P Bushes + Wishbones

[Tom]

Man they're some pretty linkages. How do they feel Tom? Giggidy.

[Toms306]

Feel nice, tight and precise. Also seems to have shortened the throw slightly too which I didn't expect, getting first isn't a massive stretch as it was before.

[bigcheez2k3]

How much were they? Been considering the Baker BM ones Grant is doing in the group buy.

[Toms306]

I think miles is doing a group buy on them at 30 posted.

[ADV_93]

Lemforder ftw

[Eeyore]

awesome work tom Need to do this on my 1.8.

[devils_fuel]

It's actually the later mk1 berlingos that had them bushes mainly the heavier payload versions. I'v got berlingo on an s reg with just the standard p bushes as on the 306

Didn't you fit the partner/berlingo bushes to a 306 or is that someone else, it was a good thread !

---

Tom its easy, cut the rubber so its just the sleeve left on the wishbone, then hacksaw a diagonal line across it, but before you get all the way though, hit it with a hammer and crack the last bit and they practically fall off

Indeed they do

That all sounds familiar...did you ever do the write up after taking the pics changing the pair of mine? Both mine need doing again

[Toms306]

It's actually the later mk1 berlingos that had them bushes mainly the heavier payload versions. I'v got berlingo on an s reg with just the standard p bushes as on the 306

Didn't you fit the partner/berlingo bushes to a 306 or is that someone else, it was a good thread !

---

Tom its easy, cut the rubber so its just the sleeve left on the wishbone, then hacksaw a diagonal line across it, but before you get all the way though, hit it with a hammer and crack the last bit and they practically fall off

Indeed they do

That all sounds familiar...did you ever do the write up after taking the pics changing the pair of mine? Both mine need doing again

I ended up breaking several hacksaw blades and running out of time...for a few quid and 5 minutes the garage taking them off was definitely the best option for me lol.

[devils_fuel]

Connor and I used one hacksaw blade as that was all I had took us 5 mins to cut through each side, you need to make sure the cut is straight and not under strain

[daddyfixit]

the ones I fitted in march have turned into wet cornflakes already........going to price up meyle hd ones in the morning as theres a factors near my work that are a meyle distributor . ces,euro,gsf ones all seem poo ??