11-03-2013, 12:23 AM
So here it is at fcs (i hadnt bought it at this point)
then here it is a few months after the fcs when the seller was selling it (didnt really like it at this point so i was looking for another derv)
then about for weeks later it had come down in price so i thought just with the stuff i knew he had done the engine it was worth while so i picked her up like this...
since buying it i havent really done much too it apart from this small list:
- Good Clean
- new pump bracket
- new timing belt and water pump got done when the bracket got changed
- new glow plugs
- new alternator and belt
- all filters done
- gets an oil change every 2/3 weeks
- Bosch Battery
- Double din head unit fitted
- new pads and discs
- 307 alloys
Things that need doing are as followed:
- new heater/fan switch (this should be sorted wednesday)
- rear bumper has mine has a crack (does any one have one? )
- new bonnet mine has minor dents in
- xantia manifold
- Fuel cut off solonoid (this will be done wednesday)
- Front Splitter
- Angel Headlights (orderedon there way)
the engine:
- xud of course
- td04
- fmic
- bosch pump
- grinded lda pin
- gov mod
- 11mm ford transit head
- Straight Through stainless exhaust
- Hdi rear axle
- lowered all round not sure on height think 60 on front back obviously torsion bar not sure how much
Boosting at a comfortable 28psi atm untill the new clutch comes mine isnt slipp just cba if it starts
few pics of her now
there probably a few things ive missed :/
then here it is a few months after the fcs when the seller was selling it (didnt really like it at this point so i was looking for another derv)

then about for weeks later it had come down in price so i thought just with the stuff i knew he had done the engine it was worth while so i picked her up like this...
since buying it i havent really done much too it apart from this small list:
- Good Clean
- new pump bracket
- new timing belt and water pump got done when the bracket got changed
- new glow plugs
- new alternator and belt
- all filters done
- gets an oil change every 2/3 weeks
- Bosch Battery
- Double din head unit fitted
- new pads and discs
- 307 alloys
Things that need doing are as followed:
- new heater/fan switch (this should be sorted wednesday)
- rear bumper has mine has a crack (does any one have one? )
- new bonnet mine has minor dents in
- xantia manifold
- Fuel cut off solonoid (this will be done wednesday)
- Front Splitter
- Angel Headlights (orderedon there way)
the engine:
- xud of course
- td04
- fmic
- bosch pump
- grinded lda pin
- gov mod
- 11mm ford transit head
- Straight Through stainless exhaust
- Hdi rear axle
- lowered all round not sure on height think 60 on front back obviously torsion bar not sure how much

Boosting at a comfortable 28psi atm untill the new clutch comes mine isnt slipp just cba if it starts
few pics of her now

there probably a few things ive missed :/

![[Image: mcetg0.png]](http://i57.tinypic.com/mcetg0.png)
![[Image: fe6eddc8-1731-4100-a5fe-1edb853a88b6_zpseeacf928.jpg]](http://i1236.photobucket.com/albums/ff441/big543/fe6eddc8-1731-4100-a5fe-1edb853a88b6_zpseeacf928.jpg)
![[Image: Untitled-1_zpsc57da38e.jpg]](http://i112.photobucket.com/albums/n180/w1n_2006/Untitled-1_zpsc57da38e.jpg)
![[Image: 306ocsig_edited-1-1.jpg]](http://i1204.photobucket.com/albums/bb416/declantg/306ocsig_edited-1-1.jpg)

![[Image: P1060836_zpsz3xgxt7q.jpg]](http://i1101.photobucket.com/albums/g427/wingnutz2/P1060836_zpsz3xgxt7q.jpg)
