The Racetractor. The End.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The Racetractor. The End.
I really need to get the waxoyl out on my arches while its still warm.
Thanks given by:
Cracking progress here. What underseal did you use and how did you find working with it?
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Thanks given by:
I got brush on stuff...but find I have to heat it up and its messy...so used spray can for the arches...was much easier
Wishes for more power...
Thanks given by:
Looks a tidy job that, as ever.

I think you can get a kit with a hand pump, spray gun and everything else you need from waxoyl for about £70, dad was waving one about the other day.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Thanks given by:
yeah but I got 3cans for £15. and a 1L tub for 7quid from me motor factors.
that'll do all I needz!!
Wishes for more power...
Thanks given by:
(25-07-2013, 06:45 PM)Poodle Wrote: Looks a tidy job that, as ever.

I think you can get a kit with a hand pump, spray gun and everything else you need from waxoyl for about £70, dad was waving one about the other day.

I dont think it was even that much (ive got the massive drum and a trigger spray)
Thanks given by:
well its worthwhile for you dumdum...with needing to do a car a month.. but for me, doing one car...70quid is bit too much!
Wishes for more power...
Thanks given by:
Lol too funny!

Was it actual waxoyl stuff you used?
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Thanks given by:
yeah. think so anyway....just checking ..yup!

fyi: its good for keeping ya skin waterproof too!!!
Wishes for more power...
Thanks given by:
Haha, bitch to get off your mitts is it?
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Thanks given by:
(25-07-2013, 08:14 PM)Grant Wrote: Haha, bitch to get off your mitts is it?

brake cleaner ftw lmao

fyi: brake cleaner is a bitch on cuts!!
Wishes for more power...
Thanks given by:
That's just to let you know that you've cut your hand, especially in the winter
Thanks given by:
(25-07-2013, 08:14 PM)Piggy Wrote:
(25-07-2013, 08:14 PM)Grant Wrote: Haha, bitch to get off your mitts is it?

brake cleaner ftw lmao

fyi: brake cleaner is a bitch on cuts!!

Yeah so is DAZ lmao

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Thanks given by:
got few bits done today...yay

[Image: 20130728_190305_zpsede9fd5c.jpg]

[Image: 20130728_183826_zpsbb031ccb.jpg]

Smile Smile Smile

So, thats wishbones on with polybushes...bloody el that was a fight, front all undersealed, offside undersealed, bigger XUD fuel lines, lagged and fitted, and the NON abs brake lines half plumbed in, positioned up.

Started chucking it down, so inside now.

Any tips on removing top engine mount??? Chisel and hammer to get it started?? Got nice new OEM one to go on!
Wishes for more power...
Thanks given by:
Next is the engine mount, GTI arb, PAS rack, GTi M/C, suspension build up, ball joints, AUX setup on the 2.1, drill out the broken engine mount bolt, and trial fit ready to tack up a mani to turbo pipe!
Wishes for more power...
Thanks given by:
after a good chat with Mic at CG clutches, the Valeo clutch will be staying in there to get all systems going, then once happy, I will send my spare flywheel away to CG to have them build me a clutch to handle up to 500 ft lbs of torque...seems plenty!

Also with each step forward I seem to have to climb over a moutnain of issues.

Got A/C aux bracket fitted...now the alternator is wrong (managed to source a second hand one for not too much) and I need to source a 2.1 A/C pump as the one I have dont line up. (thus I have a nice shiny bosch alternator for sale now!)

[Image: 20130731_184221_zpse6c8ffc3.jpg]

I spent an hour drilling out the broken engine mount stud (thanks breakeryard) and found the cambelt cover needed cutting to accommodate the engine mount....thus leaving a gap that needs sorting.

[Image: 20130731_184215_zps06bcceb0.jpg]

Removed exhaust mani to remove egr blank and fit EGT sensor...cant find EGT sensor so need to sort out all me parts tonight!

On a better note...my dangly bits are painted...

[Image: 20130731_184320_zps56c2ca4b.jpg]

Used some plastidip in a rattle can for the Eibach springs...pretty crap stuff. but meh, starting to get to the point where I dont care anymore.
Wishes for more power...
Thanks given by:
Shes looking really good mate especially having seen it in the flesh, the attention to detail is amazing.
Thanks given by:
This is looking brilliant, absolutely chock full of science Smile
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Thanks given by:
(31-07-2013, 07:13 PM)THE_Liam Wrote: This is looking brilliant, absolutely chock full of science Smile

[Image: images?q=tbn:ANd9GcTO7kuraY--BJxzoRxkUl7...oLdcoMpXUw]
Welding and fabrication projects undertaken, contact me for more information.

Thanks given by:
science?! Have I missed something!?
Wishes for more power...
Thanks given by:
Makes sense if you've read the FCS highlights thread lol
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Thanks given by:
(31-07-2013, 07:44 PM)Piggy Wrote: science?! Have I missed something!?

Again you should of come to FCS

Rather than explain things to people we just tell them it "has lots of science" or "needs more science"
Thanks given by:
ok...... Blush Confused
Wishes for more power...
Thanks given by:
loosely fitted some of the shiny parts...

[Image: 20130801_173523_zpsc9fdf902.jpg]

[Image: 20130801_173534_zps9faea2f7.jpg]

may have to fit original arms while I wait for Powerflex to sort out the front bushes

Got hubs stripped down and painted too...

[Image: 20130801_173507_zps9c5ce47d.jpg]

waaaaaaay too hot for anything else
Wishes for more power...
Thanks given by:
Too much shiny!!!!!!



Your red engine is gonna clash with your colour scheme now though
Thanks given by:
can you come round a paint all the rusty bits on my car please lol

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Thanks given by:
And mine. I might advice driving it into an acid bath beforehand though.

Looks epic, I wish I had the space to do this to mine!
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Thanks given by:
I know it will clash but with funds being well into the minus now and still needing a part or two I am grabbing what paint I can...

any suggestions on brake caliper and M/C colour? I was thinking yellow? Just to make 'colour clashing' a theme!
Wishes for more power...
Thanks given by:
Has already been said but youve done an awesome job at this, looks really well!
[Image: 65613_10200761612710317_1548698655_n_zps68c27004.jpg]

CONVOI EXCEPTIONNEL
Thanks given by:
Dude if you really want to go multi coloured Ive got most shades of hammerite you can borrow/use
Thanks given by:


Forum Jump:


Users browsing this thread: 5 Guest(s)