Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
hdi feels sluggish? please help
#1
My hdi feels sluggish, could anyone give me any ideas on things to look into, cheers
#2
Check the basics first. Are any brakes binding?
When was it last serviced?
Is there an EML?
#3
Brakes are not binding, i reckon it could do with service, whats eml?
#4
Poss air mass metre. Unplug it and see what it goes like

EML is engine management light
#5
(08-02-2015, 09:02 AM)Frosty Wrote: Poss air mass metre. Unplug it and see what it goes like

EML is engine management light

This is my suggestion too, had been suffering from sluggish performance as well, unplugging the MAF made all the difference! lol
[Image: P1060836_zpsz3xgxt7q.jpg]
#6
What should un plugging my maf result in?
#7
If the MAF is broken, the car will be quicker with it unplugged.

I notice that you've a V plate HDi - if it's an early V then it might have the ECU that'll just put the EML on and go into limp mode if you unplug the MAF. Later V reg's and newer won't.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
#8
Or the car will be no different, this also indicates a dead maf. Otherwise as above.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



#9
Just for an update i un plugged my maf and it now goes like f***
#10
DO NOT buy crappy aftermarket or second hand, IMHO it's well worth the money getting a new OE quality one..
Welding and fabrication projects undertaken, contact me for more information.

#11
Do a 30-70 time in 3rd gear and tell us what it is. That'll show whether there's a problem or whether it's just standard, they aren't fast/pokey/quick (whatever you want to call it) in standard form.

EDIT: Just seen your MAF's goosed, that'd do it!
[Image: Ty8kl7b.jpg]
#12
(17-02-2015, 04:56 PM)Jonny81191 Wrote: DO NOT buy crappy aftermarket or second hand, IMHO it's well worth the money getting a new OE quality one..

Can't emphasise this enough, buy new! Siemens vdo is what you're looking for, although they're now just marked as siemens. Or possibly vdo, one or the other, can't remember lol, euros sell it, i know that much. lol
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



#13
out of interest what are the 30-70 times supposed to be?
Given the choice between Niall and the sheep. I would choose the sheep!
/Toseland
#14
Around 10-11 seconds standard and about 8-9 seconds on a stage 1 map IIRC
[Image: Ty8kl7b.jpg]


Possibly Related Threads…
Thread Author Replies Views Last Post
  HDi sluggish starting Piggy 19 11,245 19-12-2017, 11:32 AM
Last Post: jamesgmg
  306 feels slow. tysonbully2k12 22 13,878 06-08-2014, 01:30 PM
Last Post: Poodle

Forum Jump:


Users browsing this thread: 1 Guest(s)