Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Non-tapping Black Gti-6
#61
(01-08-2012, 03:34 PM)Ed Doe Wrote:
(01-08-2012, 03:25 PM)vlj Wrote:
(01-08-2012, 03:24 PM)Ed Doe Wrote: Come on then Vaughan, how did it get on?!?!?!?!

It's tomorrow morning! I'll tell you as soon as I know. All I've done is change oil and clean my lambda sensor. It so nearly passed on the last try so this has got to work

Just start it,run it up so it's warm, then bring the revs up to 4k and sit them there for a bit (make sure the fans work beforehand, or disconnect the 'temperature plug' to override the fan operation) just to make sure that cat is roasting hot!! Then take it down Smile

Which one is that? There's the two on the right of the manifold but wasn't sure which was which Haha. I'll just unplug them both. Fingers crossed Sad if not I'll be going to Lynx...
#62
It's the middle one. I'll try and find a pic on the 6 forum for you
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
#63
[Image: 6d9e306c-2dc9-48ac.jpg]

Represent!

Just dropped the car off for its re-test, and clearly out of sympathy the guy I've known for ages said he'll fix the remaining exhaust leaks and if that fails do something else to get it through Smile
#64
Bad news, apparently I'm not very good at fixing exhaust leaks. Old vs new[Image: 1f55df71-66a9-fb5a.jpg]
#65
Not a particularly exciting update. I've been working like crazy so I haven't had any time to do anything.
Fit the standard exhaust back to the car for now until I can sort MOT. Don't seem to be any leaks in the system now so it could have been down to fitting, but that doesn't matter now.
[Image: 20120802_173643.jpg]

Fitted to the car
[Image: 20120802_175031.jpg]

Temporary exhaust hangers!
[Image: 20120802_175043.jpg]

As I have to replace my rear discs & pads for the MOT - I figured it would be an ideal time to paint the rear calipers properly!

[Image: 20120802_185705.jpg]
[Image: 20120802_181849.jpg]

Temporary handbrake
[Image: 20120802_191957.jpg]

[Image: 20120802_203803.jpg]
[Image: 20120802_205319.jpg]
[Image: 2012-08-02_21-45-12_HDR.jpg]

Also got some bits to fit this week which will keep me busy:
-Coilovers
-TRS strap
-K&N win cone
-Oil cooler (not sure if I'll fit this yet)
-Braided brake lines as they need replacing for MOT anyway

Will get pictures up when I have them. Cheers!
#66
Looks good mate, how much do you want for the exhaust.

this is what you need for the sticky stuff on the back of the car BTW http://www.ebay.co.uk/itm/Stripe-Removal...1175wt_698
#67
(06-08-2012, 06:39 PM)Dum-Dum Wrote: Looks good mate, how much do you want for the exhaust.

this is what you need for the sticky stuff on the back of the car BTW http://www.ebay.co.uk/itm/Stripe-Removal...1175wt_698

Will give you a text - and cheers ordering now Smile
#68
Just FYI, your exhaust should fail a mot if it's held up by cable ties but if you have a nice tester, he might let it go.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#69
I have an exhaust rubber mount in the car you can have for the MOT if you need it Smile
#70
(06-08-2012, 08:49 PM)Niall Wrote: Just FYI, your exhaust should fail a mot if it's held up by cable ties but if you have a nice tester, he might let it go.

I have a hanger now, the cable tie was just there to keep it at least looking decent on my driveway!
#71
Good good Smile
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#72
my xsi passed with cable ties hahaha
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
#73
Ah so this is you're car (im the chap who picked up the clones)

Car looked mint pal, beside it needed to be hit with the lowering stick, it looks a tidy piece!
Phaes 1 GTI 6  -  Onyx Black
#74
Today's activities include:

[Image: 20120807_133236.jpg]
[Image: 20120807_134723.jpg]
[Image: 20120807_135005.jpg]
#75
Need Samass yellow lights too finish that off haha
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
#76
yellow badge looks awesome with the fogs!

i reckon, yellow masks. altho i also reckon my yellow headlights would look sick on that...
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
#77
(16-07-2012, 06:11 PM)Fozzy Wrote: think you need a Decat for that seat

Still haven't got around to the decat [Image: 56a1e3b5-a65f-dce6.jpg]
#78
Rofl

Look forward to seeing this on Sat bud, looks tidy. Particularly like the yellow accents, some mong on here has done the whole front end, looks awful...
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



#79
true that, some douche has gone totally overboard. next he'll be wanting a yellow exhaust tip!
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
#80
Wellie exhaust tip? Would have to be a douche to rock that
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
#81
This is in for the final time at the garage at the moment and fingers crossed will be out this afternoon.
Also winning some winning wheels on ebay with 12 hours left
#82
ninja wheels. They look fapping epic. I hope you win them as they are going to look heroic!
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
#83
[Image: 56889ef2-1e62-dd7c.jpg]

Only picture I got from the weekend, car went through MOT very last minute, so here it is with Jimmys rallye!
Absolutely loving it on the road, updates to come this week Smile
#84
Heater matrix time! Wasn't so bad..
[Image: 20120814_145042.jpg]
[Image: 20120814_143342.jpg]
[Image: 20120814_154725.jpg]
[Image: 20120814_151418.jpg]
[Image: 20120814_151812.jpg]

Oops
[Image: 20120814_154805.jpg]

[Image: 20120814_174154.jpg]
[Image: 20120814_175552.jpg]
#85
Good effort! How long did it take? I love that you say you're terrible with a set of spanners but have managed to put back together your car and do things like the heater matrix which a lot of mechanics would frown at.
#86
(14-08-2012, 05:16 PM)Scott Wrote: Good effort! How long did it take? I love that you say you're terrible with a set of spanners but have managed to put back together your car and do things like the heater matrix which a lot of mechanics would frown at.

Hour and a half! Still doesn't mean I'm any good, I had to get Jimmy to fit my cone haha!

Edit: also, crappy quality but it sounds so lovely
http://vid1162.photobucket.com/albums/q5...1short.mp4
#87
Liking the front end of this alot!! yellow bulbs in headlights????
#88
(15-08-2012, 11:48 AM)thethorne Wrote: Liking the front end of this alot!! yellow bulbs in headlights????

Cheers mate but the front end has changed a little bit over the weekend! [Image: 56a1e3b5-9041-857a.jpg]
#89
In these educational videos I:
- follow a black 306 for nearly 2 miles just so I can overtake him and show him how it's done
- show some twat with lexus rear lights how it's done.

Obviously keeping to national speed limit, and don't comment on gear changes.. :p

[Image: th_20120815_202522_001.jpg]

[Image: th_20120815_202522_002.jpg]
#90
Those gearchanges need some work... Tongue Sounds nice though Big Grin
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!


Forum Jump:


Users browsing this thread: 1 Guest(s)