Ozonehostiles Blurple gti6.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ozonehostiles Blurple gti6.
(29-06-2014, 11:26 PM)7057sam Wrote: Ah this just epic, great inspiration for me Smile

Can't wait to get me secret winter build started now..

Ooooooooooo what you upto :p another boosted track car??
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Anyone else had problems with very stiff lowered cars eating through track rod ends?

My n/s one has deteriorated pretty quickly, only done about 600 miles.

Replacing both of them tonight and see if it was just a one off incident
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
They are utter porn! Will look even better in the bay

All my pugs have been slammed and only issue I had was ruining drop links went through 3 sets in 1500 miles so f*cked them off and ran without and the odd p bush never had issues with track rod ends though
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
Why not get some adjustable drop links? They'll have paid for themselves instead of a couple of pairs of stock droplinks
[Image: Ty8kl7b.jpg]
Reply
Thanks given by:
Didnt Ozone say tre not droplinks?!
Wishes for more power...
Reply
Thanks given by:
Think he may have been referring to me?

It was slammed on 40 profile tyres on stiff suspention so there was no body roll anyway just sacked them off
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
Hopefully it was just a dodgy part, the other side was fine (changed it anyway)

Get it tracked properly again tomorrow and see how long this one lasts

I have noticed the droplinks are wearing out pretty quickly, anyone recommend some decent adjustable ones?
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Yeah my bad, skim read and saw danny's comment re: drop links.
[Image: Ty8kl7b.jpg]
Reply
Thanks given by:
I'm low and don't have problems with wearing out either. my problem has always been drive shafts.
Reply
Thanks given by:
(01-07-2014, 09:13 PM)Dum-Dum Wrote: I'm low and don't have problems with wearing out either. my problem has always been drive shafts.

What happens to yours?
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
All the bushes and parts we replaced on the rallye 3 months ago are worn out again lol

Driveshafts eat cv joints on lowered cars usually due too the increased running angle
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
yep, CVs. It seems to wear the boots out especially fast because of the increased running angle and they split and spray grease everywhere and die.
Reply
Thanks given by:
(02-07-2014, 12:09 AM)Dum-Dum Wrote: yep, CVs. It seems to wear the boots out especially fast because of the increased running angle and they split and spray grease everywhere and die.

I was forever changing shafts on all my saxos and 106's. Lowered lifestyle problems bruh!
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
Lol, well I've gone through one cv boot so far, caught it when it was a tiny pinhole though so didn't lose much grease.... See how long it lasts aha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
about the throttle bodies... I think you'll struggle to find ANYONE who will touch the stock marelli ECU and be able to map it for bodies, except Chip Wizards up here.

That said, I have a perfectly good spare room, bacon and I'm 35 mins from Chip Wizards HQ....

JP
JP
Reply
Thanks given by:
(02-07-2014, 07:48 PM)jammapic Wrote: about the throttle bodies... I think you'll struggle to find ANYONE who will touch the stock marelli ECU and be able to map it for bodies, except Chip Wizards up here.

That said, I have a perfectly good spare room, bacon and I'm 35 mins from Chip Wizards HQ....

JP

I thought that might be the case dude, and tbf I think for what Wayne charges it only makes sense.

Just need to save up a few hundred quid for mapping then I'll be in touch Smile
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
New track rod ends fitted and laser alignment done. Hopefully last longer than 600 miles this time

In other news I've got a mysterious suspension knock :/ have a feeling it's a droplink.

Will try some ph1 style metal ones, see how they fare
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
I'd love to see this car in the flesh, it looks epic mate!
Reply
Thanks given by:
(04-07-2014, 08:49 PM)callumcull Wrote: I'd love to see this car in the flesh, it looks epic mate!

Cheers dude Smile coming to pugfest?

Trip to Wolverhampton tonight to get an estate full of nile parts, thanks Chris, you're a legend Big Grin
[Image: 20140704_233041_zpsb8pzc2pb.jpg]

Pictures of stuff fitted tomorrow
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Nah unfortunately not, I start at hms raleigh on Sunday so will be pretty tied up for a while. One day though... Big Grin
Reply
Thanks given by:
(04-07-2014, 11:09 PM)callumcull Wrote: Nah unfortunately not, I start at hms raleigh on Sunday so will be pretty tied up for a while. One day though... Big Grin

Shame man Sad hopefully the car will be bodied when you do get to see it though haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Decided to do a couple of bits in preparation for pugfest tonight after work.

So bumper off [Image: 20140709_183851_zpst2hs0lrr.jpg]

No picture because it's boring, but basically did some more rust prevention on the inner wings and crossmember

Anyway, reason for replacing the bumper [Image: 20140709_183859_zpsjtagahom.jpg]

Swapping over rallye blanks, numberplate and gti splitter [Image: 20140709_190515_zpsjpzkxvfh.jpg]

And all done [Image: IMG_20140709_215655_zps4cijbfdy.jpg]
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Love it. Looks great Smile
JP
Reply
Thanks given by:
(09-07-2014, 09:57 PM)jammapic Wrote: Love it. Looks great Smile

Thanks man Smile hopefully it'll be looking awesome under the bonnet soon too :p
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Looking good Zakk, Did those marks come out?
Reply
Thanks given by:
The metal links was the ones I had issues with broke the ball joint out the socket on 3 pairs lol

Was going to try plastic as they have a bit of give but just f*cked it off and ran no links

Looking well mate get them bodies on :p
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
Ozone where the bodies off eBay? I remember some guy selling some off a high spec 205 iirc
Reply
Thanks given by:
(09-07-2014, 10:47 PM)Chris1357 Wrote: Looking good Zakk, Did those marks come out?

Yeah man they did, bit of wd40 cleaned it up really nice. Giving it a proper clean over the next few days ready for pugfest Smile

(09-07-2014, 10:55 PM)Danny2009 Wrote: The metal links was the ones I had issues with broke the ball joint out the socket on 3 pairs lol

Was going to try plastic as they have a bit of give but just f*cked it off and ran no links

Looking well mate get them bodies on :p

Metal ones are doing well so far and a few quid cheaper than plastic so I'm happy with them until I get some rose jointed ones Smile

(09-07-2014, 10:55 PM)Danny2009 Wrote: The metal links was the ones I had issues with broke the ball joint out the socket on 3 pairs lol

Was going to try plastic as they have a bit of give but just f*cked it off and ran no links

Looking well mate get them bodies on :p

Metal ones are doing well so far and a few quid cheaper than plastic so I'm happy with them until I get some rose jointed ones Smile

(09-07-2014, 10:55 PM)Danny2009 Wrote: The metal links was the ones I had issues with broke the ball joint out the socket on 3 pairs lol

Was going to try plastic as they have a bit of give but just f*cked it off and ran no links

Looking well mate get them bodies on :p

Metal ones are doing well so far and a few quid cheaper than plastic so I'm happy with them until I get some rose jointed ones Smile
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
(09-07-2014, 11:09 PM)Lwilliams Wrote: Ozone where the bodies off eBay? I remember some guy selling some off a high spec 205 iirc

Nooo, this set were out of jonny b's garage, been in there for years! Haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Is this being hooned up the hill at pugfest?

Really is a tidy example and that your keeping it that way.

Still think you should finish the DT though Tongue

PS. jealous of your ramp.
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 4 Guest(s)