Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
26-12-2012, 09:41 PM
(This post was last modified: 06-01-2013, 02:13 PM by Chris.)
Right the clutch has just gone on the 6 and I cba putting a new one in so I'll be breaking it for parts.
The car is imaculate bar the bumpers and a small dent in the n/s wing.
All parts will be avalible.
Interior
Almost mint seats, bought of dum dum and used for 2 weeks - £130
Ph 3 Dials 126k - £20
Door cards - £20
Rear door cards - £20
Engine and running gear;
126k engine with loads of history. Full head rebuild with 16 new valves and belts at 106k with receipts, runs perfect and have been using it for the last 2 weeks with no issues - £350
Gearbox good condition no crunches or wines - £50
Hubs, good bearings believe to be 18mm - £20 each
Struts working order - £20
Beam and brakes
Cyclones
Body pannels/shell
Shell in very tidy condition 99 on a T can do a deal with all panels etc if wanted. Bare shell and dash - £60
Doors, straight with a couple of car park dents - £40 each
Drivers wing vgc - £25
Front bumper, ok condition small hole on the lower o/s - £20
Fogs vgc - £30
Headlights vgc need to check brackets - £50 if all brackets intact - £40 if lowers are broke.
Rear bumper, scuffed corners - £10
Skirts, vgc £30
Boot vgc with spoiler ph3 item
Bonnet vgc no dents or scratches again ph3
Rub Strips
Mirrors - £30 pair
![[Image: sig.jpg]](http://i89.photobucket.com/albums/k220/c_j_m/sig.jpg)
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Pics of the bonnet? Mine has a big scratch on it.
Posts: 8,423
Threads: 171
Joined: Dec 2011
Reputation:
46
Location: Portsmouth
Car Model/Spec: Black 3dr Dturbo
And a pic of the scuffs on the rear bumper?
Posts: 670
Threads: 80
Joined: Dec 2011
Reputation:
10
Location: the petrol station
Standard exhaust?
![[Image: sigjpg.jpg]](http://i44.photobucket.com/albums/f32/cassandra--gemini/sigjpg.jpg)
Serious.
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Phill ill grab you some when I go get the car from my mates.
Not got any exhaust for the car atall.
Posts: 1,776
Threads: 82
Joined: Jan 2012
Reputation:
14
Location: Droitwich, Worcestershire
Car Model/Spec: P0XY Ph2 Dtub 5dr
Hmm really tempted by the bonnet but with fuel there and back it'll work out at £90 unless you know anyone coming up this way?
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
You know it's worth it. Can bring it to ace in a couple of weeks if you're heading down?
Posts: 1,498
Threads: 155
Joined: Dec 2011
Reputation:
11
Location: Norfolk/Wiltshire
Car Model/Spec: Bianca DTurbo
Any updates mate?
![[Image: edit2_zpsbe60b3ca.jpg]](http://i1242.photobucket.com/albums/gg530/DJMowle5677/edit2_zpsbe60b3ca.jpg)
Team derv FLAME and CONROD spitters
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Yea, will be ready within the week.
Posts: 8,423
Threads: 171
Joined: Dec 2011
Reputation:
46
Location: Portsmouth
Car Model/Spec: Black 3dr Dturbo
Don't worry about the bumper pic for me dude. Sources one now
Posts: 1,776
Threads: 82
Joined: Jan 2012
Reputation:
14
Location: Droitwich, Worcestershire
Car Model/Spec: P0XY Ph2 Dtub 5dr
Doubt I'll be going to ace bud - what about anyone going to milkmans?
Posts: 1,498
Threads: 155
Joined: Dec 2011
Reputation:
11
Location: Norfolk/Wiltshire
Car Model/Spec: Bianca DTurbo
I can help next week if you need it bud
Team derv FLAME and CONROD spitters
Posts: 1,776
Threads: 82
Joined: Jan 2012
Reputation:
14
Location: Droitwich, Worcestershire
Car Model/Spec: P0XY Ph2 Dtub 5dr
01-01-2013, 09:26 PM
(This post was last modified: 01-01-2013, 09:36 PM by ash240970.)
Yes please David - there's a good drink/ fuel money in it for you if you don't mind a bit of a detour 
Chris - I'll take the bonnet then if its as good as you say - pm sent thanks
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Pics of the car here.
http://www.306gti6.com/classifieds/viewa...php?id=284
Parts sold
Bonnet
Beam and brakes
Rub strips
Mirror caps
Boot
Prov sold
Doors, Will have another pair to be striped for motors, handles etc though.
Front bumpler
Posts: 4,566
Threads: 102
Joined: Dec 2011
Reputation:
9
Location: Sunderland
have you got a phase3 light stalk for sale? mines going on the blink.
Posts: 640
Threads: 23
Joined: Jul 2012
Reputation:
1
How bad are the scuffs on the rear bumper?
Any better pics of it? And Would you post it?
Might need a ph2 drivers door loom and switch aswell?
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Stalk £15 posted
Can get you some tomorrow Dan, and I can post it for £20 all in.
May have a door loom from a dtub (no leccy mirrors) do have a switch too.
Posts: 640
Threads: 23
Joined: Jul 2012
Reputation:
1
Yea sounds good, sort me a couple of pics, if everything is ok, I'll have it.
It needs to be from a ph2 with leccy mirrors, I want to put them in my dtub and have the temp gauge work.
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Ah, the doors are most likely going to a mate complete, if not i'll have a loom.
Posts: 640
Threads: 23
Joined: Jul 2012
Reputation:
1
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Wheels sold also, car already coming apart atm.
So most bits ready to post ASAP.
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
hi chap...sorry to hijack ya thread...I been PM'ing you on .net regarding the 15" steel wheels...can you PM me on here about them?? Would like to pick up next week if poss
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Totaly forgot bout them, pming you back now
Posts: 640
Threads: 23
Joined: Jul 2012
Reputation:
1
I'll have a think about it dude.
You got any wheels left?
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
Got a set of clones with tyres 6mm ish all round.
3 wheels in vgc the other has corrosion under the paint.
After £120 for them.
Posts: 640
Threads: 23
Joined: Jul 2012
Reputation:
1
What size tyres?
Could do a deal on them with the brocks and the bumper? But I doubt your willing to travel this far to Doncaster.
Posts: 5,203
Threads: 110
Joined: Jan 2012
Reputation:
20
Location: Devon
Car Model/Spec: Estate, DT, GTI6 and 205
Do you still have the tailgate?
Posts: 1,737
Threads: 189
Joined: Dec 2011
Reputation:
10
Location: Salisbury/Andover
Car Model/Spec: E39 ACS 535i
55's, Will have to google map it and see how far it is. But yea deffo interested.
Anything else you need/want?
Posts: 640
Threads: 23
Joined: Jul 2012
Reputation:
1
Just the wheels and bumper fella, going to stick them on the dturbo to sell.
|
![[Image: Eq4gGTq.png]](http://i.imgur.com/Eq4gGTq.png)
![[Image: IMG_20130925_181339_zps95df48fa.jpg]](http://i727.photobucket.com/albums/ww278/4WayDiablo/IMG_20130925_181339_zps95df48fa.jpg)
![[Image: 704e7db1.jpg]](http://i72.photobucket.com/albums/i162/birk69/704e7db1.jpg)
![[Image: 59D476E3-9176-4EDE-8E13-0733F8313ABE-178...D85878.jpg]](http://i89.photobucket.com/albums/k220/c_j_m/59D476E3-9176-4EDE-8E13-0733F8313ABE-1788-0000012986D85878.jpg)
![[Image: 4A0BB972-F267-4409-AF3C-21B48240F2B4-178...3A4343.jpg]](http://i89.photobucket.com/albums/k220/c_j_m/4A0BB972-F267-4409-AF3C-21B48240F2B4-1788-00000129933A4343.jpg)
![[Image: 72AF1DC2-FDB5-44E8-8D11-E21707DBE282-178...BAA034.jpg]](http://i89.photobucket.com/albums/k220/c_j_m/72AF1DC2-FDB5-44E8-8D11-E21707DBE282-1788-000001299DBAA034.jpg)
