HDI brake pads. Help?

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HDI brake pads. Help?
#1
I need to replace the discs and pads on the lehdi, which has Lucas calipers. On ecp, they don't have Lucas pads; only Bosch, girling, and teves.

What do I need? Or where else shall I go?
Ta
Reply
Thanks given by:
#2
any pads will work as long as they are the correct size
00' 106 Indy - Moonstone - Sold
97' 106 XT 1.6 - Mayerling Green - Swapped
95' 306 P1 DT - Onyx - Scrapped
97' 306 P2 DT - Silver - Scrapped
97' 306 P2 DT - Onyx - SORN awaiting scrap
Reply
Thanks given by:
#3
(16-09-2013, 09:32 AM)adamm306 Wrote: any pads will work as long as they are the correct size

Doh

As said; i had the exact difficulty and had to take a pad in to check it over and get the right one.
The 266mm brakes have a couple of different shapes dependent on age of the vehicle.

I could try and find the ECP paperwork for the set i got.
I'm running 266mm lucas calipers also
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#4
Just go to CPA, there's one in CHi and there's one in Littlehampton. They're good and they're cheap, should be able to sort you out. .Even if it's wrong, you only have to nip down the road and change them.
Reply
Thanks given by:
#5
Ah bladdy hell! If its no hassle ginge, that would be helpful if they would be the same!

CPA?! Idk Vaughan knows, as will google, may do that then! Can't be arsed with ordering the wrong stuff Sad
Reply
Thanks given by:
#6
yeh i'll fish them out, then whip one out and check it against it
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#7
Car parts & accessories. The one I use is on the A27 at Oving opposite Beaver tool hire.
Reply
Thanks given by:
#8
Thaaaanks!

CPA have a different range to ecp haha even more choice

Other Information: Brake System Lucas

^ probably helpful if I read all the details Blush girling ones it is.
Reply
Thanks given by:
#9
Or upgrade to gti brakes while you're at it. They're loads better!
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#10
(16-09-2013, 10:05 AM)Jonny81191 Wrote: Or upgrade to gti brakes while you're at it. They're loads better!

Ah yes, the standard hdi power needs the braking of a gti :p
Reply
Thanks given by:
#11
You always need bigger brakes, everyone knows that!
Reply
Thanks given by:
#12
(16-09-2013, 10:16 AM)amiek Wrote:
(16-09-2013, 10:05 AM)Jonny81191 Wrote: Or upgrade to gti brakes while you're at it. They're loads better!

Ah yes, the standard hdi power needs the braking of a gti :p

No, it doesn't tbh. But it's nice to know you can out brake the idiot in the bmw who pulled out on you then anchored up, no?
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#13
Ive got lucas calipers on my hdi estate and the pads parkers provided are apec pad 970
Reply
Thanks given by:
#14
I skim read the thread, but no one has said the obvious: Lucas = Girling?
Reply
Thanks given by:
#15
(16-09-2013, 01:22 PM)tigerstyle Wrote: I skim read the thread, but no one has said the obvious: Lucas = Girling?

Indeed
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
[Image: wallye-gtd.JPG?raw=1]
HDi Owner for 200k/9 years
Reply
Thanks given by:
#16
Uh...

I just got Pagid discs and pads for my HDi with Lucas calipers and fitted them on Sunday.

This is because I looked at the more detailed specifications for the pads on the ECP site (well, I actually got them from carparts4less, but it's the same company). It actually said "Braking system: Lucas" in the additional info on the pads.

Not that hard!
[Image: MIRKxNP.jpg]
Reply
Thanks given by:
#17
No need to be rude about it mate
Reply
Thanks given by:
#18
...to not complicate things...dont all 306 266mm brakes have same pads regardless of make of caliper?
Wishes for more power...
Reply
Thanks given by:
#19
nope, the lucas ones have square ends, the bosch have rounded...

loads of bits on here:
http://brakeparts.co.uk/#page=parts&page...RBO+DIESEL
Project: Formula Peugeot
Reply
Thanks given by:
#20
(17-09-2013, 11:27 AM)Scott Wrote: No need to be rude about it mate

Didn't mean to come across as rude... Itwasntme
[Image: MIRKxNP.jpg]
Reply
Thanks given by:
#21
(17-09-2013, 03:44 PM)me-tm Wrote:
(17-09-2013, 11:27 AM)Scott Wrote: No need to be rude about it mate

Didn't mean to come across as rude... Itwasntme

I didnt think you was rude! lol! I assumed a post had been deleted that was rude!!

(17-09-2013, 01:01 PM)John1.4 Wrote: nope, the lucas ones have square ends, the bosch have rounded...

so just get a torch and have a quick peek at what ends the pads have and vwalah!!!
Wishes for more power...
Reply
Thanks given by:
#22
(17-09-2013, 11:01 AM)me-tm Wrote: Uh...

I just got Pagid discs and pads for my HDi with Lucas calipers and fitted them on Sunday.

This is because I looked at the more detailed specifications for the pads on the ECP site (well, I actually got them from carparts4less, but it's the same company). It actually said "Braking system: Lucas" in the additional info on the pads.

Not that hard!

(16-09-2013, 09:53 AM)amiek Wrote: Other Information: Brake System Lucas

^ probably helpful if I read all the details Blush girling ones it is.

Not that hard to read the thread and see that I eventually saw that myself! Speechless
Reply
Thanks given by:
#23
(17-09-2013, 03:55 PM)Piggy Wrote:
(17-09-2013, 01:01 PM)John1.4 Wrote: nope, the lucas ones have square ends, the bosch have rounded...

so just get a torch and have a quick peek at what ends the pads have and vwalah!!!

Or just for a big 'LUCAS' name on the caliper? Wink

You can usually make an educated guess anyway. X reg onwards across the range seem to be all Lucas. HDi's seem to still be Lucas before that. 1.8/2.0 Petrol seem to be Bosch before that. That's only for ph3 though, I haven't had older.
Reply
Thanks given by:
#24
(17-09-2013, 04:29 PM)amiek Wrote: Not that hard to read the thread and see that I eventually saw that myself! Speechless

Oh burn!! lmao
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#25
Derp!

I'm still not used to this forum adding in a line across the post if it's been edited. I just think it's a signature under there so don't bother reading it. lol
[Image: MIRKxNP.jpg]
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Best brake fluid and pads? JTaylor2005 19 4,684 19-08-2016, 08:09 PM
Last Post: Pgtips
  Back brake pads. Moonwalker 14 2,562 14-09-2015, 10:59 AM
Last Post: pug306driver
  Brake pads??? conorpierce 7 1,572 07-08-2015, 10:58 AM
Last Post: PartyJas

Forum Jump:


Users browsing this thread: 1 Guest(s)