+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: 205 XUD SOLD (/showthread.php?tid=14558)
Pages:
1
2
205 XUD SOLD - ginge191 - 10-06-2013
Everything that is needed to know about previous issues/problems have been rectified and is a runner and can be verified via Rich306 or Vaughan who both had a ride in the car albeit with a broken TMIC (which has been replaced)
Gauging interest into whether anybody is willing to take the 205 as it stands plus all the extras and information to go with it (VNT turbo, FMIC, ARB setup, springs, brakes etc. which all are not standard to the 205)
OR
Whether there is much interest in terms of breaking this up.
What there is to be broken up which is 306 relevant
XUD9 engine covered 30k
Bosch pump, lines, injectors
T2 turbo - covered 30k, VERY clean
Gearbox + paddle clutch
boost gauge + vent mount (205)
straight through exhaust (205)
TD25 VNT turbo, clocked, oil line + manifold to adapt
Post up any interest and i'll see what can be done with this.
So this is back up again.
IF there was a potential buyer i'd be looking for about £500-£600 for it as a whole, working car with tax until feb and MOT until about May/June i believe.
If there's enough scope for the spare parts i'd be happy enough breaking it up.
![[Image: Njq3ZXF.jpg]](http://i.imgur.com/Njq3ZXF.jpg)
RE: GI: 205 XUD + the rest - ginge191 - 02-11-2013
So this is back up again.
IF there was a potential buyer i'd be looking for about £500-£600 for it as a whole, working car with tax until feb and MOT until about May/June i believe.
If there's enough scope for the spare parts i'd be happy enough breaking it up.
RE: GI: 205 XUD + the rest - Niall - 02-11-2013
Cleaned up
RE: GI: 205 XUD + the rest - ginge191 - 02-11-2013
Cheers mate
Re: GI: 205 XUD + the rest - vlj - 02-11-2013
Shame to see this go
RE: GI: 205 XUD + the rest - MissTap_GTI6 - 02-11-2013
Beats sitting in a garage not being used though....
RE: GI: 205 XUD + the rest - Mattcheese31 - 02-11-2013
why you not using this?
RE: GI: 205 XUD + the rest - ginge191 - 02-11-2013
Now a teacher, need something "more" reliable, need a more professional image etc. etc.
RE: GI: 205 XUD + the rest - Niall - 03-11-2013
So your using the beast that is the 206? lol
RE: GI: 205 XUD + the rest - Mattcheese31 - 03-11-2013
(02-11-2013, 07:40 PM)ginge191 Wrote: Now a teacher, need something "more" reliable, need a more professional image etc. etc.
why? . . . they going to sack you for driving a modded 205? . . . . .pfffft sheep . .
RE: GI: 205 XUD + the rest - ginge191 - 03-11-2013
It's a GI thread..
RE: GI: 205 XUD + the rest - Mattcheese31 - 03-11-2013
(03-11-2013, 02:36 PM)ginge191 Wrote: It's a GI thread..
i know, i'm interested to know why you're such a queef........
RE: GI: 205 XUD + the rest - Strikeforce - 03-11-2013
I would snap this up but your just too far away
RE: GI: 205 XUD + the rest - strictly_perv - 03-11-2013
The head teacher at my mums school had a 205 Roland Garros for years
RE: GI: 205 XUD + the rest - Mattcheese31 - 03-11-2013
(03-11-2013, 04:20 PM)strictly_perv Wrote: The head teacher at my mums school had a 205 Roland Garros for years
RE: GI: 205 XUD + the rest - Piggy - 03-11-2013
There was a teacher at our school that rocked up in a 2cv and another in a old 305 gti.. ..both epic teachers in my view just coz of that
RE: GI: 205 XUD + the rest - Poodle - 03-11-2013
My missus is teaching and rocking up in a 205 every day, don't tell me she's more man than you?
RE: GI: 205 XUD + the rest - ginge191 - 03-11-2013
Have you seen hers in comparison..
RE: 205 XUD + the rest - scrap value!? - ginge191 - 01-12-2013
First to come along and take it.
Looking for scrap value - £150 - will need towing/trailer away.
Includes MOT/TAX for a fair bit of time, at least 5 months IIRC.
Needs to go!
RE: 205 XUD + the rest - scrap value!? - Chris_90 - 01-12-2013
Why's it need towing/trailering away? What's up with it?
RE: 205 XUD + the rest - scrap value!? - Tom - 01-12-2013
Wait 150 for the car and all the bits?
RE: 205 XUD + the rest - scrap value!? - ginge191 - 01-12-2013
(01-12-2013, 04:19 PM)Chris_90 Wrote: Why's it need towing/trailering away? What's up with it?
The locking pin snapped whilst i was tightening the crank pulley bolt, it's just wedged on the fly. gearbox off jobby. It's not a particularly difficult job to do. apart from that.
(01-12-2013, 04:20 PM)Tom Wrote: Wait 150 for the car and all the bits?
yeh
RE: 205 XUD + the rest - scrap value!? - cully - 01-12-2013
gear box off !!
bet you could get it with the sump off as long as the flywheel turns
RE: 205 XUD + the rest - scrap value!? - ginge191 - 01-12-2013
flywheel doesnt turn; box will need to come off
RE: 205 XUD + the rest - scrap value!? - Chris_90 - 01-12-2013
Any one no of a cheap company to move this from Portsmouth to Chesterfield?? Very interested if I can get it back cheap enough
RE: 205 XUD + the rest - scrap value!? - Tom - 01-12-2013
Anyvan.com
RE: 205 XUD + the rest - scrap value!? - Chris_90 - 01-12-2013
(01-12-2013, 06:31 PM)Tom Wrote: Anyvan.com
Done that one waiting for an e-mail back
RE: 205 XUD + the rest - scrap value!? - Frosty - 01-12-2013
(01-12-2013, 03:25 PM)ginge191 Wrote: First to come along and take it.
Looking for scrap value - £150 - will need towing/trailer away.
Includes MOT/TAX for a fair bit of time, at least 5 months IIRC.
Needs to go!
Mate don't give up on this! Even if you don't do anything to it till the new year and it gets warmer/lighter evenings. You will regret get rid if you do!
RE: 205 XUD + the rest - scrap value!? - ginge191 - 02-12-2013
Sold
wish it was that simple. Stubborn garage "owners" prevent this from going any further.
RE: 205 XUD SOLD - welshpug - 02-12-2013
derp, learnt the hard way that timing pins are not locking tools I guess! :p