Big 4 core copper radiator | 205 / 309 / 306

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
For Sale: Big 4 core copper radiator | 205 / 309 / 306
#1
Pretty sure this is a 205 / 309 radiator by the looks of the connectors 

Custom 4 core copper 

Came off jammapics 306, so will fit a 306 no probs

Had it with intention of fitting to zx, but would require me re-routing boost pipes because i run between rad and chassis leg, and has been sat since.

Having a clear out

£100 open to offers

Location is London, can bring to xmas meet 

Will get dimensions

[Image: IMG_4527_zpsyeoc6lv6.jpg]
Reply
Thanks given by:
#2
Want!! Ill see what i can scrap together.

Which means i need to sell stuff to afford this so clearly dont count on me.
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Reply
Thanks given by:
#3
65mm core !!

330mm height

800mm width
Reply
Thanks given by:
#4
Any idea how much it weighs? Looks like it uses a different lower pipe to a standard 306?
Reply
Thanks given by:
#5
(22-11-2015, 09:12 PM)DemonDriverDan Wrote: Any idea how much it weighs? Looks like it uses a different lower pipe to a standard 306?

Sorry for confusion - will physically fit a 306 no problem!

You would have to cut off plastic connector from bottom hose and use a jubilee instead.

Weight wise don't really know, it is deffo heavier than a standard rad though
Reply
Thanks given by:
#6
Ok, no worries then. I hate the bottom connector on the 306 rad but if it's heavier then it's no good for me Smile
Reply
Thanks given by:
#7
(23-11-2015, 07:21 PM)DemonDriverDan Wrote: Ok, no worries then. I hate the bottom connector on the 306 rad but if it's heavier then it's no good for me Smile

given the size of it be hard pushed for it to be any lighter than standard rad

thursday bump, can bring to xmas meet
Reply
Thanks given by:
#8
(23-11-2015, 07:21 PM)DemonDriverDan Wrote: Ok, no worries then. I hate the bottom connector on the 306 rad but if it's heavier then it's no good for me Smile

Yeah if you want a bigger rad with a bigger core, expect more weight! 

Tried looking at my setup? Its keeping my boosted derv cool but faitlapit or whatever his name is runs the same rad
Wishes for more power...
Reply
Thanks given by:
#9
If I'm going to swap it'll probably be for a 106 rad or an adapted 205. I need something that's easy and cheap to replace in the event it gets broken. Already lost 1 rad due to a stone making a hole in it and I think my current one has been hit as well!
Reply
Thanks given by:
#10
Where abouts in London are you?
Reply
Thanks given by:
#11
(01-12-2015, 05:10 PM)Pompey306mark Wrote: Where abouts in London are you?

Stratford, E15
Reply
Thanks given by:
#12
[quote='

Stratford bruv, E15
[/quote]



EFA.

Soz dood. I'm aware I am a twat.
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
#13
(01-12-2015, 06:39 PM)Danny Wideboy Wrote: [quote='

Stratford bruv, E15



EFA.

Soz dood. I'm aware I am a twat.
[/quote]

Heh, not far off tbh
Reply
Thanks given by:
#14
What's the condition of the fins on the other side ?

I'm always in london so collection wouldn't be an issue.

Can you do a better price than £100 ?
Cherry red 205 XUD VNT - Project thread here http://306oc.co.uk/forum/showthread.php?tid=25522
Reply
Thanks given by:
#15
(02-12-2015, 11:57 AM)andyyy Wrote: What's the condition of the fins on the other side ?

I'm always in london so collection wouldn't be an issue.

Can you do a better price than £100 ?

similar as pic, don't have any more to hand atm

welcome to make me a reasonable offer

cheers
Reply
Thanks given by:
#16
Might pop over next time i'm in town if that's alright with you? That way at least I can see it for what it is.
Cherry red 205 XUD VNT - Project thread here http://306oc.co.uk/forum/showthread.php?tid=25522
Reply
Thanks given by:
#17
I might be in the centre of London on Friday, working for TFI Friday.

I was there on Monday, but have not looked on here in a while Sad

I would be interested as its a easy swap at the moment with the build going on.
Reply
Thanks given by:
#18
back to the top!
Reply
Thanks given by:
#19
sold!
Reply
Thanks given by:
#20
Someone got a bargain... that cost me 3x that to have made all those years ago!!!

Stops an XUD overheating, full stop! Even after 30 mins of track abuse mine would stay perfectly cool with that on.

Makes me wish I still had it...
JP
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)