Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fitting bigger turbo shortly
#7
Yes there is lag, it's a bigger turbo than was meant for your car.

It wont be on full blow till about 3k RPM and will blow all the way past the redline if you have modded the governor in the Bosch pump, if that is what you want.

It is a cheap and plentiful turbo which is very robust and easy to fit in the grand scheme of things.

There are many better turbos out there, but if you have limited money and are looking to gain knowledge about your car and how to mod it, it isn't a bad place to start as it has been done many times before, so the things you need to know are out there if you look for them.
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:


Messages In This Thread
Fitting bigger turbo shortly - by Owen_G_ - 26-02-2015, 01:25 PM
RE: Fitting bigger turbo shortly - by Owen_G_ - 26-02-2015, 05:26 PM
RE: Fitting bigger turbo shortly - by Piggy - 26-02-2015, 06:04 PM
RE: Fitting bigger turbo shortly - by Owen_G_ - 26-02-2015, 07:31 PM
RE: Fitting bigger turbo shortly - by Piggy - 26-02-2015, 07:36 PM
RE: Fitting bigger turbo shortly - by Danny Wideboy - 26-02-2015, 07:59 PM
RE: Fitting bigger turbo shortly - by Owen_G_ - 27-02-2015, 12:54 AM
RE: Fitting bigger turbo shortly - by ADV_93 - 27-02-2015, 04:36 PM
RE: Fitting bigger turbo shortly - by Piggy - 07-03-2015, 11:25 PM
RE: Fitting bigger turbo shortly - by Owen_G_ - 27-02-2015, 06:54 PM
RE: Fitting bigger turbo shortly - by Owen_G_ - 28-02-2015, 12:50 PM
RE: Fitting bigger turbo shortly - by bashbarnard - 07-03-2015, 10:46 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Bigger turbo suggestions? Something handy found? Logue1996 8 4,749 28-07-2017, 10:39 PM
Last Post: Chris_90
  bigger turbo adapters craig-dodd 16 9,187 04-02-2017, 05:48 AM
Last Post: Dave
  Fitting turbo pbell283 9 2,246 21-05-2014, 06:38 PM
Last Post: pbell283

Forum Jump:


Users browsing this thread: 1 Guest(s)