18-03-2014, 08:13 PM
(This post was last modified: 18-03-2014, 08:15 PM by Danny Wideboy.)
Nothing at all at the moment, Engine comes back out this weekend though and gauze is to be fitted/a seive is to be stolen from the kitchen.
Just while it's out I wondered what peoples opinion was on the 2" outlet and K14 elbow and if that could be my problem. Adapter plates can be made up in the shed if needs be.
It is pulling quite well, but it has never tried to break traction under full load on boost, even in first, in the dry. Getting about 19-20 psi in third on full boost, about 21-22 in 4th/5th.
Should note I am still on the top mount interwarmer for now.
Just while it's out I wondered what peoples opinion was on the 2" outlet and K14 elbow and if that could be my problem. Adapter plates can be made up in the shed if needs be.
It is pulling quite well, but it has never tried to break traction under full load on boost, even in first, in the dry. Getting about 19-20 psi in third on full boost, about 21-22 in 4th/5th.
Should note I am still on the top mount interwarmer for now.
