23-04-2014, 07:26 AM
I would talk to some of the eBay sellers and see if they would sell the bolts individually to you? I wouldn't want to mess about cutting anything down bud.
I would also check what the back of your alloy would look like. You could use bolts where the heads protrude from the face of the spacer if you were running Cyclones, since the would be no material pressed up against the spacer (it would sit in one of the gaps between the bolt-holes if that makes sense).
What does the mating face of your new alloy look like?
I would also check what the back of your alloy would look like. You could use bolts where the heads protrude from the face of the spacer if you were running Cyclones, since the would be no material pressed up against the spacer (it would sit in one of the gaps between the bolt-holes if that makes sense).
What does the mating face of your new alloy look like?
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
![[Image: Sig500x130.png]](http://i430.photobucket.com/albums/qq25/chris_rx71/Sig500x130.png)