|
Fitting an ml6
|
26-02-2017, 04:11 PM
clutch and gear lever is relatively simple, 206 master fitted to adapted d9 406 or c5 pipework and slave cylinder.
shifter is essentially remove all the original rods and fit the cable setup, mak some brackets to hold the box up
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Fitting an ml6 - by madmadmax - 18-02-2017, 03:02 PM
RE: Fitting an ml6 - by allye - 18-02-2017, 08:01 PM
RE: Fitting an ml6 - by welshpug - 18-02-2017, 09:34 PM
RE: Fitting an ml6 - by zx_volcane - 19-02-2017, 06:52 AM
RE: Fitting an ml6 - by madmadmax - 26-02-2017, 04:03 PM
RE: Fitting an ml6 - by welshpug - 26-02-2017, 04:11 PM
RE: Fitting an ml6 - by madmadmax - 03-03-2017, 10:10 PM
RE: Fitting an ml6 - by madmadmax - 10-03-2017, 06:37 PM
RE: Fitting an ml6 - by madmadmax - 02-04-2017, 06:53 PM
RE: Fitting an ml6 - by allye - 03-04-2017, 10:51 AM
RE: Fitting an ml6 - by madmadmax - 03-04-2017, 07:23 PM
RE: Fitting an ml6 - by zx_volcane - 04-04-2017, 05:32 AM
RE: Fitting an ml6 - by madmadmax - 04-04-2017, 08:13 PM
RE: Fitting an ml6 - by ronj - 06-04-2017, 08:52 AM
RE: Fitting an ml6 - by madmadmax - 02-06-2017, 06:05 PM
RE: Fitting an ml6 - by madmadmax - 02-07-2017, 04:43 PM
Fitting an ml6 - by bashbarnard - 02-07-2017, 05:38 PM
RE: Fitting an ml6 - by madmadmax - 02-07-2017, 09:36 PM
RE: Fitting an ml6 - by welshpug - 03-07-2017, 09:45 AM
RE: Fitting an ml6 - by darrenjlobb - 03-07-2017, 12:17 PM
RE: Fitting an ml6 - by madmadmax - 04-07-2017, 05:15 PM
RE: Fitting an ml6 - by welshpug - 04-07-2017, 07:50 PM
RE: Fitting an ml6 - by darrenjlobb - 04-07-2017, 09:28 PM
RE: Fitting an ml6 - by madmadmax - 17-10-2017, 07:19 PM
|
