19-09-2015, 06:58 AM
to test with a multimeter set to ohms
measure the resistance between body thread and tip termination
for a 20amp plug it should be less than 2 ohms
you can do this with them still in the head
but you will need to disconnect the link bar on the tip terminations to be able to test each individual plug for soundness
measure the resistance between body thread and tip termination
for a 20amp plug it should be less than 2 ohms
you can do this with them still in the head
but you will need to disconnect the link bar on the tip terminations to be able to test each individual plug for soundness
https://www.check-mot.service.gov.uk/
GTI6 Info
Don’t drive faster than your guardian angel can fly.