11-01-2012, 12:40 PM
Are the the same? Other than the rubstrips?
![[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]](http://i35.photobucket.com/albums/d196/mattbush/20A1806D-891D-40FB-BD52-AD519177A607-7340-0000058F46391753.jpg)
TEAM CONROD SHITTING RALLYE!
306oc - Peugeot 306 Owners Club & Forum
›
306 Repairs & Mods
›
Interior, Exterior, ICE
Ph1 and ph3 doors
Ph1 and ph3 doors
|
Ph1 and ph3 doors
|
 
11-01-2012, 12:44 PM
No. The door card mounts are different but can be changed to fit
11-01-2012, 12:53 PM
Rubstrips have the same holes, as springs said, only difference is how the door cars mount. Not that you can get moonstone in Ph1
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam ![[Image: connorsig.jpg]](http://www.306oc.co.uk/forum/images/uploads/connorsig.jpg)
11-01-2012, 01:03 PM
My friend has ph1 sigma doors, with s16 door cards, which I planned on fitting to mine, but as I may have broke my drivers door today, just going to spray the ph1 doors and fit them lol
TEAM CONROD SHITTING RALLYE! 
11-01-2012, 01:10 PM
1. how did you break the door?
2. arent the rubstrip indents taller as the ph1 trim is taller?
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD!  '08 LY Renault Megane RS 230 F1 Team R26 - GONE '56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
11-01-2012, 01:17 PM
Yes the trim is very different, but the holes are the same (except the wings, see pics of my Ph1.3 to prove this...)
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam 
11-01-2012, 05:27 PM
basicaly yes, with the door you already as a donner it can be done very easily
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://s1038.photobucket.com/user/167gti8/media/DSC_0190-Copy_zpsf093f84d.jpg.html) Member of 99% warning or your nothing club! 
11-01-2012, 06:07 PM
Connor Wrote:Yes the trim is very different, but the holes are the same (except the wings, see pics of my Ph1.3 to prove this...) +1 Superglue ftw
![[Image: signature_zps1a02ba79.jpg]](http://s1128.photobucket.com/user/martypellowe/media/signature_zps1a02ba79.jpg.html) 
11-01-2012, 06:43 PM
arn't the rub strips width different dependent on the model - i know between my 1.4 and dturbo they were different...
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Posts: 4,605
Threads: 90 Joined: Dec 2011 Reputation: 54 Location: Cornwall Car Model/Spec: 1996 306 DT M-TDI/16 
Thanks: 0
Given 20 thank(s) in 18 post(s)
11-01-2012, 06:48 PM
Door panels are identical regardless of rub strips, only change as said is the mounts, but 5 mins job to change with drill and rivots
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia | ![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
11-01-2012, 06:56 PM
darrenjlobb Wrote:Door panels are identical regardless of rub strips, only change as said is the mounts, but 5 mins job to change with drill and rivots hm weird why my strips were different? :think: i might get a pic of it... i thought they were the same until phil (4waydiablo) pointed it out to me i think, up at cheddar.
Diablo Hdi Dturbo and 205 1.9 project - it lives!
11-01-2012, 07:05 PM
The actual trims are different ginge, but the holes they go into are not
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
11-01-2012, 07:59 PM
darrenjlobb Wrote:Door panels are identical regardless of rub strips, only change as said is the mounts, but 5 mins job to change with drill and rivots Mounts inside or out? Door card or sidestrips? If its the door card I don't mind as I'll use ph1 door cards lol TEAM CONROD SHITTING RALLYE!
11-01-2012, 08:04 PM
Are my posts invisible? lol
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
11-01-2012, 08:55 PM
Right so the gap for rub strips are different sizes :/ but hinges are the same
TEAM CONROD SHITTING RALLYE!
11-01-2012, 08:56 PM
No... the door are EXACTLY the same, EXCEPT from the mounting points for the door cards
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
11-01-2012, 09:48 PM
Okay thats awesome, cheers guys. Just take me a little longer to get as I'm thick haha
TEAM CONROD SHITTING RALLYE!
11-01-2012, 10:26 PM
Connor Wrote:No... the door are EXACTLY the same, EXCEPT from the mounting points for the door cards Ok, im going to get a picture of this tomorow and show you the differnce in sizes of my rubstrips on the OUTSIDE of my car....
Diablo Hdi Dturbo and 205 1.9 project - it lives!
12-01-2012, 12:44 AM
Omg ginge... I know the rub strips are different, but the holes you push them into are the same...
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
12-01-2012, 11:05 AM
ginge191 Wrote:arn't the rub strips width different dependent on the model - i know between my 1.4 and dturbo they were different... Im talking about the ACTUAL strips - as i said in my first post - THE WIDTHS CAN BE DIFFERENT ... (as in the width of the ACTUAL strips) So when he's looking for a new door, if he needs the same width to be aware of this... and a picture to tell you what i was on about.. ![[Image: q9zdj.jpg]](http://i.imgur.com/q9zdj.jpg)
Diablo Hdi Dturbo and 205 1.9 project - it lives!
12-01-2012, 12:07 PM
No ginge, he just has to take the rub strip off his current door and fit to the new door... THE HOLES ARE THE SAME... I never said the rub strips are the same...
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam |
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)