jammapic's XUD 306 DTurbo Track Car

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
jammapic's XUD 306 DTurbo Track Car
Yea I know how that feels. I have come close recently, and last year when I did not have the car for 4 months. You might regret this though, so give it a few more thoughts mate. Sit down and think it though cos the build and car will be amazing once finished.

Could be a 306 that will have an engine to last, that has decent power. Unlike all the other ones that break.
Reply
Thanks given by:
Hi mate, I've been looking through the FMI thread and saw your engine bay pics, and was just wondering about your inlet manifold. Is it a standard 306 Td item or is it fabricated.
Reason I ask is I have a ZX which comes with the top mounted intercooler and I want to change to a FMI. If this is a standard item it will be better for me than reworking a fabricated one I have sourced.
Great projects by the way, I will be reading them in full to gain some ideas for tweaking mine as the power outputs are very intriguing
Reply
Thanks given by:
gutted to see this come to an end, if you really are though i'd be interested in the FMIC setup if you could PM me a price please . .Sad
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
Are you breaking the whole car?
Reply
Thanks given by:
Txt me with what u want for bottom end? Im devastated this has happend mate, may be interested in a lot more so let me know when your free n il come up n make some offers
[Image: J5hxCcC.jpg]
Reply
Thanks given by:
(27-10-2012, 06:21 PM)CJ_Derv Wrote: Txt me with what u want for bottom end? Im devastated this has happend mate, may be interested in a lot more so let me know when your free n il come up n make some offers

Texted you mate.

Unfortunately it's come to an end. All the suspension, cage, seats etc has been swapped over to my new (stripped) car ready for the new project!

JP
JP
Reply
Thanks given by:
new project?
Reply
Thanks given by:
306 gti6 turbo project then?
Reply
Thanks given by:
GT25 hybrid GTI6, 2.2 block with knife edged crank and low comp pistons?

DO. IT.
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
He's selling the gt25 so we can only hope it will be replaced with a GT28RS?
Reply
Thanks given by:
OK - Little list of bits for sale:

Fuel Pump with lazer cut pin, modified internals (I made 209.9hp on this) £120
GT25 Direct Bolt on Turbo (cost £750 from Turbo Dynamics, still has 18 months warranty) £300
SP Engineering Intercooler, all pipes and Xantia inlet mani £180
4 core high efficiency radiator. I had this custom made (cost £300) £100
Huge Green Cotton Air filter with custom pipework £30
HKS Electronic Boost controller (cost me £180) £60
2.25" Stainless Exhaust with oval tip from Longlife systems with lifetime warranty £200
Rear brace / Harness bar £40

All first come first served as it needs to be gone ASAP.

JP
JP
Reply
Thanks given by:
What size pipping is with the intercooler?
Reply
Thanks given by:
shame about stripping this looked amazing. dibs on wheels if you selling them?
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
They going on his other car
Reply
Thanks given by:
(28-10-2012, 11:06 AM)Tyronnster Wrote: They going on his other car
Sad
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
bad times Sad going to miss seeing this!
Reply
Thanks given by:
OK, so the turbo, radiator, intake pipes, fuel pump and electronic boost controller have now sold.

I've got the exhaust and intercooler still sat here:

[Image: DSCF8547.jpg]

[Image: DSCF8545.jpg]

[Image: DSCF8546.jpg]

[Image: DSCF8548.jpg]

JP
JP
Reply
Thanks given by:
Do I see a set of cyclones
Reply
Thanks given by:
Yeah. They are pretty much mint and have brand new tyres, but I need wheels to send the xud to the scrapers.

Also got a hdi box I found in the shed, and cg 4 paddle clutch.

JP
JP
Reply
Thanks given by:
Mate as your interested in a box off me could we meet halfway one night and do a swap

Your HDi box and clones for what you wanted off me plus the shit wheels on my new car?
Reply
Thanks given by:
so your not throwing the clutch? If not I will take it if you can post?
GT2052s DTurbo
OEM+ HDI Estate
Project thread
Reply
Thanks given by:
Jamma that exhaust would sound the bollox on the 6 (I know my straight thru does Big Grin ) but the track owners aren't always nice about it lol
Reply
Thanks given by:
Pictures of radiator?
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
[Image: wallye-gtd.JPG?raw=1]
HDi Owner for 200k/9 years
Reply
Thanks given by:
Sold I'm afraid...
JP
Reply
Thanks given by:
I think the shell would make a lovely plant pot/garden table you know would be a waste to send pierre to the scrap yard Sad

Cant believe yohr scrappin the clones i may just have to swap yohr wheel nuts with my extra long ones :p
[Image: J5hxCcC.jpg]
Reply
Thanks given by:
Dont worry CJ, I've spoken to him and saved the clones.
Reply
Thanks given by:
interested in the exhaust is it a straight fit and could you post ?
Reply
Thanks given by:
Straight fit to an xud 306 yes.

I could courier it but that would be at your cost.
JP
Reply
Thanks given by:
would u take any less for the zorst ?
Reply
Thanks given by:
Depends how much less.

If you come and collect it, and save me the hassle then probably - yes.
JP
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)