Smooth HDi

[Choppin]

My new 306
2.0l 8v Hdi remapped by Remap Science to 120bhp,
Induction kit with air feed,
Hofman straight through with 3” sportex back box,
Gloss black engine cover,
AC compressor removed ready for FMIC (not fitted yet)
Compbrake quick shift,
GTi6 283mm drilled and grooved front breaks,
Drilled and grooved rear breaks,
600mm lowering springs with Bilstein shocks and adjustable drop links,
Rear torsion bar lowered to match with Bilstein shocks,
15” Wolfrace pro lites with 20mm Wolfrace hub centric spacers,
Phase 3 smooth bumper with rallye fog light blanks and GTi6 splitter,
Phase 2 smoothed boot and spoiler with popper on dash,
Smoothed bonnet and grill,
Phase 3 valeo black mask headlights,
Heko wind deflectors,
Everything colour coded except front splitter,
Cabriolet front leather seats and door cards,
GTi6 leather/alcantara rear seats,
Gloss black centre console,
White dials with blue lights and blue clock,
A and B pillers, astray, top glove box and rear view mirror housing covered in alcantara,
Think that’s everything at the moment, looking for new wheels, not sure if I should go the Peugeot style or BBS style yet and hopefully stage 2 for the engine soon ish lol
   
   
   
   
   

[kingy]

looks alright that dose. im with ya on the wheels. dont do the car justice. bbs would look the mutts nuts on that.

[Pete]

BBS FTW! Nice car aswell, remember having a good look at FCS.

[Choppin]

Was she actually on a stand @ the show? I didn't get the chance 2 go as was workin, yer thinking sum dirty dished bbs with sum camber would look lush, just gota find the cash, does any1 kno what offset I will need 2 get um 2 fit properly?

[puglove]

Was she actually on a stand @ the show? I didn't get the chance 2 go as was workin, yer thinking sum dirty dished bbs with sum camber would look lush, just gota find the cash, does any1 kno what offset I will need 2 get um 2 fit properly?

Indeed it was, it was also on stand at combe spring action day earlyer this year

[Poodle]

Really nice, like where you're taking this!

[ben87]

does look good,as said few things (personal preference) and would be complete.

get rid of silly motorbike nubmerplate on the front
change wheels (major let down)

May just be the angle pic but when you do FMIC that strut brace may be a bitch when you get the correct elbow

[Choppin]

Thanx mate, this is it, I personally like square plates, had them on my last 2 cars! Lol althoght looks a lot better without the plate, kinda want 2 mount it in the windscreen but don't want the attention from mr plod, yer the wheels r a big let down on the car, was lookin @ bbs wheels last night but not sure what offset 2 get,
Il take the strut brace off if it's not guna fit, would rather have the fmic than that lol is ther a guide on here 4 fitting 1 2 a HDi?

[puglove]

ET 0 on the rear
ET 5 or 10 on the front

will need for a 8j wheel 195 stretched tyre. Thats what i was going to go for anyway

[Choppin]

Spot on mate! Sold my scooby yesterday so got sum cash 2 get um now, just gota pic a style lol

[puglove]

Bbs rs reps all the way. Iv heard the dare ones arnt to bad quality for the money

[Midnightclub]

Haven't seen a set of BBS CH's on a 306 yet but they're awesome wheels

[Choppin]

Good shout mate! They r lush wheels but not sure if the come in the right stud patten il av a google lol

[DaveW]

Ive seen this car around wisbech but then not seen it for ages..

[Ben]

Looks really nice mate, looks in good nick as well

[Choppin]

To davew, that's coz she is hiding in kings Lynn now lol
To Ben, thanx mate, yer was a good find, mind u iv been searching 4 1 since new year lol

[Choppin]

sun was out and had a free house so thought i would sort the sound system out,
the previous owner had fitted a sub and some 6x9s but was running them off of the same amp! and the amp would over heat and switch its self off so needed sorting,
Ripped out all the original wireing and replaced it with new stuff, added my fli amp with my vibe 6x9s and left the old amp runing the sub, think i will replace the amp and sub soon as not really up to the job,
couple of pics of it nicely parked in the middle of the garden lol
   
   
   
and the finished job, not the nicest job but will do for now
   

[sam]

i have a smooth rear bumper in primer in my garage if you interested dude just needs painting

[cwspellowe]

ET0?

Pfft don't be a pussy. 9J and ET-5 ftw. All about the negative offset.

And the Dare wheels are actually ok. The lips aren't polished though, they're just shiny and lacquered. Would look smart if you polished them properly though.

[puglove]

ET0?

Pfft don't be a pussy. 9J and ET-5 ftw. All about the negative offset.

Only if your as mad as you dude


the dare wheels come in a 108x4 pcd and pretty much any off set you like,

I have enquiered myself, spent loads of time sorting out what i want size,ofset, tyres etc, then sold the car lol and changed direction

[Birk]

9s all round

[Choppin]

Sam- have u got any photos of the bumper? Have u just smoothed the bumper strips out n left the number plate recess?

---

9j!s f*ck off! Lol They would never fit under standard arches! Lol
Anyway think I'm guna b getin sum Cades Eros HS but the thing is I can't seen them in person round here, the only place that does wheels where I live is bloody halfords! Yer coz Im really guna spend £600+ on sum crapy ripspeed alloys! lol

[declantg]

Looks nice mate, but "600mm" lowering?

[Choppin]

Lol nice spot mate, think I may hav f*cked up ther lol

[Will_306_hdi]

Looks smart that.

[Choppin]

thought id do a lil update, been abit slack with the car as of work commitments
Anyway late last year i gave her a sevice, sort the gearbox mount and attempted to fit the FMIC, but got that flu bug that was goin around and gave up half way through. Wasnt happy with myself but as i was throwing up n alsorts thought id better stay in bed! lol got the service done, couldnt find the wright size engine mount which was doin my head in but its still holding so cant b that bad!! lol
Couple of photos
FMIC with all pipes n clamps
   
Some Random photos of her in bits
   
   
   
Wrong size engine mount
   
Test fit of FMIC
   
Then had the scary time of MOT!!! lol but she passed with no adviserys!!! Couldnt believe it!! lol
Thought id add some random snow photos
   
   
and i ran somthing ova the other day n it wiped my number plate off!! Chuffed lol
but does now mean i hav a normal one on n not a bike plate, think i prefer it now its on
   
   

[Matt]

Looks fapping epic

[samass]

God that's nice

[Choppin]

Thanx guys!!

[Aaron _d95]

sun was out and had a free house so thought i would sort the sound system out,
the previous owner had fitted a sub and some 6x9s but was running them off of the same amp! and the amp would over heat and switch its self off so needed sorting,
Ripped out all the original wireing and replaced it with new stuff, added my fli amp with my vibe 6x9s and left the old amp runing the sub, think i will replace the amp and sub soon as not really up to the job,
couple of pics of it nicely parked in the middle of the garden lol



and the finished job, not the nicest job but will do for now

What size are the speakers in the parcel shelf.