project number 2 twin turbo :-) how she looks now (-:

[pioneer DJ paddy]

Good progress Paddy hope it works out for you!

Thanks Paul can't wait to get all 4 weeks back on the ground ta see what its like lol :-) 

[pioneer DJ paddy]

So a small update again after alot l
of lookin around in my work managed to get sum fitments for the boost gages and bosch pump lol was hopping to get a lot more work done but felt shity with the flu and an ear infection lol just wasn't in the mood for work on the car lol but Monday another day so I will crack on nw I'm feeling better lol here is sum pics :-)  




[attachment=21070][attachment=21069][attachment=21068]

[pioneer DJ paddy]

Done a bit more work on the car this week lol got a diesel  cooler fitted and oil cooler also got standered fans back in wife alot of cutting and moding :-) intercooler nw in its final resting place have a video of its first start and sum photos of the oil cooler


http://m.youtube.com/watch?v=UnhACmtTupI

---

[attachment=21205][attachment=21204][attachment=21202][attachment=21201][attachment=21200][attachment=21199]

[Piggy]

Well done fella...be more like a fuel heater though as you want the fuel to heat up not cool down!
Beast of an intercooler that!
You excited?!

[bashbarnard]

Love the fact this is together. Bet you cant wait to get this on road. Glad you stuck at it with this project.

[pioneer DJ paddy]

Ye can't wait to get it back on the road lol needs mot first intercooler wasn't the handiest fitted lol turbos sound pretty cool lol how did u get that flutter sound wen u switch off u r car did it just start doing it wen turbo was fitted sound sweet :-)

---

Love the fact this is together. Bet you cant wait to get this on road. Glad you stuck at it with this project.

Thanks man :-) and it still cost me very little money to do it all lol having parts at hand is great lol

[7057sam]

Looks and sounds epic and credit to you

Ah yeah the intercooler rather large

[pioneer DJ paddy]

Looks and sounds epic and credit to you

Ah yeah the intercooler rather large

Thanks Sam :-) well if ur going to intercool may as well go big lol thing is its not much bigger then my last one lol just looks nicer :-) didn't have to cut any more out of my bumper witch was good  lol 

[Paul Baldwin]

Nice one Paddy. Really hoping it performs for you

[pioneer DJ paddy]

Nice one Paddy. Really hoping it performs for you

Thanks Paul me to lol shouldn't be long nw till wee all see lol just drive shafts and stuff to finish of nw like :-)

[pioneer DJ paddy]

Finally got my car back together dive shafts back in and all that lol small oil leak Dow so need to sort that out also waiting on some pipes to finish it off like 90° and stuff as u will see in the pics lol any here's how she looks now :-)

[attachment=21624][attachment=21623][attachment=21622][attachment=21621][attachment=21619][attachment=21620]

---

[attachment=21625][attachment=21626]

---

Also my turbo made a flutter sound so had to video that lol I no its not good to rev up a car and switch it off but just done it for this video :-)

https://m.youtube.com/watch?v=blb1Da2NAoQ
 

[silverzx]

Woop woop! Good lad!

[pioneer DJ paddy]

Thanks man :-)

[pioneer DJ paddy]

So got a bit more done to day wif the piping from one turbo to the other wasn't mutch room back there lol but getting there slowly :-) just need to finish off the top turbo now and then I'm done lol 


[attachment=21857][attachment=21859]


[attachment=21858]

[attachment=21860]

[attachment=21861]

[Tom]

Looks and sounds awesome! Now it just needs to go into a really old citroen shell or something!

[pioneer DJ paddy]

Also got the 90° pipe to finish off the top end of the piping lol 

[attachment=21864]



[attachment=21863]

---

Looks and sounds awesome! Now it just needs to go into a really old citroen shell or something!

Lol thanks tom BT that engine is going no were for a while lol

[Pebbles167]

Don't know how I managed to miss this. Had a read through the thread, looking awesome.

I take it this is a first? Certainly don't recall anyone else doing something like it!

[pioneer DJ paddy]

Don't know how I managed to miss this. Had a read through the thread, looking awesome.

I take it this is a first? Certainly don't recall anyone else doing something like it!

Lol don't think any one has done it with a kkk turbo so probably a first ye hopefully it hasn't all been a waste of time lol but weee shall see 

[silverzx]

Paddy where's your oil return on gearbox mounted one returning to?

[pioneer DJ paddy]

I got a  T pipe from a transit so it'd running back in to original oil return lol

[Poodle]

Don't know how I managed to miss this. Had a read through the thread, looking awesome.

I take it this is a first? Certainly don't recall anyone else doing something like it!

Not by a long shot, Darren's done it to death lol, he's not the only one either. 

Almost there now Paddy, what's left to do?

[pioneer DJ paddy]

Don't know how I managed to miss this. Had a read through the thread, looking awesome.

I take it this is a first? Certainly don't recall anyone else doing something like it!

Not by a long shot, Darren's done it to death lol, he's not the only one either. 

Almost there now Paddy, what's left to do?

all boost pipes done now poodle just an oil leak to fix and she's ready lol she's very fast boosting well over 30psi so going to need a bigger boost gages at sum point :-) how ur car coming a long .

[pioneer DJ paddy]

Finally finished lol here's pics [attachment=22063][attachment=22062][attachment=22064]

[silverzx]

Yes Paddddddy!!

[pioneer DJ paddy]

Yes Paddddddy!!

Lol long ordeal finally over 

[Poodle]

Nice! Let's see some videos.

Mine's almost there, just a few bits to finish up.

[pioneer DJ paddy]

Nice! Let's see some videos.

Mine's almost there, just a few bits to finish up.

Thanks poodle will get sum up wen ever I get it throw  mot if it passes now with the turbo were it is nw :-) can't wait ta see u r car wen its on the road should be interesting lol

[Piggy]

Awesome! videos needed asap!

[zx_volcane]

Ahh finally all plumbed in and working - this is great news Paddy

See how it goes, test it all out - at the very least you have all the logistics in place for the twin turbo setup, so if the choice of turbos doesn't work out you can just replace them and crack on.

Progress on this has been mega quick.

Have you installed a couple of boost gauges so you can see what it is after each turbo? Might be useful to know.

Also an emp gauge too so you can see how much back pressure you're creating.

[7057sam]

Well done paddy looks absolutely epic