iPhone using Tapatalk

[tim 306td]

Got the spoiler today thanks bud

[Turbo7379]

Do you have a bottom radiator hose for sale? Mine is the type that pushes into the rad & is held in with a wire clip, there is a smaller hose that attaches to the header tank with a similar fitting & the other end of the large hose attaches to the engine block with a jubilee clip.

[Magenta Sunset]

Bump Coilies now sold, magenta I haven't had chance to get the bar off yet, is it urgent?


Sent from my iPhone using Tapatalk

no, not urgent, will be a spring summer job. repaint & swap over.

[Dangti6]

Do you have a bottom radiator hose for sale? Mine is the type that pushes into the rad & is held in with a wire clip, there is a smaller hose that attaches to the header tank with a similar fitting & the other end of the large hose attaches to the engine block with a jubilee clip.

Buy a new one of those rather than second hand if I were you. Still available from Peugeot for around £20/£25. Alternatively you can buy the O-ring separately if that is seeping - but the metal does corrode so for piece of mind I'd just buy the hose which has a new O-ring attached.

[rocker8742]

Do you have a bottom radiator hose for sale? Mine is the type that pushes into the rad & is held in with a wire clip, there is a smaller hose that attaches to the header tank with a similar fitting & the other end of the large hose attaches to the engine block with a jubilee clip.

Hi mate I don't have that hose unfortunately but as Dan says probably best off buying a new one as they are prone to corrosion


Sent from my iPhone using Tapatalk

---

Bump Coilies now sold, magenta I haven't had chance to get the bar off yet, is it urgent?


Sent from my iPhone using Tapatalk

no, not urgent, will be a spring summer job. repaint & swap over.

Hi bud sorry but I didn't manage to get that off before the car went as i had to get it gone very quick as needed the space all of a sudden



Sent from my iPhone using Tapatalk

---

I've still got the engine complete with loom and brackets etc, subframe, exhaust, dials and door strips from this if anyone is interested


Sent from my iPhone using Tapatalk

[Magenta Sunset]

Do you have a bottom radiator hose for sale? Mine is the type that pushes into the rad & is held in with a wire clip, there is a smaller hose that attaches to the header tank with a similar fitting & the other end of the large hose attaches to the engine block with a jubilee clip.

Hi mate I don't have that hose unfortunately but as Dan says probably best off buying a new one as they are prone to corrosion


Sent from my iPhone using Tapatalk

---

Bump Coilies now sold, magenta I haven't had chance to get the bar off yet, is it urgent?


Sent from my iPhone using Tapatalk

no, not urgent, will be a spring summer job. repaint & swap over.

Hi bud sorry but I didn't manage to get that off before the car went as i had to get it gone very quick as needed the space all of a sudden



Sent from my iPhone using Tapatalk

---

I've still got the engine complete with loom and brackets etc, subframe, exhaust, dials and door strips from this if anyone is interested


Sent from my iPhone using Tapatalk

not to worry. i'll plan-b.

[Turbo7379]

Do you have a bottom radiator hose for sale? Mine is the type that pushes into the rad & is held in with a wire clip, there is a smaller hose that attaches to the header tank with a similar fitting & the other end of the large hose attaches to the engine block with a jubilee clip.

Buy a new one of those rather than second hand if I were you. Still available from Peugeot for around £20/£25. Alternatively you can buy the O-ring separately if that is seeping - but the metal does corrode so for piece of mind I'd just buy the hose which has a new O-ring attached.

The metal end of my hose has rotted so is useless. I thought they were a crazy price - £40-£50, hence I'm looking for a 2nd hand one. Are you sure about that price, they are a whole lot more on ebay?

[Dangti6]

Current price £31.45 with the VAT. I bought one about 6 months ago and I am sure it was closer to £25 but then the price does fluctuate. NB. there is another similar type that is a few quid more (1351Z3). The £31.45 one will do you. Part no 1351ZV

Be thankful you don't have the earlier type which is no longer available - which is possibly what you are seeing on eBay at an inflated price.

By all means buy a used one to save £15 but buying new means it will probably outlast the car. Depends if you are keeping the car I guess.

I still have my old one - can be for sale.

[Mac22]

What exhaust system is it mate? And how much?

[rocker8742]

Pic says a thousand words as they say, everything after the box is stainless


Sent from my iPhone using Tapatalk

[Mac22]

Pmd you mate

[Turbo7379]

Current price £31.45 with the VAT. I bought one about 6 months ago and I am sure it was closer to £25 but then the price does fluctuate. NB. there is another similar type that is a few quid more (1351Z3). The £31.45 one will do you. Part no 1351ZV

Be thankful you don't have the earlier type which is no longer available - which is possibly what you are seeing on eBay at an inflated price.

By all means buy a used one to save £15 but buying new means it will probably outlast the car. Depends if you are keeping the car I guess.

I still have my old one - can be for sale.

With my car being a HDI the hose has a tee on it with a smaller hose going to the header tank so a 1351ZV hose will be no good!
I tried the dealers today & the correct hose is a 1351ZQ and is priced at £48 inc vat!

Needless to say I didn't order one. I'm going to make up a brass adaptor on the lathe with one end fitting into the radiator with an o-ring same as the original hose. The other end will have a hose barb so it will take the old hose after I cut off the rusted end. I'll take some pics & start a post about it.

[rocker8742]

Pipe, engine, box are all still available


Sent from my iPhone using Tapatalk

[rocker8742]

£15 missing one small piece and a chip out of one of the bigger ones



£5



£10






Sent from my iPhone using Tapatalk

[Sambarker]

What's the condition of the drivers door? And do you have front door cards? Cheers


Sent from my iPhone using Tapatalk

[rocker8742]

Haven't got the door cards and the doors got a big crease where it's been pushed onto the wing


Sent from my iPad using Tapatalk