06-03-2014, 03:03 PM
Id have to get another line made up Dave, with a 12mm banjo on it as opposed to the 10mm thats on it at present.
Unfotunately due to the turbine housing on this particular GT20 it sits an inch further up or else i could have used the original hard lines. No amount of bending will get them to fit i dont think.
I think helicoil is a no go anyway. They wouldnt be the correct size ie a M10x1.5 helicoil doesnt need a hole as big as an M12x15 to work. It only needs a drill bit of 10.5mm to work.
Unfotunately due to the turbine housing on this particular GT20 it sits an inch further up or else i could have used the original hard lines. No amount of bending will get them to fit i dont think.
I think helicoil is a no go anyway. They wouldnt be the correct size ie a M10x1.5 helicoil doesnt need a hole as big as an M12x15 to work. It only needs a drill bit of 10.5mm to work.