FCS - So what have you got left to do?

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FCS - So what have you got left to do?
#61
Still paint interior and td04 for me..
Reply
Thanks given by:
#62
(01-05-2014, 06:58 PM)Niall Wrote: Ive got to change the sump, service it, fit the new charger outlet and boost piping re routing, tidy up loom and give the car a good detailing as its a right state. Also if i get the time, re paint the callipers as i got brake fluid on them Sad

Service it: Check
Fit charger outlet: Check
Boost piping: Almost check
Today loom: Check
Detail it: Sort of

New list
Take it for remapping day before FCS so its not massively overfulelling due to more boost
Get smaller charger pulley fitted
oil change after mapping
Paint some of the shitty bits in the engine bay
hope it makes it!

The list keeps growing Sad
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#63
My list;

- Paint spare engine block.
- Paint slam panel and other engine bay parts
- Black mask headlights
- Repaint calipers & bleed brakes
- Remove old engine & do engine swap including removing all stage 2 goodies
- Degrease & touch up paint in engine bay
- Coolant
- Oil & Filter
- Fit new interior
- Stage 1 mapping
- New front tyres
- Full detail & interior valet
- MAYBE false floor the boot.

all to be done in a week after exams are finished, hopefully get it all done Big Grin
Reply
Thanks given by:
#64
Mine got a wash and hoover today. Then the exhaust fell off as i reversed on to my driveway. Undecided
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#65
I need to start walking now if Im going to make it in time. Also 2 hours open pit session... Ill give it a go running but dont think I can keep going round for 2 hours!
Reply
Thanks given by:
#66
Well ny exhaust hanger broke today, but I think I have a rattle or something coming from engine bay, maybe a little tap Undecided
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#67
Srowell, how do you go about track time in an open pit session? Just queue to get on & stay on till you want/need off?
Reply
Thanks given by:
#68
fcs getting closer - haven't done anything on my list yet!
Reply
Thanks given by:
#69
Hi All,

Just bought my tickets for FCS including the vip camping thing. we are all buying the camping via fcs right?

TO.DO inside.:

Paint car from inside
put seats,
windows
doors,


To Do Outside:
refit gearbox
fit bootlid
fit rear axle
fit rear bumper
fit sideskirts
finish glassfibre
primer
paint


.....so if anyone is bored or has free time in the next two weeks!!! please give me a shout!!! Smile

Looking forward to seeing you all there.

Dom
Reply
Thanks given by:
#70
Just waiting for my rallye blanks to turn up from Peugeot and continued searching in vain for a mint front bumper
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#71
Good to see I'm not the only one with a list of jobs to do before the show. It seems I have a bit less to do too Smile

- Check wheel spacers clear brakes with cyclones
- Replace thermostat sensors and change coolant
- Change gearbox fluid
- Learn how to drive the car again
- Hope and pray it doesnt break on way there or on track!
Chris
1999 China GTi6 Supercharged track car
2000 Bianca LX non turbo slowness

Team: I hate Sam Rowell's stanceboard!
Reply
Thanks given by:
#72
(19-05-2014, 09:36 AM)cjm_harris Wrote: Good to see I'm not the only one with a list of jobs to do before the show. It seems I have a bit less to do too Smile

- Check wheel spacers clear brakes with cyclones
- Replace thermostat sensors and change coolant
- Change gearbox fluid
- Learn how to drive the car again
- Hope and pray it doesnt break on way there or on track!

Do still have the same problem from pugfest last year?
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#73
I have break down cover so I'm now worrying a little less about getting to fcs!
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#74
I have a huge list still left todo -.-

Fit radiator making some brackets to hold in place
Fit ducts in fog light
Cam belt
Aux belt (a/c removal)
Fit broken water hose by thermostat
Finish off rear brake lines
Get harnesses
Fit the rear poly-carbonate windows
Spray foot wells (if I get chance)
Wrap exhaust
Spray fiberglass bonnet and boot
Put ally floor pieces in with grip tape on
Service it
Change gearbox oil
Finish roll cage off
Find a male union piece to fit in the hydraulic handbrake
Reply
Thanks given by:
#75
Ive done some of my things....

So it mostly stands at...

Clean it,
paint things,
put the interior back together.
relocate ECU
tidy up a little bit of wiring...

oh and plumb power steering and assisted braking... probably should do that.
Reply
Thanks given by:
#76
Still need to fit offset dowels & janspeed exhaust
Anyone about to help out?
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
#77
Lots to do! No spare time to do it with two toddlers Sad
Reply
Thanks given by:
#78
I feel like i should have more to do, it un nerves me a little that my list consists of:

Clean car, get it detailed if i cba.

And im not on stand im in the themed paddock. I should have loads to do.
[Image: sig002_zpscb892e18.jpg]
Reply
Thanks given by:
#79
Well the 205 dturb Is goimg in for paint this weekend!! Dark metallic blue with anthracite saxo vtr wheels
Reply
Thanks given by:
#80
Steve, if you are struggling - bring it over to mine and we can do it here.

JP
JP
Reply
Thanks given by:
#81
Well my parts to fix the fuel leak (hopefully) are here as is the plate for the passenger bucket and the 10mm lines are on order so were getting there.

Oh and my track day lid is here and fits Smile
Reply
Thanks given by:
#82
So you'll be the giant helmet wearing the giant helmet then whistle
[Image: sigcopy-1.jpg]
Diablo Meridian HDi - 125bhp - 73.0MPG - Halfords Wheels
Reply
Thanks given by:
#83
(22-05-2014, 05:36 PM)Kezzieboy Wrote: So you'll be the giant helmet wearing the giant helmet then whistle

Yep Smile

Fixed my fuel leak so thats one thing off the list.
Reply
Thanks given by:
#84
Still need to buy several tons of beer Big Grin
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Reply
Thanks given by:
#85
My plans have possibly changed, might be ditching the hdi estate, and picking up a dirt cheap xud estate instead. SHOULD have a car for FCS, hopefully it'll still be a french one! lol
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#86
Less than 2 weeks to go and so much to do,
Decided to do an oil change before since I'm still running the stuff from the last combe day and want to make sure there's some fresh oil in there for the 2 hours of abuse Tongue Going to put in some magnatec
Got cam locking tool now so can add in the advancing dowels, just not sure what benefits they'll give as the rover lot are pretty poor with information
Manifold gasket has arrived ready for new exhaust which waits for me in southampton
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
#87
Decided I'd sort my front bumper out as it didn't seem to be held on properly on the drivers side. Seems both the bolts are snapped so it's now held on with cable ties because306.

Intended to paint rear brakes and maybe wash/polish it but the above has put me in a cba mood.
Reply
Thanks given by:
#88
I'm literally about to go out and do my 10mm fuel lines and wishbones now I have new ball joint pinch bolts
Reply
Thanks given by:
#89
Cars in bits, I need to change my engine mounts. Change my bumper, put gti6 splitter on, clean the car and ill see what else I get time to do
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#90
Everything done on mine apart from major wash and clay bar

Parked in the drive and won't be driven till thursday Smile
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)