31-08-2015, 05:02 PM
yes i did that when fitting the belt 
its a case of now pinning it all clamping the pulleys,
slackening the verniers,
slackening the belt,
re tension to 90 degrees then, 21Nm
re bolting the verniers, 40Nm
un pinning,
rotate 4-6 times,
re pin to re check,
remove pins n tools and Vrmmmm to check
stop
refit covers

its a case of now pinning it all clamping the pulleys,
slackening the verniers,
slackening the belt,
re tension to 90 degrees then, 21Nm
re bolting the verniers, 40Nm
un pinning,
rotate 4-6 times,
re pin to re check,
remove pins n tools and Vrmmmm to check
stop
refit covers

https://www.check-mot.service.gov.uk/
GTI6 Info
Don’t drive faster than your guardian angel can fly.