Tom's Sanitary towel

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tom's Sanitary towel
Kisstory FTMFW, was blasting that and singing along in the van at work today.
Reply
Thanks given by:
Tom get a DAB radio, kisstory has its very own station
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
Yeah, I listen to that on my phone via wifi when working on cars in the carpark lol. Been after a cheap Sony DAB & 6CD headunit for the Focus pretty much since buying it, they don't come up cheap ever though unfortunately. Sad
Reply
Thanks given by:
It does? I found Kiss Fresh, will have to look again in the van.
Reply
Thanks given by:
JackFm, mostly for the traffic updates.
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
(02-07-2016, 10:00 AM)bigcheez2k3 Wrote: It does? I found Kiss Fresh, will have to look again in the van.

Theres 3. Kiss, kiss fresh and Kisstory. Kisstory is alright but they tend to play the same stuff over and over far more than other stations so it gets a bit repetitive.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
So, back to the car... lol

Finally go this tyre off...

[Image: I15QLnJ.jpg]

...and new one on, thanks to Bash!

[Image: Fq6zi0s.jpg]

[Image: Y8Nw6NR.jpg]

No more 11psi every morning yay... Rolleyes

Also found many lumps of rubber inside so must've been run flat for a while, meaning it wasn't the pot hole I thought and must've been f*cked before I got it! That's what was causing the wheel bearing noise haha, fail. Tongue
Reply
Thanks given by:
(01-07-2016, 06:51 PM)Toms306 Wrote: Been listening to Kiss since it was Vibe...  Can't beat the old skool and anthems of Kisstory between 11-12 in the car!!  Friday and Saturday nights are good as well.  Afternoon is a bit crap though I admit.

But then I imagine you're a hardcore rock kinda guy lol.

kiss used to be vibe? vibe was the nuts!
Reply
Thanks given by:
(01-07-2016, 06:51 PM)Toms306 Wrote: Been listening to Kiss since it was Vibe...  Can't beat the old skool and anthems of Kisstory between 11-12 in the car!!  Friday and Saturday nights are good as well.  Afternoon is a bit crap though I admit.

But then I imagine you're a hardcore rock kinda guy lol.

Not really a hard rock fanboi TBH. 
I spent the majority of my teens/early twenties at underground techno parties in warehouses, barns, woods and the ridgeway. Ran some drum and bass events locally as well for a few years.
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
Well I didn't expect that...

What station do you listen to then?

(04-07-2016, 04:50 PM)Eeyore Wrote: kiss used to be vibe? vibe was the nuts!

Yep, used the same 106.4 waveband, changed in about 2006 iirc, Kiss never has been as good as Vibe tbh.
Reply
Thanks given by:
I generally have absolute on at work because i am old and its respectable.
In the van i have 87.5FM, Raw Radio. London based pirate station with all sorts of underground music.
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
(04-07-2016, 05:12 PM)Danny Wideboy Wrote: In the van i have 87.5FM, Raw Radio. London based pirate station with all sorts of underground music.

Some of which is badass
Reply
Thanks given by:
Yeah, agreed. Im quite amazed at how good the quality of reception is for pirate.
Used to D.J on 87.5 F.M "u.ks finest". Had a lot less coverage than Raw and got busted quite often. Luckilly for me they never found the studio, only the transmitters.

(sorry for more O.T crap Toms.)
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
Was it next to a scrap yard by any chanc? A Peugeot specialist?
Reply
Thanks given by:
Was over near reading yeah, at a farm with a few car places, there was a few 306s about now I think back. Name the town it was in/near, i can't remember it.
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
I know exactly where that is

How strange lol
Reply
Thanks given by:
lol Small world.

It was hardly discreet TBF   Rofl
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
Sounds like People Just Do Nothing on bbc3... lol

I don't mind off topic crap, that the majority of my posts anyway lol.
Reply
Thanks given by:
would that be Paragon Pug of Pangbourne?
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
No, I don't believe so. If it's the place I think Paul's talking about is the other side of Reading near Wokingham.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Reply
Thanks given by:
Yep. That.^
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
So, this month hopefully nothing will be spent on the Fiesta as I kinda overspent massively last month lol. Had the afternoon free so decided to give in a proper clean. It seems either the Poorboys wax isn't as effective at the bottom of the tub or maybe I put it on thinner knowing it was running low, either way it didn't last long, and the Simoniz quick detailer I bought cheap in Tesco is shit. It's alright for removing dust but doesn't add any gloss or rain protection like the better ones, so the SRP had come off as well...not good on a dark high miler lol, got fed up of seeing the scratches and swirls!

So did the following -

Wheel cleaner
Pressure wash (inc engine bay)
Single bucket, wash mitt, Merr shampoo wash
Hose rinse
Cheap shampoo for lube and clay mitt
Hose rinse
Drying towel dry
SRP
Megs Gold Class liquid wax (been hanging around the cupboard ages, hadn't gone off)
Poorboys wheel sealant
Sainsburys Vinegar glass cleaner on windows
Meguiars Endurance Gel on tyres
Wipe door shuts
Vacuum inside
Final 'wipe' with a fluffy microfibre

End result - (PS - yes I did get a Fiesta, Focus and Ka in one shot, shame the Mondeo had left by then... lol )

[Image: AbBPEmk.jpg]

[Image: y2S1vNo.jpg]

[Image: gn007x1.jpg]

[Image: tcIPd5e.jpg]

[Image: uJbhP8t.jpg]

[Image: Px2Cbrt.jpg]

[Image: P5p3gpq.jpg]

[Image: M04RIMW.jpg]

[Image: VQkTg28.jpg]

[Image: KL9dwxO.jpg]


Annoyingly the new plates I bought, with the ebay tag line of 'withstands even close pressure washing' appear not to take a quick pass of the jetwash let alone getting close, why cant anywhere make plates any more!? Had the same set on the Focus 18 months before they starting failing from the jetwash. Dodgy

[Image: Asym0fe.jpg]

[Image: BPgeKiV.jpg]

Also, is there a free way to clean up the dirty tip? I don't have any sort of metal polish and don't want to buy anything just for that lol...

[Image: itL7eUa.jpg]
Reply
Thanks given by:
(05-07-2016, 05:43 PM)Toms306 Wrote: Also, is there a free way to clean up the dirty tip? I don't have any sort of metal polish and don't want to buy anything just for that lol...

What about tooth paste or tcut? Do you have any brasso?

I think someone ages ago said brown sauce works lol
Reply
Thanks given by:
Those are two part plates and they always do that.

I've had mine for nearly two years and they've been fine.

Europl8 who attend shows sell a pair for £25 which are single part plates so won't peel, see if you can find them online.
Reply
Thanks given by:
(05-07-2016, 06:40 PM)DeeTurbo Wrote:
(05-07-2016, 05:43 PM)Toms306 Wrote: Also, is there a free way to clean up the dirty tip? I don't have any sort of metal polish and don't want to buy anything just for that lol...

What about tooth paste or tcut? Do you have any brasso?

I think someone ages ago said brown sauce works lol

Don't have any brasso - didn't think anyone under the age of 70 had brass items? lol

Also don't have TCut or brown sauce... Do have some Meguiars ultimate compound though, didn't think to try that!

(05-07-2016, 07:12 PM)JJ0063 Wrote: Those are two part plates and they always do that.

I've had mine for nearly two years and they've been fine.

Europl8 who attend shows sell a pair for £25 which are single part plates so won't peel, see if you can find them online.

Ah I see, there are so many on ebay I must've chosen the wrong ones. Sad Unless it was the first ones that were supposed to withstand pressure washing...the ones I can't use to due not postcode or BS number on them. Rolleyes

Don't have the funds to buy any more so will have to put up with these and avoid them with the jetwash tbh. Europl8 do sell online, £25 with free postage atm.
Reply
Thanks given by:
I don't know if the pictures are flattering it slightly, but that really does look to have cleaned up well and looks exceptionally tidy!

Even allowing for the handful of issues that you've found, I still can't quite believe that someone swapped that for what looked from afar to be a distinctly mediocre GTi-6.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Reply
Thanks given by:
It is surprisingly tidy for the mileage, I will admit I don't do any front end close ups because that's suffered from stone chips, but got to remember it has done 116k in just 8 years so not surprising really. But apart from that, it's just very light scratches here and there which are easily detailed out. No door dings or scuffs at all!! Also no rust which is odd considering the badge lol! Itwasntme

I agree though, I don't understand why he would swap, still feel kinda guilty about it and hope the '6 is behaving! I passed him on the road this evening as it happens and he still looks happy enough driving it which is good!
Reply
Thanks given by:
So, little update today.

Have replaced the numberplate lamps as they kept falling out... In hindsight I could've got away with just using bigger screws, didn't realise how they were fixed until after buying. Oh well, they look cleaner anyway lol.

[Image: mJci4Vg.jpg]

[Image: yPnSWfB.jpg]

Missed the mileage milestone...gutted!

[Image: s4ht7hO.jpg]

But the best part, finally got that shock replaced! Realised the best way to remove a rounded bolt was to...let Bash do it with fire and a different 10mm extractor than mine...surprising how easy it is with the right tools and years of experience lol.

[Image: mXPkuv2.jpg]

Rear end feels better now (not something I can say often! lol )

However with the MOT due in September I asked him to give it a quick check while up on the ramp.

[Image: WI9R8fK.jpg]

Slight exhaust blow from a knackered clamp where the Milltek catback joins the cat an advisory.

Rusty solid brake pipe - been advised on last 2 MOTs but looks like a fail this time.

Flexi pipe at a stupid angle and rubbing the spring, looks like Stevie Wonder fitted it tbh, never seen so much bend on one!! Cheap I guess, and fairly easy to replace. The brakes are pretty awful anyway, knew they needed a fluid change so a hose or 2 isn't the end of the world.

But the worst one is the wheel bearing, quite embarrassed by it tbh. It's silent when spun, but there's loads of movement in it, I had wrongly assumed it was something else causing the knocking and movement but appears it's actually the wheel about to fall off, it's not even the one I thought was bearing was knackered on previously... Confused So that kinda needs sorting urgently, that's probably also the reason it wanders in a straight line at speed, I'd been blaming the stupid low profile and wide tyres... Dodgy
Reply
Thanks given by:
you forgot to mention the best bit.
"buy a Peugeot" Rofl
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
still looks like i have chicken legs lol. to be fair the wheel bearings not going to be that hard to do. if you got the hub off id get it pressed in and out in 20-30 mins
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)