heater box conversion

[bashbarnard]

there are two listed under my chassis on service box

post edited. i have both boxs how hard is it to put the valeo one in my ac model one

[Piggy]

AC and non AC.

Already told you that

[Toms306]

Lol, as above, Valeo for non-ac, Behr for AC.

[bashbarnard]

but both are listed under my chassis number!

[Toms306]

Servicebox isn't failsafe. This is one area where it really is that simple, not like trying to identify ball joints lol.

[bashbarnard]

Servicebox isn't failsafe.  This is one area where it really is that simple, not like trying to identify ball joints lol.

i just went outside and pulled down the cover under the glove box. behr

[bashbarnard]

changed first poist

[Toms306]

You'd need to pull the whole dash out to change the box where you can get away just pulling it forward a bit for the matrix, and change the heater dials and possibly loom on the box. Its a lot of hassle for no real gain that I can see?

[bashbarnard]

You'd need to pull the whole dash out to change the box where you can get away just pulling it forward a bit for the matrix, and change the heater dials and possibly loom on the box. Its a lot of hassle for no real gain that I can see?

I have a valeo box in with a free heyer matrix that was only done just before i got it

[Toms306]

Ah ok, makes sense. It would be more effort, but cheaper if you don't have to buy another matrix.

[welshpug]

you need to cut the hole in the scuttle panel, use the non ac control panel, non ac heater control wiring.

remove ac pipes and block hole in bulkhead.


i think all that work is worth far more than the difference between ac and non ac matrixes.

[Piggy]

Yeah I've already told bash all that welshy

[bashbarnard]

Hmm we will have to see. Id rather not cause myself extra work atm but im running short of funds untill payday. Ive got a few jobs on this week though that should help out. Ill see if the motorfactors can send up both valeo and behr so i can compare and see if the valeo one will fit as its £30 cheaper

[welshpug]

no it wont fit.

many have tried

[Eeyore]

Just get the right one. It's painful enough as it is