Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ash23's project lucy :) (pic heavy)
#91
true just a wee bit ive allready got a thick as hell gasket think is the thickest possible lol but still less stress on everything is good as its gona be a 300mile a week hack.
#92
yeh the difference between them is bugger all really, 1.36mm/1.52mm or something from thinnest to thickest. For ultimate reliability if your wanting to max out your pump/turbo when I would...
[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
#93
Dave Wrote:yeh the difference between them is bugger all really, 1.36mm/1.52mm or something from thinnest to thickest. For ultimate reliability if your wanting to max out your pump/turbo when I would...

yeah i think i will defo. plus they look sexy sat in a nice clean deck lol
#94
what do we think to the new lights?

one is directly connecte to a pipercross enclosed filter and the other side i am going to mout to oil cooler and put a standard grill back on Smile

[Image: 2012-06-02110446.jpg]
[Image: 2012-06-02181128.jpg]
[Image: 2012-06-02182039.jpg]
[Image: 2012-06-02182046.jpg]
[Image: 2012-06-02182057.jpg]
[Image: 2012-06-02110502.jpg]
#95
Looking good mate Smile any more news on your other engine
[Image: 5dd0e8e7-1.jpg]
Blaze XUD Dturbo
Soon To Be Stage 2..
#96
(02-06-2012, 07:18 PM)Louis123 Wrote: Looking good mate Smile any more news on your other engine


thanks matey Smile

well i picked the last part of the puzzle up this morning i told them id be there for around 12 but got a little excited and got there for half 8 lol

any way here is what i picked up. really good build quality very sturdy probs the best box ive seen in a long time Smile

[Image: 2012-06-15125751.jpg]
#97
[quote name='Nath140889' timestamp='1339797282' post='318097']




[Image: 2012-06-15125818.jpg]

[Image: 2012-06-15125836.jpg]

[Image: 2012-06-15125941.jpg]
#98
sneaky bar stool how much they set you back!
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
#99
(17-06-2012, 05:31 PM)Jenkosowls Wrote: sneaky bar stool how much they set you back!


haha i picked them up friday morning they was also at fcs to show some one Smile
and not as much as you maythink Tongue
last few buts turned up today

some heavy duty bigend bearings as used by the boosted "6" guys
[Image: 2012-06-28175544.jpg]

and a new genuine peugeot sump i picked up cheap Smile
[Image: 2012-06-28175413.jpg]

picked these up a week or two ago
[Image: 2012-06-20175352.jpg]
how much were the studs easy to get hold of? thinking of some myself at some point in the future
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
well been mega board today so the bosch got a clean up

[Image: 2012-07-08161508.jpg]

[Image: 2012-07-08161500.jpg]
Looks mint, spare bosch i see there! Wink
[Image: 5dd0e8e7-1.jpg]
Blaze XUD Dturbo
Soon To Be Stage 2..
Just a tart you are ash!
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Looking good Ash! how much did you pay for the shells?
[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
(08-07-2012, 05:29 PM)Louis123 Wrote: Looks mint, spare bosch i see there! Wink

it sure is could be yours for some ££ Tongue

(08-07-2012, 05:44 PM)Jenkosowls Wrote: Just a tart you are ash!


i know lol it will look pretty when on though Makeup

(08-07-2012, 05:46 PM)Dave Wrote: Looking good Ash!

cheers Dave.
scrap it lol
(08-07-2012, 05:46 PM)Dave Wrote: Looking good Ash! how much did you pay for the shells?

the con rod shells?

(29-07-2012, 08:42 AM)spillage Wrote: scrap it lol
CensoredCensored lol
(24-12-2011, 01:18 PM)ash23 Wrote: 2" isnt taht the standard size?


not much has hapend just recent only picked a few parts up

picked a bosch up of tom (slate38) gave it a quick clean Smile

[Image: 2011-12-24124207.jpg]

jp's lda pin

is that what mine should look like haha


[Image: 2011-12-24124158.jpg]

and had pirtek in at work and they made me a nice stailnless braided oil hose

[Image: 2011-12-24125929.jpg]
lol that ne is the one in your car Big Grin
oh hahah wheres mine lol
not much of a update but....
[Image: 2012-09-11063251.jpg]
Really like the look of this all round; nice clean example! Top stuff mate!
Phaes 1 GTI 6  -  Onyx Black
Not been been this thread for a while but things are looking awesome! Top quality. What turbo are you going to run?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Looking really good dude, liking the work you're putting into this Smile
ouuu scrap yard soon lol
(11-09-2012, 05:35 PM)ginge191 Wrote: Really like the look of this all round; nice clean example! Top stuff mate!

its not as clean as she looks in piks but still not to bad Big Grin

(11-09-2012, 05:42 PM)4WayDiablo Wrote: Not been been this thread for a while but things are looking awesome! Top quality. What turbo are you going to run?
cheers mate and just a td04 for now.......

(11-09-2012, 06:29 PM)Curt Wrote: Looking really good dude, liking the work you're putting into this Smile

thanks mateits silly the amount if time ive spent on this but i love it really Smile

(11-09-2012, 08:38 PM)spillage Wrote: ouuu scrap yard soon lol

not before yours does Tongue

well it was about time i got something done on this so nipped over to daves this morning for these (thanks mate )

[Image: 2012-09-15125854.jpg]

then fitted them to these
[Image: 2012-08-12145345.jpg]

which then ended up in here
[Image: 2012-07-10130437.jpg]
[Image: 2012-08-12145927.jpg]

then coverd them up Smile
[Image: 2012-09-01115112.jpg]

and how it looks now as im missing some bolts so need to nip to the scrappers Big Grin

[Image: 2012-09-15162023.jpg]

also lowerd the front down some more to match the rear and sorted my death trap brakes out Smile

c+c welcome as allway Big Grin
well fitted the rest of the body parts i got last week and fitted the morette masks i got of rich repaired really well Smile

some piks any way

[Image: 2012-09-29114655.jpg]
[Image: 2012-09-29114645.jpg]
[Image: 2012-09-29162148.jpg]
[Image: 2012-09-29162131.jpg]

de-badge? pffft badges are were its at Big Grin
[Image: 2012-09-28185715.jpg]
[Image: 2012-09-29161958.jpg]
[Image: 2012-09-29162037.jpg]

[Image: 2012-09-29161940.jpg]


much better
[Image: DSCF9042_zps9d6f890c.jpg]
[Image: DSCF9051_zps1ea2001b.jpg]
[Image: DSCF9067_zps42c1995d.jpg]
[Image: DSCF9059_zpse665da67.jpg]
[Image: DSCF9069_zps71627986.jpg]
[Image: DSCF9070_zps512f2681.jpg]
[Image: DSCF9081_zpsa7444cd2.jpg]
[Image: DSCF9096_zps8ef21457.jpg]
[Image: DSCF9093_zps3641144d.jpg]
[Image: DSCF9066_zps0693c6a5.jpg]
Awesome pics there :-)
[Image: IMG_20130925_181339_zps95df48fa.jpg]


Possibly Related Threads…
Thread Author Replies Views Last Post
Thumbs Down 3dr d-turbo project pic heavy jonny1.6 76 39,882 04-02-2013, 09:03 PM
Last Post: jonny1.6
  Ph2 d turbo project. Pretty pic heavy nath_ski 5 4,531 21-10-2012, 08:54 PM
Last Post: kernow_joe

Forum Jump:


Users browsing this thread: 1 Guest(s)