Supercharger setup

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
For Sale: Supercharger setup
#1
Evening all,
MAY have something else in the pipeline for my car at the moment which will mean me selling the supercharger setup on my car which consists of:

Eaton M45 in mint condition with a refurbished snout and a 65mm pulley
Custom TIG'd outlet plate
XU alternator/engine mount modified to mount the charger to
Various pipework

To put this lot together, you would be looking at about £400-£500 plus the labour to make up the charger mount. With the smaller pulley, I'm making about 6.5psi which is giving 215hp on my engine BUT its capable of a lot more (few others about on 235-240ish)

This is literally ready to bolt on to the block so all you need to do is pipe up a FMIC and some form of mapping and you could run it happily.

Id be looking for about £300 delivered for the whole lot.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#2
Can also include some 440cc bosch "green giant" injectors for an extra 60 quid.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#3
You're a bastard.
I'll drop you a message
Reply
Thanks given by:
#4
Haha good man
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#5
bargain. its tempting and thats a great cheap way to make power... Could do it... but then i wouldnt have trumpets D:
Reply
Thanks given by:
#6
Bargain!! Glwts
Supercharged XUD Project - Dead

HDi Cabby Project Click
Reply
Thanks given by:
#7
(19-10-2014, 07:49 PM)SRowell Wrote: bargain. its tempting and thats a great cheap way to make power... Could do it... but then i wouldnt have trumpets D:


not really much point on that diddy little engine is there sam? lol
Given the choice between Niall and the sheep. I would choose the sheep!
/Toseland
Reply
Thanks given by:
#8
Selling due to poor bhp compared to an old 90s xud 12v engine kicking your ass?? Tongue
Wishes for more power...
Reply
Thanks given by:
#9
(19-10-2014, 09:33 PM)Piggy Wrote: Selling due to poor bhp compared to an old 90s xud 12v engine kicking your ass?? Tongue

Oh if only you knew Wink
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#10
Selling to buy more power to prove your balls are bigger now they been smashed by an old derv??

Money can buy more bhp everyday Wink
Wishes for more power...
Reply
Thanks given by:
#11
Again, if only if you knew!

Anyway, stop spamming my thread otherwise I'm banning your annoying pathetic little arse Wink
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#12
Well no one else is guna post on a for sale thread for a few bits that dont make much power Tongue
Wishes for more power...
Reply
Thanks given by:
#13
Oops my finger slipped....
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#14
lmao
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#15
lmao
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#16
"Like" Big Grin
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#17
£300!?

If I had a GTi6 I'd be over this like a rash.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#18
(20-10-2014, 07:47 AM)silverzx Wrote: £300!?

If I had a GTi6 I'd be over this like a rash.

Tbf its a great price
Wishes for more power...
Reply
Thanks given by:
#19
Probably should mention that you will also need aftermarket management with a custom map but even still, it's a very cheap price to beat a Lynx kit Wink
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#20
FFS..

pm'd
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#21
Good lad matt Smile
Wishes for more power...
Reply
Thanks given by:
#22
I'll sell my m45 setup for £280 then Wink
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
Video M45 Supercharger Jenkosowls 0 1,007 28-04-2015, 09:30 PM
Last Post: Jenkosowls
  Rotrex low boost supercharger setup including intercooler, oil tank, piping, ecu etc Paul_13 6 2,658 02-03-2015, 07:46 AM
Last Post: Paul_13
  306 GTI6 Complete Supercharger Fitting Kit Lwilliams 3 1,838 25-02-2015, 03:45 PM
Last Post: Lwilliams

Forum Jump:


Users browsing this thread: 1 Guest(s)