Jake's Black PH1 DTuuuurbo.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Jake's Black PH1 DTuuuurbo.
#61
mark_airey Wrote:Milage the engine has done or mileage the clocks say its done? and if its pouring out blue smoke I would check the intake side of things after the turbo just in case its that blasting oil down the intake!

Well, its Kris' old car as you know, and he fitted an engine with apparently ~60k on it then never used it because he couldnt drive, so it shouldnt be over 80k at the most now, but the shell has done around 150k.
Reply
Thanks given by:
#62
Cars on 135k, engine is on under 80k, so yeah would be a shame if the engine needs replacing Sad
On the 306 waiting list.
Reply
Thanks given by:
#63
Wont be the rings, not to be causing blue anyway, ive ran xuds with stones going down the intake for years and its never got that bad, even with chronic bore scoring, blue smoke is near enough always breather / turbo related.... or worst case head gasket....

If its pressurzing the crap out of the coolant / spewing it everywhere, and you can confirm the water pump IS pumping water (idle from cold and see if water comes out the bleeds like normal) then itl be the head / head gasket.... more often than not its a cracked head rather than the gasket itsself.
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#64
Darren - When I met up with Jake his rad was totally empty, he poured in about 2 litres and after about 30 seconds it all started gushing out of the waterpump 'area', and thats with the engine off.
Reply
Thanks given by:
#65
Dan! Wrote:Darren - When I met up with Jake his rad was totally empty, he poured in about 2 litres and after about 30 seconds it all started gushing out of the waterpump 'area', and thats with the engine off.

The bottom rad hose runs past there.....check you've not blown a hole in it like I did when my HG had gone on the 1.4.......water all fell out as soon as it was put in....
Reply
Thanks given by:
#66
[Image: th_DSC_4560.jpg]

One feckered waterpump!!


Edit, thats a video btw, click on it Tongue
Reply
Thanks given by:
#67
Fookin hell, thats fooked, look at the state of the back of the motor, I thought Kris used to keep it immac?! And that pump cant have been changed in years!

At least you have found your problem tho!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#68
Cv book went a few weeks ago, hense the grease everyware around that area! We have just looked at the turbo and it has about 3mm of play in it so fingers crossed thats what is causing the oil / blue smoke.
Reply
Thanks given by:
#69
Whats wrong with that? lol
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#70
Its not ideal tbh lol
Reply
Thanks given by:
#71
VVT anyone? lol
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#72
[Image: 5284d8da-f91c-0fe9.jpg]:ninja:
On the 306 waiting list.
Reply
Thanks given by:
#73
Been to the scrappies then?
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#74
Td04 yo!
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#75
Isn't that the laggy one? :think:
Reply
Thanks given by:
#76
Looks tiny! My spare k14 looks bigger Tongue
Stage 2 XUD Sedan
Reply
Thanks given by:
#77
Well here's is next to the k14
[Image: 5284d8de-4ff6-3954.jpg]

Got the k14 off and tomorrows job is to get the TD04 on to the manifold,
On the 306 waiting list.
Reply
Thanks given by:
#78
you should do a bit of a guide on how to get a td04 on Big Grin
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#79
4WayDiablo Wrote:you should do a bit of a guide on how to get a td04 on Big Grin

No its a secret!

Come on phill its piss easy lol
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#80
Well, getting there... Oil line is made !

[Image: 519eaa03-79e8-342e.jpg]

Now to just bolt the bitch to the manifold somehow XD
On the 306 waiting list.
Reply
Thanks given by:
#81
Toxic-Jake Wrote:Well, getting there... Oil line is made !

[Image: 519eaa03-79e8-342e.jpg]

Now to just bolt the bitch to the manifold somehow XD
Who done it?

Sent from my HTC Wildfire using Tapatalk
[Image: sig-1.jpg]

106 Xud9 Conversion GtiD (2nd Engine Rebuild)
SOLD

Dan! Wrote:Want me to blow this one up for you aswel?
Reply
Thanks given by:
#82
Pirtek
Reply
Thanks given by:
#83
Toxic-Jake Wrote:Well here's is next to the k14
[Image: 5284d8de-4ff6-3954.jpg]

Got the k14 off and tomorrows job is to get the TD04 on to the manifold,

But why does it look so small?? :? K14 next to my TD04.............

[Image: IMG_0880.JPG]
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#84
Must be the photo, its a TD04L off a bug eye impreza, so it must be the right one lol
Reply
Thanks given by:
#85
Dan! Wrote:Must be the photo, its a TD04L off a bug eye impreza, so it must be the right one lol

Yeah I know that, it just looks so small in that photo lol
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#86
padge Wrote:
4WayDiablo Wrote:you should do a bit of a guide on how to get a td04 on Big Grin

No its a secret!

Come on phill its piss easy lol
im fairly sure i know most of the mlarkey to get one on
adapter plate on a t2 mani, split the turbo to get the outlet pointing the right way, custom some oil lines then bodge on a downpipe adapter, do something about the wastegate as it will foul on the bulkheadBig Grin, just biding my time Tongue
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#87
Now got a piece of 8mm steel plate in my possesion ninja Going to do some mocking up at break time.
Reply
Thanks given by:
#88
jake what are you doing with your k14? ninja
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
Reply
Thanks given by:
#89
declantg Wrote:jake what are you doing with your k14? ninja

Its fooked mate! Sad
Reply
Thanks given by:
#90
i realized as soon as i posted lol my bad
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)