Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
WHY DO YOU DO THIS THE WEEK I put tHE DEPOSIT DOWN ON A HOUSE!!!!!!! lol,
I also could be interested would they be able to get some mega ARBs made up cheap for this group buy?
Member of 99% warning or your nothing club!
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
[quote='sean-306' pid='148976' dateline='1351181023']
Ive put 23mm... But could someone explain what differences thicker bars will implicateon the ride/handling please?
Just think of them as springs like you have at the front. They are rated by weight (as in first post) and get stiffer as they get wider (ooh!). Basically it takes more force to twist a thicker one in the same way it takes more force to compress a spring. Best I can explain hope that helps!
Posts: 3,524
Threads: 178
Joined: Jun 2012
Reputation:
28
Location: Odiham/Basingstoke/W-s-M
Car Model/Spec: HDi!
Thanks: 0
Given 1 thank(s) in 1 post(s)
So the thicker it is the harder it is.. ooh err
What would be good as a quick car setup? standard hdi is 21 iirc (165lb/inch) so 23mm @ 235lb/inch should be 70% harder?
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
Standard HDi estate is 21mm, hatchback is 20mm same as the GTI6.
I've spoke to them again, ARB's are £90 for up to 25mm, £100 for over 25mm if ordered as part of the group buy.
30mm ARB for £100? Bargain.
Posts: 3,524
Threads: 178
Joined: Jun 2012
Reputation:
28
Location: Odiham/Basingstoke/W-s-M
Car Model/Spec: HDi!
Thanks: 0
Given 1 thank(s) in 1 post(s)
Damn you! Now its gonna cost another 100 quid!!
Will this not make the back end awfully stiff and wanting to over take the now wobbly front end?
Especially from a personal opinion and with ordering the bakerbm rear mounts...
Im thinking im going to have a very stiff rear end snigger!
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
Make the rear as stiff as you want, but generally the stiffer the rear is compared to the front, the more oversteery it'll be.
What kind of setup do you want? Fast road/track anything up to 23mm torsion bars and 30mm ARB will be a hoot, more than that is hardcore track use really
Posts: 3,984
Threads: 138
Joined: Dec 2011
Reputation:
72
Location: Milford, Surrey
Car Model/Spec: Mincebus
Thanks: 0
Given 0 thank(s) in 0 post(s)
Chris what size are the hybrid arbs a well known Peugeot tuning parts supplier sell?
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6- 6 - SOLD!
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
Hybrids are 28.5mm roughly, to play it safe i'd plump for a 28mm one as 29mm is awful snug in the trailing arms..
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Spoox motorsport sell 28.something tapered down to 25.something at the other end. This is advertised as the thickest arb you can fit in the standard beam tube.. so 30mm wouldn't fit
Posts: 3,524
Threads: 178
Joined: Jun 2012
Reputation:
28
Location: Odiham/Basingstoke/W-s-M
Car Model/Spec: HDi!
Thanks: 0
Given 1 thank(s) in 1 post(s)
I want fast road...Something i can really throw around and pedal whilst still being in reasonable control... ATM the back end really does feel wobbly in those situations currently... im glad ive got good tyres on the front... Although, having mix match tyres on the rear could also be a problem...
Way future (after afghan) plans are new high spec coilovers and decent new bushes at the front... so beefing up the arse end isnt really a major worry at this point.
Are you saying a 30mm wouldnt fit in the trailing arms?
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
30mm needs the railing arms pins to be machined. According to spoox, 28.5mm one end and 25.4mm at the other is the biggest you'll fit.
AKA the "hybrid" ARB
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Ha I like how you've put you want to be in 'reasonable' control! I'd rather be in full control lol but everyone's different! I don't think a 30mm anti roll bar would fit atall. Have a look at the one spoox motorsport sell that's supposed to be the largest you can get without modifying the beam
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
Sean if you're wanting something a bit stiffer than the usual "uprated suspension" feel then 22 or 23mm is what you want. I'm only going for a 24mm set as I need the back as rigid as possible given the ride height, plus I have something like 400lb springs at the front!
Posts: 3,524
Threads: 178
Joined: Jun 2012
Reputation:
28
Location: Odiham/Basingstoke/W-s-M
Car Model/Spec: HDi!
Thanks: 0
Given 1 thank(s) in 1 post(s)
So the biggest "standard" arb possible is a 25mm... realistically speaking
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Beat me to it again! Darn phone typing takes ages!
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
Realistically sean, yes, the gti one is either 23 or 24mm depending on the year.
Posts: 3,984
Threads: 138
Joined: Dec 2011
Reputation:
72
Location: Milford, Surrey
Car Model/Spec: Mincebus
Thanks: 0
Given 0 thank(s) in 0 post(s)
Right now I'm confused.
So if we order a 28mm arb, I'd it going to be made to fit similarly to the hybrid arbs? Or are we gonna have to deal with that when we get hold of them?
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6- 6 - SOLD!
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Posts: 3,524
Threads: 178
Joined: Jun 2012
Reputation:
28
Location: Odiham/Basingstoke/W-s-M
Car Model/Spec: HDi!
Thanks: 0
Given 1 thank(s) in 1 post(s)
25-10-2012, 06:15 PM
(This post was last modified: 25-10-2012, 06:16 PM by Just Sean.)
(25-10-2012, 06:10 PM)Ben Wrote: Ha I like how you've put you want to be in 'reasonable' control! I'd rather be in full control lol but everyone's different! I don't think a 30mm anti roll bar would fit atall. Have a look at the one spoox motorsport sell that's supposed to be the largest you can get without modifying the beam
Lol!! Still want to be able to put in a bit of correction and feel like im driving the car and the car isnt driving me... if you no what i mean...
the way i see it is if the car wants to let go i still want to be able to have enough talent to save it... without "reasonably controlled" practice... how am i supposed to understand how the car will react to a given situation and have the required talent/skill/luck/understanding (delete as neccasary) to fix the "situation"?
(25-10-2012, 06:15 PM)Ed Doe Wrote: Right now I'm confused.
So if we order a 28mm arb, I'd it going to be made to fit similarly to the hybrid arbs? Or are we gonna have to deal with that when we get hold of them?
If i understand right... a 28mm wont fit... the max that will fit without further mods is a 25mm. thats why they give the "hybrid arb" tapered ends...
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
Ed, the hybrid ARB i've just been told is a flat rate of £125 as part of the group buy. This is the one with different diameters at each end. The price quoted before is for a fixed length ARB which will need some work to fit if going over 25mm fixed diameter. The hybrid ARB requires no modification to fit.
Posts: 3,984
Threads: 138
Joined: Dec 2011
Reputation:
72
Location: Milford, Surrey
Car Model/Spec: Mincebus
Thanks: 0
Given 0 thank(s) in 0 post(s)
f*ck f*ck f*ck so tempted! Will you put some compbrake stickorrrz on it for me?
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6- 6 - SOLD!
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
I'll see what I can do Ed
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
If i didnt already have a hybrid arb and 21mm tb's i would have them at them prices
Posts: 263
Threads: 23
Joined: Oct 2012
Reputation:
3
Location: Rotherham
Car Model/Spec: High Boost Rallye
Thanks: 5
Given 1 thank(s) in 1 post(s)
Saw this on 306gti6 and I've had some droplinks of you before Mr Pellowe, so I'm in lol
1. cwspellowe - 306 24mm bars
2. Jonny81191- 306 24mm bars
3. Niall - 306 23mm bars (we WILL get 5 names so don't feel like a Jew)
4. c.gerrard - 306 size TBC
5. Matt - 23mm bars
6. lisa306-23mm..TBC
7. Jack TBC
8. Grant 306, 24mm aslong as we get more than 5 actually go through with this as I'm a tight lady garden
9. Sean 306 23mm
10. luke306rallye - 306 23mm bars (unless 24mm fit without removing?)
Posts: 4,135
Threads: 78
Joined: Dec 2011
Reputation:
49
Location: Chichester
Thanks: 0
Given 0 thank(s) in 0 post(s)
Damn it, why is there so much I want to buy at the moment!
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
Aaaahhhhh must find money ASAP!!!!!!!
What about front ARBs. So if i order some TB's and a ARB do i get combined postage
Member of 99% warning or your nothing club!
Posts: 1,046
Threads: 71
Joined: May 2012
Reputation:
4
Location: cornwall
Car Model/Spec: 205 dt
Thanks: 0
Given 0 thank(s) in 0 post(s)
(25-10-2012, 06:33 PM)Curt Wrote: Damn it, why is there so much I want to buy at the moment!
exactly my thoughts, new it was a bad idea buying another 306, I just want to spend money on it!!
Midnightclub Wrote:All the cool kids have ph 2 Nile 6's!
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
Postage is currently a weird subject. He wants £25 a set outside the group buy, or £10 a set for 5 sets posted. That's to me though, but i'll be able to post them on to you for less than the £15 difference.
As for combining everything, if it's all shipped to me as one order I can work on postage from that. All in though you're probably talking £20-£25 anyway for postage.
Posts: 3,524
Threads: 178
Joined: Jun 2012
Reputation:
28
Location: Odiham/Basingstoke/W-s-M
Car Model/Spec: HDi!
Thanks: 0
Given 1 thank(s) in 1 post(s)
Are you coming/going to the xmas meet?
Posts: 1,046
Threads: 71
Joined: May 2012
Reputation:
4
Location: cornwall
Car Model/Spec: 205 dt
Thanks: 0
Given 0 thank(s) in 0 post(s)
you reckon you'd be bothered to sort another group buy in a month or so? as my funds are shit right now
Midnightclub Wrote:All the cool kids have ph 2 Nile 6's!
Posts: 4,883
Threads: 198
Joined: Jan 2012
Reputation:
135
Location: Not near you
Thanks: 0
Given 0 thank(s) in 0 post(s)
Joe depends how hard work this is, if this goes well I could do another, i'm just not making anything from this so if it's hassle I won't bother again
And no i won't be at the xmas meet i'm afraid
|