Stage 3 XUD project

[Jenkosowls]

Certainly was messy! oil every where now haha. Directly fixed the cooler to the lower chasis panel as it was easier really ideally mor up the top behind the grill would have been a good idea as iirc kyle is now planning on running with out a grill. But problem was i was concerned that with out some serious brackets being made eventually they would break under stress and movment. at least down below on the chassis its nice and fixed and wont move. Also managed to get a better seal on the unions where it is know so doesnt leak. Cracked the steam cleaner out blasted it through the cooler and i was suprised at how much actually goes through the cooler so effective cooling wont be a problem at least. and in the lower area is right in front of the bumper mouth. As kyle knows i like to make a decent job much to his delight so made his fmic brackets better fixed less movement now and cable tied the new braided hoses together to all in all make a neater setup.

upped the fuelling slightly and played the lda spring setting to pump fuel in later on boost when the turbo kicks in and kyle seemed rather pleased with the result. he took me out in it and i cant believe how lethal the boost can be and seems fairly good spooling up with not much terrible lag and it pulls and pulls that was till the clutch decided it wasnt going to hold lol! compared to my standard k14 its completely different!