KieranYeh's Polo GTI Project thread.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
KieranYeh's Polo GTI Project thread.
#1
Thought I'd make one, even with the knowledge it will become a thread of Nazi related banter !

I'll first introduce you to my last one, a Polo 1.4 8v 'stanced'

[Image: shopped-1.jpg]

Was about 68bhp IIRC, slow as hell, Low as f*ck, banded steelies that sat too far out the arch with an insulting amount of camber.

SO I got over that phaze and moved on !

When I got the GTI it had stickers everywhere, red badges and all kinds of halfords tat.

I cleaned it up to a more respectable level..

[Image: upldsze1.jpg]

Stayed like this for as long as it took for the coilovers to arrive..

[Image: 7cdf92d0d10911e1871d22000a1e8692_7.jpg]

I adjusted them down to the near lowest point, which was as you can see far too low. I cought on cats eyes on the road..

Eventually after some wheel debating I got some Ronal Turbos.

[Image: IMG_9603.jpg]

had 195 45 15 tyres on so they scrubbed in the arches being 7j and less than 40 offset

Ended up keeping these for a while before selling them for some banded steelies..

[Image: IMG_0688.jpg]

[Image: IMG_0700.jpg]

They lasted all of a week..

[Image: 264615_3484991409853_2068574811_n.jpg]

Got the turbos back on and painted them body colour

[Image: IMG_1096.jpg]

This time they had 175 50 15 tyres on to remove the scrubbing in the arches.

Then it was just a process of cleaning the car up through paintwork jobs, removing the bonnet bra:

[Image: VR4n3.jpg]

To where we are today:

[Image: VMPuLL1.jpg]

Now however, I love the look of the car, but I want it a bit more 'racecar'

It's quick enough for me (student) does 40mpg on a good day 1.6 16v 125bhp

Now all I want to do is make it better in the twisties as I plan to take it on the track a lot more in the near future.

Firstly I ordered a strut brace.. Didn't fit my model car

Now I'm thinking some lighter wheels with wider tyres..

One idea that I've been playing with for a while is the generic, overdone and I don't give a shit Team Dynamic Pro Race 1.2s


Photoshop:

[Image: MI3vejT.jpg]

The reason I'd be getting new wheels is A. lightness and B. Offset, just in case you don't know, the offset of the wheel dictates it's position within the arch, my Ronal Turbo wheels have a low offset number meaning they sit more in line with the arch, and therefore the tyres have to be more narrow to be able to get under without scrubbing. I need a narrower wheel, with a higher offset number to allow more room for tyre choice.

195 45 15 is the OEM tyre size and I want it back Doh
Reply
Thanks given by:
#2
Beuat.

One of the guys at work has one with an AGU 20VT in it, great little thing.

Speaking of which... I've got a spare, bare 20VT block that'd fit yours...
Matt-Rallye Wrote:Norledge for prime minister.
Poodle Wrote:I reckon Norledge has got it on the head mind.
Matt-Rallye Wrote:Norledge gets my vote tbh.
Reply
Thanks given by:
#3
(15-08-2013, 10:20 AM)Norledge Wrote: Beuat.

One of the guys at work has one with an AGU 20VT in it, great little thing.

Speaking of which... I've got a spare, bare 20VT block that'd fit yours...

Aha, mental.

A car this small and light doesn't need a 20VT Imo, just a tweak on the original engine would be fine..

I couldn't afford to buy / fit / insure or fuel that sort of thing, but thanks anyway aha Big Grin
Reply
Thanks given by:
#4
[Image: 019Edwards%20Of%20C.jpg]
Matt-Rallye Wrote:Norledge for prime minister.
Poodle Wrote:I reckon Norledge has got it on the head mind.
Matt-Rallye Wrote:Norledge gets my vote tbh.
Reply
Thanks given by:
#5

Nope, not the foggiest idea what this means

Saw something similar actually, a 5v Turbo at Edition 38.

[Image: kgPpfFd.jpg]

If I was to do anything like this, it would be working on the original block, I think the 1.6 is plenty, with some TBs it would be perfect. Any more power and I'd want it to be RWD. I don't like the idea of a straight line FWD car, I would rather spend the money on a RWD car that I could use all that power to it's full use.
Reply
Thanks given by:
#6
I think the TD pro race 5spokers would look better.

but then so would a 306.
Wishes for more power...
Reply
Thanks given by:
#7
(15-08-2013, 11:30 AM)Piggy Wrote: I think the TD pro race 5spokers would look better.

but then so would a 306.

Cheeky fucker.

but thanks Wink
Reply
Thanks given by:
#8
Hahaha nice piggy! Wink

Where are you based mate, think I saw your old one about the place..?

Ps fair play for putting a thread up, most couldnt stomach the banter. Smile
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#9
these me thinks...

[Image: Pro-Race-3-5-spoke.jpg]
Wishes for more power...
Reply
Thanks given by:
#10
Pro race 3s?

Looks like a Beaut car, loving the body coloured ronals
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#11
(15-08-2013, 11:58 AM)Piggy Wrote: these me thinks...

[Image: Pro-Race-3-5-spoke.jpg]

I did think this, got a guy that's willing to send me a pair for £200 posted.

Tempted.

(15-08-2013, 12:08 PM)Matt Wrote: Pro race 3s?

Looks like a Beaut car, loving the body coloured ronals

Cheers bro, I do too, just a shame about the restrictions they give me !

(15-08-2013, 11:49 AM)Poodle Wrote: Hahaha nice piggy! Wink

Where are you based mate, think I saw your old one about the place..?

Ps fair play for putting a thread up, most couldnt stomach the banter. Smile

I'm in Southampton mate, my old one is driving about somewhere !

Meh, I deal with it. At the end of the day I'm not typical scene so all walks of lifes appreciate my car for the car it is, not the badge it has.

You cant hate a good looking car !
Reply
Thanks given by:
#12
(15-08-2013, 12:28 PM)kieranyeh Wrote: You cant hate a good looking car !

Maybe that's why I hate 306's so much...
Matt-Rallye Wrote:Norledge for prime minister.
Poodle Wrote:I reckon Norledge has got it on the head mind.
Matt-Rallye Wrote:Norledge gets my vote tbh.
Reply
Thanks given by:
#13
Mmmm was only a lil while ago you was worried you'd get slated too much at forge Tongue
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
#14
a PAIR for TWO HUNDRED??

they less than that new!
Wishes for more power...
Reply
Thanks given by:
#15
Really like this, love 6n2 GTis. VERY nearly bought one a while back. Plans sound good, be a shame to lose the Ronals though!

(15-08-2013, 10:20 AM)Norledge Wrote: Speaking of which... I've got a spare, bare 20VT block that'd fit yours...

Is this an AGU...?
Reply
Thanks given by:
#16
(15-08-2013, 12:39 PM)Piggy Wrote: a PAIR for TWO HUNDRED??

they less than that new!

I can see you're going to be a right handful
Reply
Thanks given by:
#17
If the ronnal turbos come up for sale let me no Wink



Reply
Thanks given by:
#18
(15-08-2013, 12:42 PM)Chris_90 Wrote: If the ronnal turbos come up for sale let me no Wink

Aha.. £425 and they're yours
Reply
Thanks given by:
#19
(15-08-2013, 12:39 PM)Curt Wrote: Is this an AGU...?

Yarp...
Matt-Rallye Wrote:Norledge for prime minister.
Poodle Wrote:I reckon Norledge has got it on the head mind.
Matt-Rallye Wrote:Norledge gets my vote tbh.
Reply
Thanks given by:
#20
(15-08-2013, 12:42 PM)kieranyeh Wrote:
(15-08-2013, 12:39 PM)Piggy Wrote: a PAIR for TWO HUNDRED??

they less than that new!

I can see you're going to be a right handful

Huh Confused

I dont get it?! I just pointing out that a pair for £200 is excessive.
Wishes for more power...
Reply
Thanks given by:
#21
(15-08-2013, 02:04 PM)Piggy Wrote:
(15-08-2013, 12:42 PM)kieranyeh Wrote:
(15-08-2013, 12:39 PM)Piggy Wrote: a PAIR for TWO HUNDRED??

they less than that new!

I can see you're going to be a right handful

Huh Confused

I dont get it?! I just pointing out that a pair for £200 is excessive.

I meant all 4, accidentally said a pair, I thought you were taking the piss TMI
Reply
Thanks given by:
#22
Oh its you! Met you before with Steve in Easteigh iirc. Didn't realise, forgot you are called keiran, if that makes sense lol.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#23
(16-08-2013, 05:31 AM)Poodle Wrote: Oh its you! Met you before with Steve in Easteigh iirc. Didn't realise, forgot you are called keiran, if that makes sense lol.

Ah right, you're 'Silverlake guy' Wutup! Big Grin
Reply
Thanks given by:
#24
Hmm, I kinda like these shape Polo's......shame about the inside though, really dated and low specced - unless you've modded yours anyway. The wheels aren't my cuppa tea but overall it does look good.

I very nearly bought one last year...ended buying the 106 NAD instead lol.
Reply
Thanks given by:
#25
His is the 6n2, the one with the updated interior and one of the nicest I've seen on that age hatchback . like that but more gti'er
[Image: interiorbk0.jpg]
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
#26
Ah actually that is nice, very Golf'y...not the one I was thinking of then, can't keep up with all the XnX crap, whats wrong with having marks...or phases if you're French and awkward lol.
Reply
Thanks given by:
#27
Yeah mine's like that, execpt a bit more flashy and black, has red detailings too.

Best interior for the price range by far imo !
Reply
Thanks given by:
#28
(16-08-2013, 07:59 AM)kieranyeh Wrote: Ah right, you're 'Silverlake guy' Wutup! Big Grin

Hahaha yeah that's me, hey!

Looks good man, do like the interior on these tbf. So when we fitting these TBs?
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#29
Nice.. I like it!!
On the 306 waiting list.
Reply
Thanks given by:
#30
(16-08-2013, 09:22 PM)Poodle Wrote:
(16-08-2013, 07:59 AM)kieranyeh Wrote: Ah right, you're 'Silverlake guy' Wutup! Big Grin

Hahaha yeah that's me, hey!

Looks good man, do like the interior on these tbf. So when we fitting these TBs?

When I get my drift car Wink

(16-08-2013, 09:36 PM)Jake Wrote: Nice.. I like it!!

Cheeers bro !
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  should really start a project thread... toseland 20 5,278 23-11-2014, 08:47 PM
Last Post: Toms306
  GT2052S project thread number three 306Puggy 98 21,756 11-06-2014, 02:28 PM
Last Post: Chris_90
  So project thread started camoturd 23 4,264 13-04-2014, 11:25 AM
Last Post: camoturd

Forum Jump:


Users browsing this thread: 1 Guest(s)