27-05-2015, 08:29 PM
The car is far from clean today its dirty!
ive still got to clean it before show
what ive done for the mod is......
the impact switch has 2 wires to the bottom,
connect one wire of the same gauge to each wire,
run wires to engine bay fuse box.
crimp spade crimps on each wire.
when on track insert 30amp fuse into the spades to bridge the kill switch.
if the switch activates the load is taken through the fuse bypassing the kill switch
remove fuse to turn car back to standard
ive still got to clean it before show
what ive done for the mod is......
the impact switch has 2 wires to the bottom,
connect one wire of the same gauge to each wire,
run wires to engine bay fuse box.
crimp spade crimps on each wire.
when on track insert 30amp fuse into the spades to bridge the kill switch.
if the switch activates the load is taken through the fuse bypassing the kill switch
remove fuse to turn car back to standard
https://www.check-mot.service.gov.uk/
GTI6 Info
Don’t drive faster than your guardian angel can fly.