FAO Ginge191 - pipes

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FAO Ginge191 - pipes
#31
I'll see if its long enough phill, the 406 pipe I've got keeps blowing off and hangs stupidly low.
[Image: sig.jpg]
Reply
Thanks given by:
#32
Ok np. Ill send you one of the other 2. Still sealed in their bubble wrap lol
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#33
Phil - a company can make it up for me with:

1 x 90deg silicone 57-51 reducer
1 x straight alloy coupler
1 x 90deg silicone 51mm bend

you reckon there would be enough room for this?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#34
4WayDiablo Wrote:
Chris Wrote:Phill, is that bend in the last pic a 90* and a 2.25"
If so how long are the legs on it and how much do you want for it?
[Image: IMG_20120129_151347.jpg]
17 cm of 2.25" completely straightness on either side of the 90

I have 3 of the 90's ginge only wants 2 ... 8quid poated to your door?

Might be the photo... but thats a funny looking 90 degrees...
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#35
i think its 92* ninja
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#36
ginge191 Wrote:Phil - a company can make it up for me with:

1 x 90deg silicone 57-51 reducer
1 x straight alloy coupler
1 x 90deg silicone 51mm bend

you reckon there would be enough room for this?


Phillip?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#37
ginge191 Wrote:
ginge191 Wrote:Phil - a company can make it up for me with:

1 x 90deg silicone 57-51 reducer
1 x straight alloy coupler
1 x 90deg silicone 51mm bend

you reckon there would be enough room for this?


Phillip?
didnt see that there lmao

my pipes are 57mm? am i missing something?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#38
im assuming that the 57-51mm is irrelevant which way it goes round??
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#39
true but why is there another 51mm 90 bend? surely that should be a 57mm no?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#40
Im assuming the joiner pipe is 51mm? i shall enquire
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#41
joiner pipe? so confused? so your going
51mm 90 / 51- 57mm 90
to make the u bend to send it gearboxwards?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#42
4WayDiablo Wrote:joiner pipe? so confused? so your going
51mm 90 / 51- 57mm 90
to make the u bend to send it gearboxwards?

yes, and a joiner pipe to join the two 90* together... as 90 + 90 = 180 :geek:

this is the only viable way to create a U bend from turbo at 51mm to piping at 57mm Smile
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#43
ginge191 Wrote:
4WayDiablo Wrote:joiner pipe? so confused? so your going
51mm 90 / 51- 57mm 90
to make the u bend to send it gearboxwards?

yes, and a joiner pipe to join the two 90* together... as 90 + 90 = 180 :geek:

this is the only viable way to create a U bend from turbo at 51mm to piping at 57mm Smile
A 51mm u bend then 51 - 57 adapter then straight pipe?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#44
oui!

turbo -> 51mm 90* -> joiner pipe -> 51mm - 57mm 90* -> straight pipe....
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#45
Or just get 1 x 180 bend 51mm then get a 51 - 57 adapter is what i was trying to say
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#46
4WayDiablo Wrote:Or just get 1 x 180 bend 51mm then get a 51 - 57 adapter is what i was trying to say

ohhhhhhhhhhhh i get you! that could make more sense i suppose, saves faffing around, id still need a joined pipe as i cant just pop two pieces of silicone together, right? unless you have some odd 51mm pipe?

edit: 180* 51mm -> joiner pipe -> 51mm - 57mm
http://www.ebay.co.uk/itm/Black-Silicon ... 1750wt_854

http://www.ebay.co.uk/itm/Alloy-hose-jo ... 1e603e356e

http://www.ebay.co.uk/itm/SILICONE-NOME ... 3368b73e06
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#47
They do solid pipe ones. Stainless 51 to 57. Then i have some 57 straight silicon perfect to join.

The third pic on the first post. The red pieces
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#48
http://www.ebay.co.uk/itm/51mm-57mm-ALL ... 4aa785c660

BOOM! i'll crack on and order now! Smile

OH and i may need a 90* silicone piece to get round the engine??
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#49
You said you would get that lol ive got stainless 90's we can cut down if you want...?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#50
4WayDiablo Wrote:You said you would get that lol ive got stainless 90's we can cut down if you want...?

yeh i'm just ordering now so im re-affirming to myself, you can keep that intact mate Smile

I'll buy the 51mm ubend, metal adapter and 90degree silicone - should be plenty full!
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)