22-01-2016, 12:35 PM
(This post was last modified: 22-01-2016, 12:56 PM by Pgtips.
Edit Reason: added info
)
(21-01-2016, 08:28 PM)Toms306 Wrote: Hi guys,
Anyone know the specs for 306 bleed nipples? Looking for rear calipers but fronts may be useful to others.
I didn't realise there were so many with the same size nut.
http://www.biggred.co.uk/bleedscrews.php?pid=Bleed Screws
Just measured 1 of my old rear caliper nipples & the nut is 8mm /thread width is 6.92mm (so call it 7mm as its used )& the total length is 26.07mm from the top to the sharp point
Total thread length is 10mm measured from the bottom of the nut to the bottom thread.