Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
10-06-2013, 01:21 PM
(This post was last modified: 02-12-2013, 03:36 PM by ginge191.)
Everything that is needed to know about previous issues/problems have been rectified and is a runner and can be verified via Rich306 or Vaughan who both had a ride in the car albeit with a broken TMIC (which has been replaced)
Gauging interest into whether anybody is willing to take the 205 as it stands plus all the extras and information to go with it (VNT turbo, FMIC, ARB setup, springs, brakes etc. which all are not standard to the 205)
OR
Whether there is much interest in terms of breaking this up.
What there is to be broken up which is 306 relevant
XUD9 engine covered 30k
Bosch pump, lines, injectors
T2 turbo - covered 30k, VERY clean
Gearbox + paddle clutch
boost gauge + vent mount (205)
straight through exhaust (205)
TD25 VNT turbo, clocked, oil line + manifold to adapt
Post up any interest and i'll see what can be done with this.
So this is back up again.
IF there was a potential buyer i'd be looking for about £500-£600 for it as a whole, working car with tax until feb and MOT until about May/June i believe.
If there's enough scope for the spare parts i'd be happy enough breaking it up.
![[Image: Njq3ZXF.jpg]](http://i.imgur.com/Njq3ZXF.jpg)
Phaes 1 GTI 6 - Onyx Black
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
So this is back up again.
IF there was a potential buyer i'd be looking for about £500-£600 for it as a whole, working car with tax until feb and MOT until about May/June i believe.
If there's enough scope for the spare parts i'd be happy enough breaking it up.
Phaes 1 GTI 6 - Onyx Black
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Cleaned up 
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
Cheers mate 
Phaes 1 GTI 6 - Onyx Black
Posts: 2,035
Threads: 63
Joined: Mar 2012
Reputation:
26
Location: Bicester
Car Model/Spec: GTi6
Shame to see this go 
Posts: 1,064
Threads: 29
Joined: May 2012
Reputation:
18
Location: Portsmouth
Car Model/Spec: mx5 mk1 1.8
Beats sitting in a garage not being used though....
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
why you not using this?
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
Now a teacher, need something "more" reliable, need a more professional image etc. etc.
Phaes 1 GTI 6 - Onyx Black
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
So your using the beast that is the 206? lol
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
(02-11-2013, 07:40 PM)ginge191 Wrote: Now a teacher, need something "more" reliable, need a more professional image etc. etc.
why? . . . they going to sack you for driving a modded 205? . . . . .pfffft sheep . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
It's a GI thread..
Phaes 1 GTI 6 - Onyx Black
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
(03-11-2013, 02:36 PM)ginge191 Wrote: It's a GI thread..
i know, i'm interested to know why you're such a queef........ 
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 623
Threads: 39
Joined: Dec 2011
Reputation:
0
Location: Dewsbury
Car Model/Spec: 306 gti6
I would snap this up but your just too far away
Posts: 1,804
Threads: 129
Joined: Mar 2012
Reputation:
11
The head teacher at my mums school had a 205 Roland Garros for years
Stage 2 XUD Sedan
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
(03-11-2013, 04:20 PM)strictly_perv Wrote: The head teacher at my mums school had a 205 Roland Garros for years
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
There was a teacher at our school that rocked up in a 2cv and another in a old 305 gti.. ..both epic teachers in my view just coz of that
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
My missus is teaching and rocking up in a 205 every day, don't tell me she's more man than you?
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
Have you seen hers in comparison..
Phaes 1 GTI 6 - Onyx Black
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
First to come along and take it.
Looking for scrap value - £150 - will need towing/trailer away.
Includes MOT/TAX for a fair bit of time, at least 5 months IIRC.
Needs to go!
Phaes 1 GTI 6 - Onyx Black
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
Why's it need towing/trailering away? What's up with it?
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Wait 150 for the car and all the bits?
Doesnt even own a 306.
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
(01-12-2013, 04:19 PM)Chris_90 Wrote: Why's it need towing/trailering away? What's up with it?
The locking pin snapped whilst i was tightening the crank pulley bolt, it's just wedged on the fly. gearbox off jobby. It's not a particularly difficult job to do. apart from that.
(01-12-2013, 04:20 PM)Tom Wrote: Wait 150 for the car and all the bits?
yeh
Phaes 1 GTI 6 - Onyx Black
Posts: 7,825
Threads: 465
Joined: Dec 2011
Reputation:
114
Location: Cullompton Devon
Car Model/Spec: Vauxhall
gear box off !!
bet you could get it with the sump off as long as the flywheel turns
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
flywheel doesnt turn; box will need to come off
Phaes 1 GTI 6 - Onyx Black
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
Any one no of a cheap company to move this from Portsmouth to Chesterfield?? Very interested if I can get it back cheap enough
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Anyvan.com
Doesnt even own a 306.
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
(01-12-2013, 06:31 PM)Tom Wrote: Anyvan.com
Done that one waiting for an e-mail back
Posts: 5,203
Threads: 110
Joined: Jan 2012
Reputation:
20
Location: Devon
Car Model/Spec: Estate, DT, GTI6 and 205
(01-12-2013, 03:25 PM)ginge191 Wrote: First to come along and take it.
Looking for scrap value - £150 - will need towing/trailer away.
Includes MOT/TAX for a fair bit of time, at least 5 months IIRC.
Needs to go!
Mate don't give up on this! Even if you don't do anything to it till the new year and it gets warmer/lighter evenings. You will regret get rid if you do!
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
Sold
wish it was that simple. Stubborn garage "owners" prevent this from going any further.
Phaes 1 GTI 6 - Onyx Black
Posts: 3,539
Threads: 42
Joined: Mar 2012
Reputation:
28
derp, learnt the hard way that timing pins are not locking tools I guess! :p
|
