Why is it not flaming?

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Why is it not flaming?
#1
right so the Rallye has a decat (cut open and emptied cat) straight through to hollow box

My mates expect flames, I had a straight thorough before and it did it, so it worries me that it's not. Is it running to lean or something. I'm too tired to work it out haha
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#2
(08-03-2016, 11:00 PM)Matt Wrote: I'm too high to work it out haha

EFA

lol
Wishes for more power...
Reply
Thanks given by:
#3
maybe the magic dragon has lost its Puff?

https://www.check-mot.service.gov.uk/
GTI6 Info

Don’t drive faster than your guardian angel can fly.

Reply
Thanks given by:
#4
Maybe the car has decided not to f*ck itself over spitting flames...
Reply
Thanks given by:
#5
I'm never high Wink

So the fact it doesn't flame is normal? Someone mentioned to me the car could be running lean and that's why, which last night made perfect sense as I was so tired.

But now not so sure. If it's not meant to do it then I guess that's fine, I have a healthy engine after all Smile
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#6
So... Mine has a magnex decat and a full brand new piper stainless system. It doesn't pop yet alone flame.
Reply
Thanks given by:
#7
Try making spark plug gap bigger.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#8
(09-03-2016, 12:05 PM)silverzx Wrote: Try making spark plug gap bigger.

surefire way to kill an engine that, as the electrode falls off and pings around the chamber, stopping a spark and allowing a ton of fuel to hit a hot exhaust, you'll have lots of flame then Big Grin
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#9
(09-03-2016, 12:12 PM)welshpug Wrote:
(09-03-2016, 12:05 PM)silverzx Wrote: Try making spark plug gap bigger.

surefire way to kill an engine that, as the electrode falls off and pings around the chamber, stopping a spark and allowing a ton of fuel to hit a hot exhaust, you'll have lots of flame then Big Grin

He didn't say I wasn't allowed to kill the engine... He wanted flames... I gave the man flames...  Rofl
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#10
If you take it up to nearly the limiter in say 3rd, then dab the throttle on/off as the revs are dropping does it flame then?
[Image: Ty8kl7b.jpg]
Reply
Thanks given by:
#11
Just run a fuel line down to the exhaust... Wink
Reply
Thanks given by:
#12
can of petrol and a match, and no you cant fit a omex rev limiter to it!
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:
#13
just flick the ignition on the overrun..
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#14
(09-03-2016, 06:34 PM)Jonny81191 Wrote: just flick the ignition on the overrun..

you been taking lessons from the two stroke boys

https://www.check-mot.service.gov.uk/
GTI6 Info

Don’t drive faster than your guardian angel can fly.

Reply
Thanks given by:
#15
(09-03-2016, 06:53 PM)cully Wrote:
(09-03-2016, 06:34 PM)Jonny81191 Wrote: just flick the ignition on the overrun..

you been taking lessons from the two stroke boys

it works though lol
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#16
What size is it my magnex is 2.5 and makes like a gay fart and my mate 2.25 proper bangs.

Also check everywhere for airleaks a some one of them and bye bye to bang bang.
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#17
Haha I'm not after flames, just wondered why it didn't Smile
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#18
Can I try make it flame?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#19
Normally never flame/bang/fart unless provoked by cracking the throttle at around 4-6k RPM on the overrun. The management is calibrated well enough that it doesn't really do that, sometimes you'll get a very slight whiff of flame/black smoke when lifting off at high RPM, but usually not.

If it did before, it's likely it had an air leak on the inlet side causing it.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#20
Thinking about it, it was my old engine that would do it. The f*cked one haha
Think that did have an air leak somewhere aswell now I think about it.
I'm not fussed about having the flames etc just wondered why it was so different even though I am straight through
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#21
I'll bet if you crack the throttle between 6-4 on the overrun after nailing it, it'll bang and fart.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#22
It bangs it tits off now. There was a blow in the exhaust.

Now I need to try and stop in popping and burbling on overrun haha
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#23
(09-03-2016, 07:25 AM)Piggy Wrote:
(08-03-2016, 11:00 PM)Matt Wrote: I'm too high to work it out haha

EFA

lol

Lol
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)