| 
		
	
	
	
		
	Posts: 1,766 
	Threads: 252 
	Joined: Dec 2011
	
 Reputation: 
7 Location: Sheffield/Leeds
 Car Model/Spec: Xud sedan/Xud estate
 Thanks: 2Given 2 thank(s) in 2 post(s)
 
 
	
	
		I ran my hdi soo low the needle didn't even go into the red on many occasions and only cut out once :p mine also lit eml for afew days
	 
TD04 11mm Sedan, now 2.1 vnt 
Sedan Project http://306oc.co.uk/forum/thread-5763.html 
Provence Dturbo Dead 
Blaze 1.6 Dead 
China 5dr '6 Death by cambelt failure 
Matt White HDI estate Death by wiring 
Sedan Dturbo aka triggers broom 
Diablo estate Dturbo Living dead
		
	 
	
	
	
		
	Posts: 782 
	Threads: 18 
	Joined: Jan 2012
	
 Reputation: 
3 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Bit wank that from the french
	 
		
	 
	
	
	
		
	Posts: 8,019 
	Threads: 374 
	Joined: Dec 2011
	
 Reputation: 
38 Location: Isle of Wight
 Car Model/Spec: GTI 6
 Thanks: 8Given 16 thank(s) in 14 post(s)
 
 
	
	
		2 can play at this game ![[Image: 541781_10152711613185632_1423327988_n.jpg]](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/541781_10152711613185632_1423327988_n.jpg) 
		
	 
	
	
	
		
	Posts: 10,864 
	Threads: 117 
	Joined: Dec 2011
	
 Reputation: 
119 Location: Southampton
 Car Model/Spec: 306 HDi and friends
 Thanks: 13Given 106 thank(s) in 106 post(s)
 
 
	
	
		Tom's right, they cut off completely in higher gears on the hdi.
 But that still doesn't make it 0 mpg, quite the reverse haha!
 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		 (17-04-2013, 06:54 PM)Poodle Wrote:  Tom's right, they cut off completely in higher gears on the hdi.
 But that still doesn't make it 0 mpg, quite the reverse haha!
 
No it really IS 0 mpg if you think about it.  Yes you're covering miles, but you're using zero gallons - zero multiplied by anything will still be zero.  Or have I got my maths wrong?
	 
		
	 
	
	
	
		
	Posts: 4,135 
	Threads: 78 
	Joined: Dec 2011
	
 Reputation: 
49 Location: Chichester 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		17-04-2013, 07:56 PM 
(This post was last modified: 17-04-2013, 07:58 PM by Curt.)
	
	 
		Yes, you have got it wrong... it'd be 0GPM
 Oh and I ran out twice in my DT, it used to run out on a 1/4. Had my Audi reading 0 miles left twice too, made it though
 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		It makes no difference surely? 
Say you coast for 2 miles (long hill lol) 0gallons/2miles is still 0mpg.    
Whats odd with the Vec is it changes to gph under 8MPH - Gallon per hour lol......which is 0.1 while idling usually.
	
		
	 
	
	
	
		
	Posts: 4,135 
	Threads: 78 
	Joined: Dec 2011
	
 Reputation: 
49 Location: Chichester 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		No because for however long it is, you'll be doing, say, 80mpg. So for those 2 miles, you've saved a small amount of fuel. 0MPG is if you'd made no progress at all. Come on Tom, I thought you were the MPG expert?   
		
	 
	
	
	
		
	Posts: 408 
	Threads: 40 
	Joined: Mar 2013
	
 Reputation: 
0 Location: Devon
 Car Model/Spec: Moonstone Ph3 GTi-6
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		 (17-04-2013, 04:52 PM)ginge191 Wrote:  2 can play at this game
 
 
 ![[Image: 541781_10152711613185632_1423327988_n.jpg]](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/541781_10152711613185632_1423327988_n.jpg) 
Hahaha! Was that today?
	 
		
	 
	
	
	
		
	Posts: 19,854 
	Threads: 581 
	Joined: Dec 2011
	
 Reputation: 
195 Location: Bournemouth
 Car Model/Spec: Supercharged 306 GTi6
       Thanks: 36Given 82 thank(s) in 78 post(s)
 
 
	
	
		No tom because the engine still uses fuel to idle. Thats why its actually more economical to stay in gear with your foot off the throttle if the momentum will keep you at the speed you want. because the management usually cuts all fuel when in gear but 0 throttle.
	 
Team Eaton
 
 1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
 
 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		How can it be 80mpg? 
We need some maths experts here - zero multiplied or divided by ANYTHING is still zero.  You're using zero fuel, so 0mpg!
 
You could have a 500 mile hill and still do 0mpg as you wouldnt use any fuel at all...0 gallons!
 
Its not so difficult lol.   
		
	 
	
	
	
		
	Posts: 408 
	Threads: 40 
	Joined: Mar 2013
	
 Reputation: 
0 Location: Devon
 Car Model/Spec: Moonstone Ph3 GTi-6
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		But for the purpose to accurately work out fuel consumption, it would have to be 0MPG, rather than the 99999999.9999MPG the scanguage shows?
	 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
		
		
		17-04-2013, 08:13 PM 
(This post was last modified: 17-04-2013, 08:13 PM by Toms306.)
	
	 
		 (17-04-2013, 08:10 PM)Niall Wrote:  No tom because the engine still uses fuel to idle. Thats why its actually more economical to stay in gear with your foot off the throttle if the momentum will keep you at the speed you want. because the management usually cuts all fuel when in gear but 0 throttle. 
Err, thats what we're talking about Niall, keep up!  The injectors shut off if you're over about 1500rpm with no throttle.
 
It'll be using no fuel at all at that point.
 
  (17-04-2013, 08:12 PM)callumcull Wrote:  But for the purpose to accurately work out fuel consumption, it would have to be 0MPG, rather than the 99999999.9999MPG the scanguage shows? 
Finally!     Someone gets it lol.
	 
		
	 
	
	
	
		
	Posts: 19,854 
	Threads: 581 
	Joined: Dec 2011
	
 Reputation: 
195 Location: Bournemouth
 Car Model/Spec: Supercharged 306 GTi6
       Thanks: 36Given 82 thank(s) in 78 post(s)
 
 
	
	
		oh my bad!
	 
Team Eaton
 
 1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
 
 
		
	 
	
	
	
		
	Posts: 408 
	Threads: 40 
	Joined: Mar 2013
	
 Reputation: 
0 Location: Devon
 Car Model/Spec: Moonstone Ph3 GTi-6
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		17-04-2013, 08:15 PM 
(This post was last modified: 17-04-2013, 08:15 PM by callumcull.)
	
	 
		Do the injectors really cut off below 1500, the scanguage still displays 999.99 with no throttle under 1500? 
  (17-04-2013, 08:13 PM)Toms306 Wrote:   (17-04-2013, 08:10 PM)Niall Wrote:  No tom because the engine still uses fuel to idle. Thats why its actually more economical to stay in gear with your foot off the throttle if the momentum will keep you at the speed you want. because the management usually cuts all fuel when in gear but 0 throttle. Err, thats what we're talking about Niall, keep up!  The injectors shut off if you're over about 1500rpm with no throttle.
 
 It'll be using no fuel at all at that point.
 
 
  (17-04-2013, 08:12 PM)callumcull Wrote:  But for the purpose to accurately work out fuel consumption, it would have to be 0MPG, rather than the 99999999.9999MPG the scanguage shows? Finally!
  Someone gets it lol. 
Ha, win!
	
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		 (17-04-2013, 08:15 PM)callumcull Wrote:  Do the injectors really cut off below 1500, the scanguage still displays 999.99 with no throttle under 1500? 
It might be down to like 1100rpm in the HDi, I never had a scanguage so couldn't say.
 
BUT if it goes down low enough to be governed then obviously it'll start using fuel again.
	 
		
	 
	
	
	
		
	Posts: 408 
	Threads: 40 
	Joined: Mar 2013
	
 Reputation: 
0 Location: Devon
 Car Model/Spec: Moonstone Ph3 GTi-6
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Yeah for sure! 
 Don't buy one, you'll stop being arsed to enter numbers in it every time you stop for fuel.
 
 On the other hand, it is very handy for reading and clearing fault codes and engine temps!!
 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		Nah I don't want a scanguage anyway lol.  And I can clear codes or read data with my fault code reader anyway.
 Fed up with the Vectra on borad computer though, the mpg is totally wrong!  So I've still gotta work it out manually anyway haha.  Shoulda stuck with the Golf, the mpg on that was max of 1mpg out either way!
 
		
	 
	
	
	
		
	Posts: 4,135 
	Threads: 78 
	Joined: Dec 2011
	
 Reputation: 
49 Location: Chichester 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		But it won't be using no fuel, just very little. So you will still have an 'MPG' figure. But, my point is, even if for arguments sake it was using NO fuel... it would be zero gallons per mile. You're still making progress, just not using any fuel...
	 
		
	 
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
	
		How will it be using fuel, wheres it going?  Yes the HP pump is still keeping pressure, but until the injector solenoid is operated it won't inject any fuel into the cylinder.  It doesn't need to, fuel is only there to keep the engine turning above its mechanical losses (800rpm say)....if you're above those losses with gravity, momentum and the wheels turning the engine (via the 'box obv) why would you need any fuel in there? 
But I still can't see how makes a difference whether its GPM or MPG.     I'll take you're word for that though.
	
		
	 
	
	
	
		
	Posts: 408 
	Threads: 40 
	Joined: Mar 2013
	
 Reputation: 
0 Location: Devon
 Car Model/Spec: Moonstone Ph3 GTi-6
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		 (17-04-2013, 08:33 PM)Toms306 Wrote:  How will it be using fuel, wheres it going?  Yes the HP pump is still keeping pressure, but until the injector solenoid is operated it won't inject any fuel into the cylinder.  It doesn't need to, fuel is only there to keep the engine turning above its mechanical losses (800rpm say)....if you're above those losses with gravity, momentum and the wheels turning the engine (via the 'box obv) why would you need any fuel in there?
 But I still can't see how makes a difference whether its GPM or MPG.
  I'll take you're word for that though. 
I'm with Tom on this!
	 
		
	 
	
	
	
		
	Posts: 10,864 
	Threads: 117 
	Joined: Dec 2011
	
 Reputation: 
119 Location: Southampton
 Car Model/Spec: 306 HDi and friends
 Thanks: 13Given 106 thank(s) in 106 post(s)
 
 
	
	
		It'll be using no fuel, that's right. But if it's using no fuel, it'll be getting infinite miles to the gallon, not 0.
 MPG = miles/gallons
 
 Anything divided by zero equals infinity.
 
		
	 
	
	
	
		
	Posts: 4,135 
	Threads: 78 
	Joined: Dec 2011
	
 Reputation: 
49 Location: Chichester 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		This^, thank you Alex. 
 I don't know the ins-and-outs of the modern diesel engine, thought it must be using a small amount of fuel hence there would be a figure... but yeah, that's what I was meaning.
 
		
	 
	
	
	
		
	Posts: 19,854 
	Threads: 581 
	Joined: Dec 2011
	
 Reputation: 
195 Location: Bournemouth
 Car Model/Spec: Supercharged 306 GTi6
       Thanks: 36Given 82 thank(s) in 78 post(s)
 
 
	
	
		Tbh this is a bit of a silly argument anyway because the MPG displays in even the most modern cars dont take a lot of things into account like idling at a stand still or stop start.
	 
Team Eaton
 
 1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
 
 
		
	 
	
	
	
		
	Posts: 4,135 
	Threads: 78 
	Joined: Dec 2011
	
 Reputation: 
49 Location: Chichester 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Mine was more an argument of common sense than anything
	 
		
	 
	
	
	
		
	Posts: 19,854 
	Threads: 581 
	Joined: Dec 2011
	
 Reputation: 
195 Location: Bournemouth
 Car Model/Spec: Supercharged 306 GTi6
       Thanks: 36Given 82 thank(s) in 78 post(s)
 
 
	
	
		 (17-04-2013, 09:15 PM)Curt Wrote:  Mine was more an argument of common sense than anything 
Thats true but then again toms involved so i give it another 8 posts before it is about mpg and not if coasting is infinite mpg or 0 mpg lol
	 
Team Eaton
 
 1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
 
 
		
	 
	
	
	
		
	Posts: 4,135 
	Threads: 78 
	Joined: Dec 2011
	
 Reputation: 
49 Location: Chichester 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
	
		
	Posts: 782 
	Threads: 18 
	Joined: Jan 2012
	
 Reputation: 
3 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Toms floating down bypasses in neutral videoing his mpg gauge as we speak.....
	 
		
	 
	
	
	
		
	Posts: 4,135 
	Threads: 78 
	Joined: Dec 2011
	
 Reputation: 
49 Location: Chichester 
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		No no no, in gear, he'll tell you off for that   
		
	 
	
	
	
		
	Posts: 65 
	Threads: 9 
	Joined: Feb 2013
	
 Location: bedfordshire
 Car Model/Spec: 306 hdi
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		New astra I had said 0.7 gal/hr when idling, sitting in traffic ect. But if accelerating would go to mpg. so it would be 0 mpg when idling or coasting ect,  even though you could travel 2 miles coasting,
 So in theory if you travelled at 60mph and coasted 60 miles you would do 86mpg roughly on that astra.
 
		
	 |